VisioCablePro brochure
12Pages

{{requestButtons}}

Catalog excerpts

VisioCablePro brochure - 2

About our company iiM AG – the name stands for innovative and high quality products in the field of optical metrology as well as LED lighting systems for Machine Vision. For more than 20 years our two business units have developed and produced for various industries at our sites in Suhl, Nuremberg, Backnang and Weißensberg. The division „Cable Measurement Engineering“ offers solutions for quality assurance during cable production.The second business unit „LED Lighting“ with its brand LUMIMAX® is specialized in powerful LED Lighting for Machine Vision. Several international sales and service...

Open the catalog to page 2
VisioCablePro brochure - 3

VisioCablePro® – Expert tools for measuring cables Sample preparation Removal of the electrical conductor Dumbbell specimen punching according to standards Quality control and evaluation Software interface for CAQ systems (Aesa CIQ, ProCable 3, Advaris) Storage of test results and simultaneous comparison with saved test plan nominal values VisioCablePro Product Overview | V0622

Open the catalog to page 3
VisioCablePro brochure - 4

Cable measurement devices For measuring geometries on cable insulation and jackets according to the standards IEC 60811 -201; -202; -203, LV112, ICEA S-94-649 iiM cable measurement engineering has especially been developed to carry out cross-sectional measurements, which specifically fulfill cable producers requirements to measure the geometrical features of insulating skins and cable sheaths. The complete package consists of one of the devices from the VisioCablePro® series VCPX5, AlphaOne, VCPLab and VCPEx+ as well as the measuring software VELOX and optionally the CAQ-System ProCable 3....

Open the catalog to page 4
VisioCablePro brochure - 5

Your guarantee for secure quality testing of geometrical attributes of cables, isolated conductors and hosepipes Excellent traceability and repeatability Reliable evaluation of obtained measuring results Intuitive operation – designed for use directly next to the extrusion line Test plan development Order administration Archiving of obtained test results Creation of result lists according to the test plans (product report recipes) Correct and structured depostition of test results Exceedance of tolerance limits are immediately reported and saved Possibility to connect with other devices...

Open the catalog to page 5
VisioCablePro brochure - 6

Cutting machines For an optimal sample preparation With the devices of the ORC family (O-Ring Cutter) it is very easy to cut cable samples according to the standard IEC 60811. ORC VC65, ORC 80 and ORC 150 enable to cut thin, even and parallel samples with a smooth surface. The ORC Micro is optimal for cutting very small cables. The cutting machines are often used in combination with the VCPX5, AlphaOne or VCPLab. Advantage: Enormous improvement of the measuring accuracy by reducing the user influence, sample irregluarities or shadows. Sample preparation Material tests and geometric...

Open the catalog to page 6
VisioCablePro brochure - 7

Devices for Sample Preparation For preparing cable samples according to the standards The product portfolio is supplemented by innovative solutions for cable sample preparation as well as performing various material tests according to standards in laboratories, e.g. the Splitting Cutter for standardised slices to further process and use in the Hot Set Test or Tensile Test. Thus, you receive a complete package for your quality assurance and thereby optimize the production, increase the product quality and minimize incurred costs substantially. Material tests and geometric measurements...

Open the catalog to page 7
VisioCablePro brochure - 8

Laboratory Equipment for Material Tests For measuring cable samples according to the standards By using the Hot Set Test you can easily perform an elongation and a heat pressure test of your cable samples. With this Hot Set Test device, you need not attach your samples in the oven, as with other products. You just place the complete device with the samples into the oven. In addition to the Hot Set Test for thermal testing, iiM also offers instruments for Cold Impact and Cold Bend Testing under the VisioCablePro® brand. Material tests and geometric measurements according to the standards...

Open the catalog to page 8
VisioCablePro brochure - 9

Further Devices for the Cable Industry For supporting sustainable production and resource conservation Efficient products towards supporting sustainable production and resource conservation in the cable and wire manufacturing industry are also available from iiM under the VisioCablePro® Brand. Our automatic bobbin unwinder ABU24 makes it possible to simultaneously, gently and quickly feed up to 24 braiding spools back into the braiding process, thus reducing costs. Automatic Bobbin Unwinder - ABU24 ■ Enables up to 24 braiding spools to be unwound at the same time returns the winding...

Open the catalog to page 9
VisioCablePro brochure - 11

Your notes VisioCablePro Product Overview | V0622

Open the catalog to page 11
VisioCablePro brochure - 12

Our distribution partners Worldwide on site for you – www.iim-AG.com/distributing-agents Contact iiM AG measurement + engineering Neuer Friedberg 5 98527 Suhl GERMANY Phone: Fax: www.iim-AG.com VisioCablePro.Sales@iimAG.de

Open the catalog to page 12

All IiM AG measurement + engineering catalogs and technical brochures