Group: IHI
Catalog excerpts
Fully Hydraulic Crawler Crane Lifting capacity 200 metric tons
Open the catalog to page 1Luffing Jib Crane evolved to equip Auxiliary Jib Conventional luffing tower crane Post Crane Selections are aveilable from: 1) 50-ton lifting with Post 2) 25-ton lifting with Luffing Jib 3) 13.5-ton lifting with Auxiliary Jib Simultaneous lifting by Post and Auxiliary Jib is not permitted. Middle Equalizer for Luffing Jib lifting is tentatively stowed on inner post when the Luffing Jib is dismantled.
Open the catalog to page 2General Dimensions Unit:mm Working radius High "A" frame folded High "A" frame middle position (*1) Boom foot Shoe width Standard equipment Performance Swing speed 1.7min-1(1.7rpm) [Constant swing speed 0.6min-1(0.6rpm) optional] Travel speed 0.9/0.6 km/h Gradability 30% (16.7 ) Engine Make Cummins Inc. Model QSL Type Water cooled, 4-cycle, direct fuel injection, turbocharged Rated output 242kW/2000min-1 Total piston displacement 8.9L Fuel tank capacity 400L Battery 12V x 2pcs. Main hoist system (Front left axle, also used for hoisting tower jib) Hydraulic motor Variable displacement axial...
Open the catalog to page 3Crane boom composition Max. Lifting capacity x working radius Max. boom length Max. boom length (main + jib) Main drum hoist/lowering Aux. drum hoist/lowering Rope speed Boom drum hoist/lowering Hook block capacity x Part line Hook block capacity x Part line Part line Boom drum hoist Counterweight Weight for body Total operating weight (with 18m boom) Average ground bearing pressure The following tables show standard combinations for each boom and jib length. Boom standard combination Boom length (m) Combination Boom length (m) Combination T he rope speed changes depending on the load....
Open the catalog to page 4W orking range (No load condition) Main boom + 1m auxiliary jib 27m boom 24m boom 21m boom 18m boom (basic) Height above ground level (m)
Open the catalog to page 5Main boom rated lifting loads (78ton counterweight, 16ton weight for body) Boom length (m) Working radius (m) Notes 1. Above rated loads are based on the machine being operated on firm level ground, within 78% of tipping load at any point of 360around the machine with forward stability factor of over 1.15. 2. Working radius is horizontal distance from center of rotation to a vertical line through the center of gravity of the load. 3. The weight of the slings, hook block(s) and auxiliary lifting devices must be considered to be a part of the load. Hook block weight: 200ton hook block2.70ton...
Open the catalog to page 61m aux. jib rated lifting loads (78ton counterweight, 16ton weight for body) Boom length (m) Working radius (m) Notes 1. Above rated loads are based on the machine being operated on firm level ground, within 78% of tipping load at any point of 360around the machine with forward stability factor of over 1.15. 2. Working radius is horizontal distance from center of rotation to a vertical line through the center of gravity of the load. 3. When the main hook block is installed, the lifting loads of jib must be reduced by the weight of hook block (main and jib) and other lifting devices. 200ton...
Open the catalog to page 7Aux. jib rated lifting loads (78ton counterweight, 16ton weight for body) 45.0 Boom length (m) Jib length (m) Offset angle Working radius (m) Offset angle Working radius (m) Boom length (m) Jib length (m)
Open the catalog to page 8Aux. jib rated lifting loads (78ton counterweight, 16ton weight for body) 60.0 Boom length (m) Jib length (m) Offset angle Working radius (m) Offset angle Working radius (m) Boom length (m) Jib length (m) Notes 1. Above rated loads are based on the machine being operated on firm level ground, within 78% of tipping load at any point of 360around the machine with forward stability factor of over 1.15. 2. Working radius is horizontal distance from center of rotation to a vertical line through the center of gravity of the load. 3. When the main hook block is installed, the lifting loads of jib...
Open the catalog to page 9W orking range (No load condition) min.4000(approx.) Combination of Post and Jib Jib length (m) Note: The rope speed changes depending on the load. Rope type Luffing jib crane Post/jib composition Post composition Place of use Rope diameter (mm) Guaranteed strength (t) Main drum 70.2 28 Aux. drum 70.2 28 Jib hoist 57.8 26 Post hoist 36.3 22 Jib suspension 104.0 34 Strut suspension 104.0 34 Post suspension 104.0 34 Main hook block (max. allowable for main hook) 54m post 51m post 48m post 45m post 42m post 39m post 36m post Note: :P ossible combinations Height above ground level (m) at Post...
