Group: H.Ikeuchi and Co.,Ltd
Catalog excerpts
Compact, efficient, energy-saving humidifiers
Open the catalog to page 1IKEUCHI’s Atomization Technology What is Dry Fog? Dry Fog is ultra-fine "non-wetting" fog, which doesn't wet the objects it touches. AKIMist® "E" produces a large amount of Dry Fog. Why is Dry Fog non-wetting? Small droplets rebound from an object, but large droplets burst and wet the object. Dry Fog droplets are so fine that they do not burst or wet the objects it touches. Large droplets How our Dry Fog is produced Atomized droplets, sprayed out from the two orifices apart, collide with each other in the center. Simultaneously they generate ultrasonic waves of 33–40 kHz to further atomize...
Open the catalog to page 2AKIMist ® "E" Installation Example in Many Industries Electronics INDEX IKEUCHI’s Atomization Technology 1 —————————————— AKIMist® "E" 3 —————————————— Optional/Related products 5 —————————————— ► AE-UT Adaptor 5 ———————————— Pipe Connection Kits 5 ———————————— AKIMist® "E" TN 6 ———————————— AE-KIT 6 ———————————— AE-T set 6 ————————
Open the catalog to page 3AKIMist® "E" Dry Fog Humidifiers Compact, efficient, energy-saving humidifiers create quality fog with low air consumption! Dimensions Materials ●Body: PP, Stainless steel 303 ●Nozzle: Stainless steel 303, PPS, fluorocarbon resin ●Other parts: NBR, FKM (O-ring, Packing) Pipe conn. size Pipe conn. size ●Approx. 340 g (Loaded) Note: ●Before disassembling, close the water valve. ●As main parts are made of plastic, handle AKIMist® "E" with care. (For details, see Instruction Manual.) ●Stop plugs are enclosed to reduce the number of nozzles used. ø77 125 (126 when with nozzle type 03B) ●Quality...
Open the catalog to page 4High quality, silky Dry Fog Sauter mean droplet diameter: measured by a laser analyzer Spray volume: (per nozzle) 03C nozzle type with clog-resistant nozzle tip produces non-wetting Dry Fog (ultra-fine fog) of uniform quality. Our Dry Fog, with its ability to humidify target spaces without wetting nearby machines or products, is ideal for use in electronics factories or where wetting is not allowed. ■03C Nozzle Performance Air pressure MPa in L/min, Normal (SCFM) Note: Use under the air pressure of between 0.2 and 0.5 MPa (29 and 73 psi). at air pressure of 0.3 MPa (44 psi) Spray volume in...
Open the catalog to page 5Optional/Related products AE-UT Adaptor (optional) ■Aiming Dry Fog where needed ■Intensive large volume spraying AE-UT Adaptor enables you to adjust spray direction as desired, just by installing it between the nozzle and the humidifier body. You can easily attach and remove it by hand. Chemical-resistant type is also available. Note: Stop spraying before you change the direction. Pipe Connection Kits (optional) Convenient pipe connection kits for easy installation of AKIMist® "E". These kits come assembled. ● Bolts for fixing mounting plate are not included and need to be prepared by...
Open the catalog to page 6Chemical-resistant AKIMist® "E" TN Titanium is applied to the liquid contact parts, for spraying of chemical solution. Note: This product is sold without pipe connection kit. ●Disinfection, sterilization in food factories, hospitals/ pharmaceutical plants ●Disinfection, deodorization in egg farms, livestock barns (Available only with nozzle type 03C) All the components for an efficient humidification system in one DIY kit. Just supply the electricity and compressed air. Nozzle unit (AKIMist®"E") Piping unit ●You can choose the contents of AE-KIT freely to suit your factory size and layout....
