Catalogs >
iiM GmbH >
Data sheet Splitting Cutter SC

Data sheet Splitting Cutter SC
1Pages

Catalog excerpts

Issue Version V0424EN - Technical changes reserved Sample preparation for heat elongation and tensile tests conforming to standards Product No.: 402.0006.01 Measurement Devices Technical Details: cables Size (width x length x height) Steel housing, hardened steel spindle, aluminium Stainless steel blade Setting the cutting thickness Sample preparation according to cable standards Especially designed for soft materials. Hard materials, e.g. PE, XLPE, HDPE, or hard rubbers partially possible depending on the sample characteristics. To eliminate any doubts, please send samples to iiM AG for evaluation. Devices for Sample Preparation Laboratory Equipment for Material Tests Device details: Device is according to the cable standard IEC 60811 -501, -507 (Heat elongation test, tensile test) The samples are taken from the inner side of the sheath and isolator All grooves and/ or conductive layers are removed Developed to slice samples with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”) Operating principle: Sample material iiM AG Neuer Friedberg 5 98527 Suhl GERMANY 1. Set the cutting thickness 2. Insert the sample for cutting 3. Cut the sample 4. Remove the sample

Open the catalog to page 1

Data sheet Splitting Cutter SC 1Pages

Catalog excerpts

All IiM GmbH catalogs and technical brochures

Data sheet Splitting Cutter SC
1Pages