CCH1400-6
40Pages

{{requestButtons}}

Catalog excerpts

CCH1400-6 - 1

FULLY HYDRAULIC CRAWLER CRANE IHI Construction Machinery Limited

Open the catalog to page 1
CCH1400-6 - 2

■ Two Types of CCH1400 Spec type *This catalogue is based on “Standard” spec. *High Line-pull spec sheet is available with several differences as above and others. ■ 63m STD Boom (Max.) + Aux. Jib Boom length

Open the catalog to page 2
CCH1400-6 - 3

■ 60m STD Boom + 31m Jib (Max.) ■ 81m Light Boom (Max.) Boom length Boom length

Open the catalog to page 3
CCH1400-6 - 4

■ 63m Light Boom (Min.) + Aux. Jib Boom length ■ wer Boom 54.4m + Jib 47m (Max. Boom Combination)

Open the catalog to page 4
CCH1400-6 - 5

Boom Combination ………………………………………………………………………………………………… Crane Boom and Jib Combination Standard Boom Combination ………………………………………………………………………………… Crane Jib Combination ………………………………………………………………………………………… Boom and Jib Combination …………………………………………………………………………………… Light Boom Combination ……………………………………………………………………………………… 9 Wire Rope ……………………………………………………………………………………………………… 9 Max. Lifting Capacity By Reeving ……………………………………………………………………………… 9 Standard Boom Rated Lifting Loads ……………………………………………………………… 10 Aux. Jib Rated Lifting Loads ………………………………………………………………………… 11 Light Boom Rated Lifting Loads...

Open the catalog to page 5
CCH1400-6 - 6

♦ STANDARD BOOM CRANE ♦ LIGHT BOOM CRANE ■ CCH1400 Main Specification ■ Crane Specification •* The value marked with “•*” will be changed according to the loads given.

Open the catalog to page 6
CCH1400-6 - 7

◆ STANDARD BOOM CRANE  ◆ LIGHT BOOM CRANE 81mLIGHT BOOM 78mLIGHT BOOM 75mLIGHT BOOM HEIGHT ABOVE GROUND(m)

Open the catalog to page 7
CCH1400-6 - 8

Crane Boom and Jib Combination ■Standard Boom Combination (Omark: Normal guide-roller position, ☆mark: Additional guide-roller position)

Open the catalog to page 8
CCH1400-6 - 9

♦ LIGHT BOOM CRANE ■Light Boom Combination (Omark: Normal guide-roller position, ☆mark: Additional guide-roller position) Light boom combination

Open the catalog to page 9
CCH1400-6 - 10

♦ STANDARD BOOM CRANE Standard Boom Rated Lifting Loads 7. WHEN THE JIB IS MOUNTED, THE RATED LOAD WITH THE MAIN HOOK IS OBTAINED BY SUBTRACTING THE VALUE AS SHOWN BELOW (INCLUDING THE MASS OF THE AUX. HOOK) FROM THE VALUES GIVEN IN THIS TABLE. 6. THE ACTUAL LIFTING LOAD IS OBTAINED BY SUBTRACTING THE MASS OF ALL LIFTING EQUIPMENT SUCH AS THE MAIN HOOK, AUX. HOOK, ETC. FROM THE VALUES GIVEN IN THIS TABLE. 140t Hook...2.4t 120t Hook...1.7t 80t Hook...1.4t 60t Hook...1.4t

Open the catalog to page 10
CCH1400-6 - 11

♦ STANDARD BOOM CRANE Aux. Jib Rated Lifting Loads 1. THE VALUES OF RATED LOAD GIVEN IN THIS TABLE ARE THE LOAD OF WITHIN 75% OF TIPPING LOAD AND WITH THE FORWARD STABILITY OF 1.15 OR HIGHER FOR FULL SWINGING OF 360 DEGREES ON A FIRM LEVEL GROUND. 2. THE WORKING RADIUS REFERS TO THE HORIZONTAL DISTANCE FROM THE CENTER OF SWINGING TO THE HOOK AXIS. 3. THE ACTUAL LIFTING LOAD IS OBTAINED BY SUBTRACTING THE MASS OF ALL LIFTING EQUIPMENT SUCH AS THE MAIN HOOK, AUX. HOOK, ETC. FROM THE VALUES GIVEN IN THIS TABLE.

