Disposable and reusable crushing systems
19Pages

Disposable and reusable crushing systems

Disposable and reusable crushing systems IKA has a long history of manufacturing batch mills and dispersers for a wide range of applications. For applications where cross-contamination between batches is a risk to analysis results or leads to a pains aking cleaning process, IKA’s disposable systems offer unique designs and patented t technologies for contamination-free results with minimal operator effort. As IKA is committed to a sustainable future, all disposable chambers and tubes are made from recyclable materials: e.g. polypropylene, polyethylene. In addition, there are also reusable...

4 | Tube Mill control | Tube Mill 100 control Tube Mill control | Tube Mill 100 control | 5 Tube Mill control & Tube Mill 100 control Features Available in two sizes Interval grinding /// The world´s first disposable grinding system With this batch mill, you can set individual grinding intervals depending on the sample. YOUR BENEFITS › Thanks to individual grinding intervals, even light and oily samples can be comminuted more uniformly. Tube Mill control Ident No.: 0004180000 Tube Mill 100 control Ident No.: 0020007144 USB interface The Tube Mill control and Tube Mill 100 control have an...

Grinding chambers III Disposable and reusable With the Tube Mill and its associated grinding chambers, IKA offers a laboratory batch mill for benchtop operation that can be used for even the smallest sample sizes. In addition to the classic stainless steel beater, IKA also supplies titanium blades as well as curved stainless steel blades -especially suited for mixing fine powders. Reusable grinding chambers YOUR BENEFITS > Avoid costs when working with small numbers of samples through multiple use > Reduce waste and consumables > Fast alternative to batch milling process > Small sample size...

Multi-use milling chamber MMT /// An alternative to disposable milling chambers How MMT re-usable chambers improve your current method with no loss of time compared to consumable chambers: Elevate your lab's productivity and environmental responsibility by maintaining a cycle of 12 MMT milling chambers. With this approach, 6 MMT chambers are dedicated to sample milling, while the other 6 can be effortlessly disassembled and prepared for a dishwasher or autoclave cycle. You can maintain a nearly identical hourly sample milling rate compared to disposable MT 40 chambers, while significantly...

Application Packages Tube Mill control is a highly versatile milling device suitable for a broad range of applications used in various industries. Amongst other applications, the mill is suitable for grinding seeds, such as corn and wheat. The ability to cool the sample with dry ice expands applications tremendously. The transparent grinding chamber and cover facilitate observation at all times. Cryo grinding with dry ice Tube Mill control can also be used to process moist, fatty, elastic and fibrous samples. Dry ice is introduced directly into the grinding chamber in order to embrittle the...

Technical data FAQ 1. How finely can the samples be ground? The samples can be ground to a particle size of 1 – 100 μm depending on the sample. 2. What is the minimum quantity in the grinding chamber? Even a single grain can be milled with the Tube Mill control. TECHNICAL DATA TUBE MILL CONTROL TUBE MILL 100 CONTROL Process type Operating principle Cutting / impact Cutting / impact Motor rating input Motor rating output Speed range Speed deviation Feed grain size max. Power-ON time Mill feed can be cooled in milling chamber with dry ice Permissible ambient temperature Permissible relative...

14 | ULTRA-TURRAX ® Tube Drive & Tube Drive P control ULTRA-TURRAX ® Tube Drive & Tube Drive P control | 15 ULTRA-TURRAX® Tube Drive & Tube Drive P control /// World's first universal disposable disperser system Hermetically sealable sample tubes Disposable tubes The sealable disposable tubes have been optimized for your application. YOUR BENEFITS › ess cleaning required and the risk of cross-contamination is L ruled out › eproducible test conditions R Programmable test conditions Time, energy, volume: You specify and systematically program the test conditions (UTTD P control only)....

ST TUBE Tube with stirring device Suitable for: › Mixing › Stirring › Extractions › Preparation of soil sample suspensions DT TUBE Tube with rotor-stator element Suitable for: › Dispersion › Homogenization › Suspensions › Pharmacokinetics › Metabolism studies › Diagnosis All tubes are also available with a pierceable membrane and gamma-sterilized BMT G / S TUBE Tube for grinding with glass balls (G) or with stainless steel balls (S) Suitable for: › Dry milling of dry and brittle samples (e.g. kaolin, gypsum, colored pigments, tablets) › Cell maceration › Processing of materials mixed with...

ST TUBES WITH STIRRING ELEMENT

Packages ULTRA-TURRAX® Tube Drive P control Workstation Ident. No. 0025005836 Scope of delivery: ULTRA-TURRAX® Tube Drive P control ST-20 Stirring tubes, 20 ml, 3 pcs. DT-20 Dispersing tube, 20 ml, 1 pc. Glass balls (6.0 mm) for BMT tubes Stainless steel balls (5.0 mm) for BMT tubes Our customers' application highlights UTTD control Pharma Solution Ident. No. 0010013297 UTTD control Life Science Solution Ident. No. 0010013296 Scope of delivery: ULTRA-TURRAX® Tube Drive P control DIS-300-S-M.10 Dissolver tubes, 300 ml, 10 pcs. Scope of delivery: ULTRA-TURRAX® Tube Drive P control DT-20...

Technical data FAQ | ULTRA-TURRAX® Tube Drive 1. What material are the tubes made of and against which solvents are they resistant? The tubes are manufactured from polypropylene (PP), polyetheretherketone (PEEK), a thermoplastic elastomer (TPE), polyethersulfone (PES) and polyetheretherketone with teflon (PEEK + PTFE). The balls are manufactured from either stainless steel AISI 304 or soda-lime glass. All plastic materials conform to the FDA regulations. The parts have a good stability against weak acids, chlorides, hypochlorides and many other chemicals. Rotor TECHNICAL DATA ULTRA-TURRAX®...