*mydirectindustry

Tool Heaters

Product catalog summary

Technical Specifications:
Tool heaters are available in various materials including aluminum, brass, stainless steel, and galvanized plate. The thickness of these materials ranges from 3 mm to 20 mm. The maximum operating temperature varies by material, with a range from 280°C to 550°C. The maximum load capacity is between 3.5 W/cm² and 5 W/cm², and the operating voltage is typically 230-250 Volts. High voltage stability is rated at 1000 Volt AC, and insulation resistance is 1 MOhm at 500 Volt DC. Performance tolerance is within 5%.

Dimensions:
Minimum and maximum dimensions for different heater types are specified. For example, FAK/FMK heaters range from 80 mm x 40 mm to 2000 mm x 500 mm, while RAM heaters range from 80 mm x 80 mm x 38 mm to 500 mm x 500 mm x 250 mm.

Types of Heaters:
Various types of heaters are available, including flat heaters (aluminum and brass compact), mineral insulated flat and frame heaters with pressure plates, and mica insulated flat and frame heaters.

Options and Customizations:
Heaters can be customized with different voltages, single or three-phase connections, additional cut-outs, thermocouple connectors, and additional insulation. Warning signs for hot surfaces and additional stiffener strips for larger dimensions are also available.

Connection Types:
Connections include direct axial, radial, and tangential plug connections, as well as clamp connections. These fittings are integral to the heating element and connect to the power supply cable.

Locations:
The company has locations in Germany, Austria, France, and Great Britain, with contact information provided for each site.

Catalog excerpts

TECHNICAL DATA TECHNISCHE DATEN TOOL HEATERS GROUP OF COMPANIES / FIRMENGRUPPE

Open the catalog to page 1

TOOL HEATERS WERKZEUGBEHEIZUNGEN Flat Heater aluminium compact Flachheizung Aluminium Kompakt Flat Heater brass compact Flachheizung Messing Kompakt mineral insulated Flat Heater with pressure plate mineralstoffisolierte Flachheizung + Eisendruckplatte mineral insulated Frame Heater with pressure plate mineralstoffisolierte Rahmenheizung + Eisendruckrahmen FAK thickness Auftragung brass Messing steel pressure plate / -frame Stahldruckplatte/ -rahmen galvanized plate verzinntes Weißblech operating voltage Betriebsspannung high voltage stability Hochspannungsfestigkeit insulation resistance Isolationswiderstand...

Open the catalog to page 2

TOOL HEATERS WERKZEUGBEHEIZUNGEN Options / Optionen > other voltages/single or three phase (star or delta connection) / andere Spannung, ein- oder mehrphasig (Stern-/ Dreieckschaltung) > with holes and/or thermocouple connector mit Bohrungen und/oder Wärmefühlerhalterung > RA/RAM: additional stiffener strips for side lengths greater than 500 mm RA/RAM: zusätzliche, aufgeschweißte Versteifungsleisten bei Kantenlängen größer als 500 mm > RA/RAM: in 2 or 4 pieces (2 or 4 separate connections) > additional cut outs / zusätzliche Aussparungen RA/RAM: in 2- bzw. 4-teiliger Ausführung (2 bzw. 4 separate...

Open the catalog to page 3

Locations Standorte Lampertheim Mitry-Mory Paris Linz Ihne & Tesch GmbH Am Drostenstueck 18 D-58507 Luedenscheid P.O. Box 1863 D-58468 Luedenscheid Keller, Ihne & Tesch KG Kunigundenstraße 13 D-68623 Lampertheim P.O. Box 5164 D-68612 Lampertheim Ihne & Tesch GmbH Aalener Straße 42 D-90441 Nuremberg P.O. Box 710143 D-90238 Nuremberg GREAT BRITAIN Keller, Ihne & Tesch GmbH Bahnhofstraße 90 A-3350 Haag KIT Electroheat Ltd. Office F10 Mexborough Business Centre College Rd GB-S64 9JP Mexborough FRANCE Celtic S.A.R.L. 2/4 Rue René Cassin ZAC La Villette-aux-Aulnes F-77290 Mitry-Mory

Open the catalog to page 4

Tool Heaters

Tool Heaters

Catalog excerpts

All Ihne & Tesch GmbH catalogs and technical brochures