Instruction manual Foil heaters

Instruction manual Foil heaters

General Safety Instructions and Warnings • Carefully review this manual before use. • As the operating authority, you are legally responsible to prevent direct and indirect risks. • Perform a risk assessment before using this equipment to ensure your safety and the safety of others. • Do not remove warning labels. • Recommendation: Place a warning sign "Caution: electrical heating, burn danger" on the outside, close to the heater. • Only authorized personnel should handle heating elements and conduct installation and maintenance. • Wear safety goggles, protective gloves, and high-temperature...

- Instruction manualFoil heaters • All connections should be checked for tightness. • Install the heater only on the geometry they are designed for. • Ensure there are no cables or adhesive tapes under the heater. • Check for any sharp edges that may damage the product. • Foil heaters are designed for surface heating and should always be mounted on a surface. • Foil heaters are only moisture-resistant and are not suitable for immersion. Installation of Self-Adhesive foil Heater 1. Handle the heater with care, avoiding bending, creasing, or folding, especially while the backing paper is still...

Instruction manual Foil heaters Installation of Non-Adhesive silicone Heater with RTV silicone rubber 1. Ensure that the surface to be heated is clean of grease and dirt, using a cleaning solvent if necessary, and smooth to prevent the formation of air pockets. 2. While the elements are flexible, handle them with care to avoid rough handling, folding, or creasing. 3. Ensure the silicone heater is free of dust and dirt; use a damp cloth for cleaning if necessary. 4. The surface must be warm to the touch for the glue to adhere properly. 5. Apply a thin layer of suitable silicone rubber adhesive...

Instruction manual Foil heaters 5. Visually inspect the heater installation to ensure that no air pockets can form. 6. Perform an electrically static test on the heater to verify correct element resistance reading and earth isolation. 7. Ensure that equipment fitted to the heater provides protection against electrical shock according to relevant European standards. Installation with straps 1. Ensure that the surface to be heated is free of grease and dirt, using a cleaning solvent if necessary, and smooth to prevent the formation of air pockets. 2. Handle the elements with care, avoiding rough...

- Instruction manual Foil heaters • Do not touch heating elements while in use. Risk of injury! • Please maintain a safe distance between the heating element and flammable materials during use. Working temperatures: - Silicone wire wound, non-adhesive from -60° to +250°C - Silicone etched foil, non-adhesive from -60° to +200°C - Polyimide (Kapton®), non-adhesive from -269° to +200°C - Silicone/polyimide, self-adhesive from -30° to +180°C • Heating elements have a specific temperature it can reach and several factors affect how hot it actually gets. These include the material being heated (how...

Instruction manual Foil heaters CE statement The CE declaration of conformity is not included in the scope of delivery but can be provided upon request. In accordance with our company policy, our products are CE-marked, indicating compliance with the recognized declaration within the European Economic Area (EEA) and EEC Directives. Since our products are provided as components according to customer specifications for installation by them as part of a final product, we cannot control the installation and conditions of the products. The customer will be responsible for determining the suitability...