Even Flat Spray Nozzles VE / VEP [Spray pattern] [Spray distribution] • Flat spray pattern with uniform distribution throughout pattern area. • Even spray impact across the entire spray [Standard Pressure] Cleaning: Automotives, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates, steel pieces, wires Spraying: Etchants, oils, lubricants, liquids, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization (When with a strainer, add 2-5 g to the above mass.) [Note] Appearance and dimensions may differ slightly depending on materials and nozzle codes. A Nozzle (0Ceramic orifice (DAdhesive: Araldite® (3)Body) ©Strainer / ©Strainer holder ©Strainer screen [S316] \

Even Flat Spray Nozzles

Even Flat Spray Nozzles Pipe Conn. Spray Angle Spray Capacity - (without Strainer) When Spray Capacity Code is 03 or 04 or 05, "(Al_99)n is indicated at the end of nozzle description.

Effective Use of Even Flat Spray Nozzles Spray Distribution Even flat spray nozzles are designed to produce an even spray distribution to even out the cleaning power in the spray width direction and are suitable for cleaning when using one nozzle. When using even flat spray nozzles In multiple- nozzle arrangements, the overlapping spray distribution may be inferior to that of standard flat spray nozzles. Nozzle spacing Tightening Torque For high-pressure cleaning, highly wear-resistant CERJET® nozzles with ceramic orifice inserted are most suitable. However, if screwed too tight, the nozzle body,...