CCH1000-6
24Pages

Add to favorites

Catalog excerpts

FULLY HYDRAULIC CRAWLER CRANE IHI Construction Machinery Limited

Open the catalog to page 1

LUFFING TOWER CRANE CLAMSHELL SPECIFICATION

Open the catalog to page 2

ICrane Specifications ICCHIOOO Main Specifications PERFORMANCE ^The value marked with will be changed according to the loads given

Open the catalog to page 3

;&The above chart is our recommendation for main boom combination. Please choose the boom length based on it to meet your requirement.

Open the catalog to page 4

JIB RATED LIFTING LOADS■ 49~52m boom (unit. ton) Boom length (m) 7. Depending on the number of part lines, the rated lifting load is limited as follows. Notice: The rated load shown in bold lines are based on structural strength factors.

Open the catalog to page 7

Dimensions/Specifications ■Crane Specifications ■CCH1000 Main Specifications PERFORMANCE j&The value marked with "W will be changed according to the loads given

Open the catalog to page 9

LUFFING TOWER CRANETower Boom And Jib Combination , ■Tower Boom And Jib Combination

Open the catalog to page 10

. TOWER CRANE RATED LIFTING LOADS .■ 26.5m tower boom (unit. ton)■ 29.5m tower boom Boom Length (m) ■ 32.5m tower boom Boom Length (nt) 1. All rated loads are based on the machine being operated on a firm, level, uniformly supporting surface ground, at any point of 360° around the machine within 78% of tipping load and forward stability factor over 1.15. 2. The determine actual lifting loads, the weight of all lifting device such as hook must be reduced from the lifting loads. 15t hook...0.80t 12.Ot hook...0.40t 3. Depending on the number of part lines, rated lifting loads are limited as...

Open the catalog to page 11

. TOWER CRANE RATED LIFTING LOADS .■ 41.5m tower boom Boom Length (m)

Open the catalog to page 13

Working Ranges Diagram

Open the catalog to page 14

Dimensions/Specifications ■Clamshell Specifications ■CCH1000 Main Specifications PERFORMANCE SSSThe value marked with "S8S" will be changed according to the loads given

Open the catalog to page 15

■Clamshell Bucket Specifications 1. The maximum boom length is 25 meters. 2. The rated lifting load indicates the maximum lifting weight of a bucket and its content. Select an appropriate bucket depending on content, so as not to exceed the rated lifting load. 3. The working radius refers to the horizontal distance from the center of swinging to the vertical line through the center of the bucket. 4. Maximum dumping height depends on the height of a bucket attached. In the chart, top clearance of 6 meters is assumed. 5. Maximum digging depth is the value calculated by subtracting maximum...

Open the catalog to page 16

■Safety Devices • Moment Limiter :Over-load prevention device. Alarm at 90%,automatic stop at 100% • Hook over-winding :Alarm and automatic stopper • Boom over-hoisting :Automatic stopper • Boom 2nd over-hoisting :AII winch function(non resetable) • Boom backstopper :Double-stem telescopic • Swing lock :Pin-lock type • Main and Auxiliary drum lock :Pawl type • Boom hoisting drum lock :Pawl type • Lever lock :Remote control circuit line cut off • Automatic brake system • Slewing warning buzzer(with voice alarm) • Travel warning buzzer(with voice alarm) • Engine start voice alarm • Switch of...

Open the catalog to page 17

13050 1st Disassembly Base Machine with: Main/Aux. Boom Hoist Drum Main Boom Hoist Wire A-frame Inner Boom 2nd Disassembly Base Machine with: Main/Aux. Boom Hoist Drum Main Boom Hoist Wire A-frame 3rd Disassembly Base Machine Only Main/Aux. Boom Hoist Drum Main Boom Hoist Wire

Open the catalog to page 18

Counterweight Ass'y (4 stage piling) 855 Crawler Ass'y A-frame Pedestal (Jackup) H780xW1440xL4640 Excluding Hoist Cylinder 8i Boom Hoisting Wire H210xW400xL400

Open the catalog to page 19

Transport Dimensions and Weights Finish painting will be in IHI standard painting color unless otherwise stated in the contract. [Green] : Munsell NO.10G6.5/8 [Gray] : Munsell No.N-3.0 (1) Should there be any difference between the descriptions in the Specifications Sheet and in the Catalogues, the description in the Specification Sheet shall supersede. (2) Specifications are subject to change without notice due to improvement or modifications.

Open the catalog to page 23

T TT T IHI Construction Machinery Limited 3174 Showa-machi, Kanazawa-ku, Yokohama, Kanagawa 236-8611 Japan A A A A Phone: +81(45)276-1252 Fax: 81(45)276-2583 Specifications are subject to change without notice due to technical improvements or modifications Distributed by

Open the catalog to page 24

CCH1000-6 24Pages

Catalog excerpts

All IHI Construction Machinery limited catalogs and technical brochures

CCH1000-6
24Pages