*mydirectindustry

Control Units

Product catalog summary

Technical Specifications:
The control systems operate at a voltage of 230 Volt, 50/60 Hz, or 230/400 Volt for multi-zone units. They feature a yellow LED heat impulse display and a 4-digit LED display for both actual and nominal temperature readings. Sensors supported include types L, J, K, and PT100, with monitoring for thermocouple break and sensor polarity errors.

Control Features:
The systems utilize a 2-point D-PID control mode with automatic adaptation of control settings. Heat load and temperature monitoring are available with adjustable limit values. Start-up circuitry allows for adjustable start-up temperature, set level, and holding time. In case of temperature sensor loss, the last set level is maintained to avoid production interruption.

Options and Types:
Options include different operating voltages, wattages, special functions, and configurations for single and multi-zone units. Digital interfaces are also available.

Physical Specifications:
The casing dimensions vary by model, with options including 270 x 190 x 260 mm, 170 x 190 x 260 mm, and 140 x 180 x 190 mm. The units are finished in propac pebble gray or gray varnish.

Power and Connectivity:
Power supply is 230V / 16A / 50 Hz with fuse protection. The power exit is facilitated by a solid-state relay, and connections include a 3 m lead with a two-pin earthed plug. Sensor connections use a 4-pin connector, and alarm exits are available at 24V/DC.

Additional Features:
The systems include self-optimizing control settings, ramp and program functions, and alarm LEDs for temperature control. They also feature a fuse failure signal and switching status display of exits.

Company Locations:
The document lists multiple company locations across Germany, Austria, France, and Great Britain, providing contact information and addresses for each.

Catalog excerpts

TECHNICAL DATA TECHNISCHE DATEN CONTROL SYSTEMS GROUP OF COMPANIES / FIRMENGRUPPE

Open the catalog to page 1

CONTROL SYSTEMS REGELGERÄTE Types / Typen MCT operating voltage Betriebsspannung 230 Volt, 50/60 Hz or 230/400 Volt with multi zone units 230 Volt, 50/60Hz oder 230/400 Volt bei Mehrzonengeräten heat impulse display Heizimpulsanzeige actual temperature display Temperatur-IST-Anzeige nominal temperature display Temperatur-SOLL-Anzeige sensor Messfühler thermocouple break monitoring Fühlerbruchüberwachung error is displayed Fehler wird angezeigt sensor polarity Fühlerpolung error is displayed Fehler wird angezeigt control mode Regelverhalten 2-point D-PID Zweipunkt D-PID control settings Regelparameter...

Open the catalog to page 2

CONTROL SYSTEMS REGELGERÄTE Examples with power exit and one temperature measure point Beispielgeräte mit einem Leistungsausgang und einer Temperaturmessstelle MCT-1-E casing Gehäuse colour Farbe propac pebble gray varnish Propac kieselgrau lackiert power supply Netzanschluss gray varnish grau lackiert 230V / 16A / 50 Hz fuse protection 16A, FF 3500W power exit Absicherung 16A, FF 3500W Leistungsausgang fuse failure signal (mica lamp) Sicherungsaufallanzeige (Glimmerlampe) 3 m leads with two-pin earthed plug Netzkabel 3m mit Schukostecker power exit with solid state relay (wear-free) Leistungsausgang...

Open the catalog to page 3

Locations Standorte Lampertheim Mitry-Mory Paris Linz Ihne & Tesch GmbH Am Drostenstueck 18 D-58507 Luedenscheid P.O. Box 1863 D-58468 Luedenscheid Keller, Ihne & Tesch KG Kunigundenstraße 13 D-68623 Lampertheim P.O. Box 5164 D-68612 Lampertheim Ihne & Tesch GmbH Aalener Straße 42 D-90441 Nuremberg P.O. Box 710143 D-90238 Nuremberg GREAT BRITAIN Keller, Ihne & Tesch GmbH Bahnhofstraße 90 A-3350 Haag KIT Electroheat Ltd. Office F10 Mexborough Business Centre College Rd GB-S64 9JP Mexborough FRANCE Celtic S.A.R.L. 2/4 Rue René Cassin ZAC La Villette-aux-Aulnes F-77290 Mitry-Mory

Open the catalog to page 4

Control Units

Control Units

Catalog excerpts

All Ihne & Tesch GmbH catalogs and technical brochures