Open the catalog to page 7Installation & Ancillary Devices For minimal maintenance and long life, clean air and purified water must be supplied to the system. IKEUCHI, having vast expertise, provides a wide range of ancillary devices for purifying water/air and automatic humidity control. Humidity sensor Humidity controller Water tank Pipe connection kit (Extra-cost option) AKIMist®"E" Water deionizer Accumulator Water pressure regulator Water purifier Water filter Air relief circuit (Solenoid valve for air relief) Solenoid valve (for spray ON/OFF) When the solenoid valve unit is installed far from AKIMist® "E",...
Open the catalog to page 8Water Filter ●For removal of dust and moisture ●For removal of foreign particles contents over 0.3 μm from the compressed air with micro-fiber. ●Available in a variety of sizes. ●Air ancillary device set includes an air filter and oil filter with a manual discharging drain and nipple. ●Available in a variety of sizes. ●Water ancillary device set includes a water filter, a pressure regulator and nipple. Recommended pipe size chart (when using nozzle type 03C) The total number of 03C nozzles L/min, Normal (SCFM) 29 L/min, Normal (1.08 SCFM) × the number of nozzles Water consumption...
Open the catalog to page 9Benefits of Humidification 1. Static Charge Prevention ■Relation between humidity and static charge Bumper static charge voltage (kV) Helps to eliminate static electricity problems, improve product quality, and reduce the number of defects. ■Humidification and cooling effects Our Dry Fog humidification system also yields a cooling of about 2°C, which helps to reduce air conditioning cooling costs. Relative humidity Energy cost for Dry Fog humidification is only one-fifth of that for steam humidification. Winter outside air temperature and humidity: 6°C, 48% RH ■Comparison of the operating...
Open the catalog to page 10Customer Case Studies 1. Printing Web Offset Printing Process Humidity control suited to each printing press type and process has a big impact. ●AKIMist® has quickly gained acceptance as nozzle-type humidification systems are becoming popular in the printing industry. ●AKIMist® has the best track record in the Japanese printing industry, with over 30 years of strong experience. ●For sheet-fed printing, UV printing, Flexo printing and others, we have the best-suited solutions for all kinds of printing presses. Improved productivity and quality, reduced waste paper Paper jams, poor folds,...
Open the catalog to page 11All Ikeuchi Europe catalogs and technical brochures
-
Air pollution prevention
8 Pages
-
Tank cleaning catalog
44 Pages
-
Iron and steel industry
6 Pages
-
Car wash spray nozzles
5 Pages
-
Air Nozzle Catalog
72 Pages
-
Flat type plastic
1 Pages
-
Stainless steel
1 Pages
-
AE-UT Adaptor
1 Pages
-
Catalog on pneumatic spray nozzles
100 Pages
-
ROTARY JETTER RJ series
2 Pages
-
Air Blow Gun with TAIFUJet
1 Pages
-
Catalog on Hydraulic Spray Nozzles
124 Pages
-
INVVEA
1 Pages
-
Trimming nozzle CM-F series
2 Pages
-
CRP-AL99
2 Pages
-
DDRP
2 Pages
-
UZUJP
1 Pages
-
TSP
2 Pages
-
JJHP
1 Pages
-
INVV&INJJX
2 Pages
-
IKEUCHI company profile
20 Pages
-
VVEP-HL
2 Pages
-
VVP-stainless
2 Pages
-
WVVEP
2 Pages
-
Self-cleaning MOMOJet®
2 Pages
-
Air duster gun
1 Pages
-
BIM fine fog spray gun
1 Pages
-
TAIFU
2 Pages
-
CoolPescon
8 Pages
-
Universal joint WUT series
1 Pages
-
AW series
2 Pages
-
SO-V series
2 Pages
-
SLNB series
2 Pages
-
Two Directions EJX series
2 Pages
-
BRASINKan®
4 Pages
-
COOLKIT A
1 Pages
Archived catalogs
-
Catalog on hydraulic spray nozzles
115 Pages
-
JJX
1 Pages
-
Handy Fog Cooler Kit
1 Pages
-
COOLKIT B
1 Pages
-
COOLKIT series
1 Pages
-
Air nozzles
20 Pages
-
TAIFUJet Air nozzles
12 Pages
-
plastic nozzle
12 Pages