Open the catalog to page 11
CCH1400-6 - 12

♦ LIGHT BOOM CRANE Light Boom Rated Lifting Loads Aux. Jib Rated Lifting Loads 1. THE VALUES OF RATED LOAD GIVEN IN THIS TABLE ARE THE LOAD OF WITHIN 75% OF TIPPING LOAD AND WITH THE FORWARD STABILITY OF 1.15 OR HIGHER FOR FULL SWINGING OF 360 DEGREES ON A FIRM LEVEL GROUND. 2. THE FIGURE ENCLOSED WITHIN BOLD LINES IN THIS TABLE ARE THE VALUES DETERMINED BASED ON THE STRENGTH OF THE BOOM,ETC. 3. THE WORKING RADIUS REFERS TO THE HORIZONTAL DISTANCE FROM THE CENTER OF SWINGING TO THE HOOK AXIS. 4. FOR THE OPERATION, BE SURE TO RAISE THE A-FRAME. 5. THE LENGTH OF THE BOOM WHICH CAN BE...

Open the catalog to page 12
CCH1400-6 - 13

♦ STANDARD BOOM CRANE Crane Jib Rated Lifting Loads ■ Boom length: 15.0m unit: ton ■ Boom length: 18.0m unit: ton 1. THE VALUES OF RATED LOAD GIVEN IN THIS TABLE ARE THE LOAD OF WITHIN 75% OF TIPPING LOAD AND WITH THE FORWARD STABILITY OF 1.15 OR HIGHER FOR FULL SWINGING OF 360 DEGREES ON A FIRM LEVEL GROUND. 2. THE WORKING RADIUS REFERS TO THE HORIZONTAL DISTANCE FROM THE CENTER OF SWINGING TO THE HOOK AXIS. 3. THE ACTUAL LIFTING LOAD IS OBTAINED BY SUBTRACTING THE MASS OF ALL LIFTING EQUIPMENT SUCH AS THE MAIN HOOK, AUX. HOOK, ETC. FROM THE VALUES GIVEN IN THIS TABLE.

Open the catalog to page 13
CCH1400-6 - 14

♦ STANDARD BOOM CRANE 61.0t Counterweight Crane Jib Rated Lifting Loads ■ Boom length: 27.0m unit:ton ■ Boom length: 30.0m unit: ton

Open the catalog to page 14

All IHI Construction Machinery limited catalogs and technical brochures

  1. CCH1000-6

    24 Pages

  2. 45V4-F

    6 Pages

  3. 55N4

    2 Pages

  4. 85V4

    2 Pages

  5. 9VX3- 17VX3

    2 Pages

  6. CCH3000

    32 Pages

  7. CCH1000

    24 Pages

  8. CCH700

    24 Pages

  9. CCH550-3II

    12 Pages

  10. CL series

    6 Pages

  11. 30NX2

    4 Pages

  12. 15NX

    4 Pages

  13. 35V4

    4 Pages

  14. 30V4

    4 Pages

  15. CL35, CL45

    6 Pages

  16. CCH1200EX

    8 Pages

  17. CCH700EX

    8 Pages

  18. CCH2800

    12 Pages

  19. CCH2500

    12 Pages

  20. CCH2000-5

    32 Pages

  21. CCH1200-5

    16 Pages

  22. CCH900

    8 Pages

  23. 55N3

    1 Pages

  24. 55VX

    1 Pages

  25. 50VX

    1 Pages

  26. 35VX

    1 Pages

  27. 30VX

    1 Pages

  28. 25VX

    1 Pages

  29. 20VX

    1 Pages