Open the catalog to page 10Post rated lifting loads (78ton counterweight, 16ton weight for body) Jib offset angle Working radius (m) Post length (m) Jib length (m) Jib offset angle Working radius (m) Post length (m) Jib length (m) Jib offset angle Working radius (m) Post length (m) Jib length (m)
Open the catalog to page 11Post rated lifting loads (78ton counterweight, 16ton weight for body) Post length (m) Jib length (m) Jib offset angle Working radius (m) Post length (m) Jib length (m) Jib offset angle Working radius (m) Post length (m) Jib length (m) Jib offset angle Working radius (m)
Open the catalog to page 12Post rated lifting loads (78ton counterweight, 16ton weight for body) Post length (m) Jib length (m) Jib offset angle Working radius (m) Post length (m) Jib length (m) Jib offset angle Working radius (m) Post length (m) Jib length (m) Jib offset angle Working radius (m) 1. Above rated loads are based on the machine being operated on firm level ground, within 78% of tipping load at any point of 360around the mac hine with forward stability factor of over 1.15. 2. The weight of hook blocks must be considered to be a part of the loads. For tower jib For post 25ton hook block1.00ton 50ton hook...
Open the catalog to page 13Jib rated lifting loads (78ton counterweight, 16ton weight for body) 27.0 Jib length (m) Post angle Working radius (m) 1. Above rated loads are based on the machine being operated on firm level ground, within 78% of tipping load at any point of 360around the machine with forward stability factor of over 1.15. 2. The weight of hook blocks must be considered to be a part of the loads. 50ton hook block1.00ton 30ton hook b lock1.00ton 25ton hook block1.00ton 13.5ton hook b lock0.60ton 3. Depending on the number of part lines, rated load is limited as follows: 1part lineup to 13.5ton 2part...
Open the catalog to page 14All IHI Construction Machinery limited catalogs and technical brochures
-
CCH1400-6
40 Pages
-
CCH1000-6
24 Pages
-
45V4-F
6 Pages
-
mini excavator 28N 35N
4 Pages
-
55N4
2 Pages
-
85V4
2 Pages
-
25V4-F(Tier 4)
2 Pages
-
9VX3- 17VX3
2 Pages
-
CCH3000
32 Pages
-
CCH1000
24 Pages
-
CCH700
24 Pages
-
CCH550-3II
12 Pages
-
CL series
6 Pages
-
30NX2
4 Pages
-
15NX
4 Pages
-
45V4, 55V4, 60V4
6 Pages
-
35V4
4 Pages
-
30V4
4 Pages
-
CL35, CL45
6 Pages
-
CCH1200EX
8 Pages
-
CCH700EX
8 Pages
-
CCH2800
12 Pages
-
CCH2500
12 Pages
-
CCH1200-5
16 Pages
-
CCH900
8 Pages
-
55N3
1 Pages
-
55VX
1 Pages
-
50VX
1 Pages
-
35VX
1 Pages
-
30VX
1 Pages
-
25VX
1 Pages
-
20VX
1 Pages
-
Telescopic Crane NIK900T
3 Pages
-
Telescopic Crane CCH550T
4 Pages
-
Crawler Crane CCH2500EX
8 Pages
-
Crawler Crane CCH900EX
8 Pages
-
Crawler Crane CCH500EX
8 Pages
-
Crawler Crane CCH3000
12 Pages
-
Crawler Crane CCH1500-5
32 Pages
-
Crawler Crane CCH500-3II
12 Pages
-
Mini Excavator 35N3
1 Pages
-
Mini Excavator 28N3
1 Pages
-
Midi Excavator 80VX2
1 Pages
-
Midi Excavator 65VX2
1 Pages
-
Mini Excavator 45VXL
1 Pages
-
Mini Excavator 40VXL
1 Pages
-
Mini Excavator 15VX
1 Pages
-
Mini Excavator 9VX
1 Pages
-
Mini Excavators 20NX
4 Pages
-
Mini Excavators 15NX
4 Pages
-
Mini Excavator 9NX
4 Pages