iGWlite
4Pages

iGWlite Compact protocol conversion was never this simple. Highlights • Secured, adaptable and modular communication gateways specifically designed for electrical facilities • From meter data concentration to protocol conversion – full range of protocols (DNP3.0, IEC 61850 (MMS & GOOSE), DLMS, Modbus, IEC 60870-5-101/102/103/104 etc.) to communicate with all devices and control centers involved in any kind of substation or generation plant • 1 Ethernet & 1 RS485/RS422 port and an optional RS232 port (copper or fiber) or 2G/3G/4G modem. Overview Providing the same protocol conversion and automation capabilities (incl. IEC 61850), only with fewer communication ports, the iGWlite is the compact version of the iGW. Therfore, it is particularly useful to set up, automize and retrofit generation plants, substations and other control networks requiring data concentration or conversion between several protocols, e.g. Modbus to Ethernet or IEC 61850 to DNP3. The data collection from meters, protection relays, and other IEDs can be performed using any protocol, inlcuding IEC 60870-5, IEC 61850 (MMS/GOOSE), DNP3, DLMS, Modbus or Procome, whilst managing a microseconds timestamp resolution via NTP or PTP. Further, the iGWlite can also process and transfer the data to one or multiple control centers and SCADA master stations using upstream protocols such as IEC 104, IEC 101, TASE2.0/ ICCP (IEC 60870-6), IEC 61850-90-2, DNP3, and Modbus RTU/TCP. A network architecture supported by an iGWlite is open, simple and scalable, allowing to integrate coming generations of devices (IEDs, sensors, routers etc.) and adapt to any kind of changes made to your power distribution network, saving you time, money and space on your DIN-

The iGWlite can be used as a simple link between serially connected physical devices and logical IEC 61850 devices as it can be simply configured to map any signal from all sorts of data models onto IEC 61850 logical nodes, whilst also providing IEEE1588 / PTP time synchronization. The iGW is equipped with transparent TCP bridging and configurable IP routing to tunnel any serial protocol (such as Modbus) over a TCP/IP connection and facilitate the data transfer through complex IP networks. Thanks to its full iGrid protocol stack, the iGWlite can convert any standard or legacy protocol such...

The M series combines the B#01 ethernet and serial ports with one of the following modems: M01 (GPRS), M11 (3G + GPRS) and M21 (4G/LTE + GPRS) iGW Series – the bigger brother iRTUe – Remote I/O Expansions The iGW B, M & S series have the same protocol stack and come with (4) configurable serial ports + (2) Ethernet ports to connect multiple IEDs or iRTUe. The iGW S Series provides up to (4) Ethernet ports (optional fiber optics) via an internal ethernet switch with HSR/ PRP redundancy. The iGWlite can be freely extended with I/Os by connecting several iRTUe. Smart Solutions for Smart Grids...

General Characteristics Protocol Stack Master/Slave Modbus TCP/UDP and JBUS (master) Master/Slave ModbusRTU Master DLMS Environmental Operating temperature : -25ºC to +70ºC IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-38 Master Spabus, Mlink, Procome Vibration & shock test IEC 60068-2-6, IEC 60068-2-7 SNMP Agent/Manager Physical DIN Rail mounting IEC 61850 GOOSE Publisher/Subscriber EMC Standards RTC & Time Synchronization Real-time Clock (RTC) with 1.5 ppm drift and microsecond resolution timestamp Server NTP, IEC 60870-5-101, IEC 60870-5-104,...