Issue Version V0424EN - Technical changes reserved Twist/Lay/Pitch Length Detector - TLD For measuring the twist/lay/pitch length of sheathed cables Product No.: 402.0013.01 Measurement Devices Devices for Sample Preparation Technical Details: Size (width x length x height) Supply Voltage Input Power Aluminium, Stainless Steel, PVC Measuring accuracy Measuring according to standards Measurable twist lengths min. 10 mm | 0.39“ / max. 800 mm | 31.5“ (with the standard measuring distance) ATTENTION: Customizations possible on request (Please send some samples) Measuring distance 800 mm | 31.5“ ATTENTION: Customizations possible on request Sample outer diameter min. 2 mm | 0.08“ (requires an adapter for fixing thin cables) ATTENTION: Customizations possible on request (Please send some samples) Driving speed of the sensor The speed can be set in the configuration file ATTENTION: The slower the driving speed, the more accurate the measurement Device details: Measurements according to the standards LV212 und LV122 The twist length of the samples is measured without removing the sheath → this ensures a precise measurement Traditional methods manipulate the sample (cable stripping / unwinding of conductors) → a precise measurement is not possible anymore Via a PC connection, the measuring results can directly be exported Fully automatic: By clicking one button, the measuring sensor automatically moves along the sample Result file: It is possible saving the following result data into a text file (export function): ▪ Amount of twists ▪ Measured distance (distance from the first twist to the last overlapping twist) ▪ Driving distance of the sensor ▪ Minimum / Maximum twist length ▪ Average of the detected twist lengths The calibration is performed with an especially designed master-sample (calibration piece) iiM AG Neuer Friedberg 5 98527 Suhl GERMANY Laboratory Equipment for Material Tests