Infrared temperature sensor with IO-Link and LED pilot light

Product catalog summary

Overview: The document provides technical specifications and features of infrared temperature sensors with IO-Link and LED pilot light, designed for non-contact temperature measurement in industries such as steel, plastics, and glass.

Specifications:

Temperature sensors offer IO-Link, analogue output (4...20 mA), and switching output, which are freely programmable.
Adjustable for different target materials with scratch-resistant precision lenses to minimize sensitivity to ambient light.
Operating voltage ranges from 18 to 32 V DC with short-circuit and reverse polarity protection.
Common technical data includes M12 socket options, current consumption ≤ 50 mA, ambient temperature range 0...65°C, and protection rating of IP 65.

Features:

Integrated LED pilot light for alignment and control, visible even on glowing surfaces, with low current consumption and long lifetime.
Simulation function can be activated on the sensor or via external control signal.
Batch-related programming through IO-Link interface allows dynamic parameter adjustments from the control room.

Models and Measurement Ranges:

TW2000IR: Measuring range 0…1000°C, wavelength range 8...14 μm, response time < 100 ms.
IR temperature sensor: Measuring range 250...1600°C, wavelength range 1.0...1.7 μm, measurement uncertainty 0.5% of measured value, min. 4 K.
TW2001: Measuring range 500...2500°C, wavelength range 0.78...1.06 μm, measurement uncertainty 0.3% of measured value, min. 4 K.

Accessories:

Air purge, cooling jacket, mounting bracket, protective tube, and heat insulation available for enhanced sensor performance.
USB IO-Link master and LR DEVICE software for parameter setting and analysis.

Additional Information: For further technical details, visit the manufacturer's website.

Catalog excerpts

Infrared temperature sensor with IO-Link and LED pilot light-1

Process sensors Infrared temperature sensor with IO-Link and LED pilot light Temperature sensors IO-Link, analogue output 4...20 mA and switching output, freely programmable Adjustable for different target materials Scratch-resistant precision lenses for minimum sensitivity to ambient light LED pilot light for alignment and control Simulation function: activated on the sensor or by external control signal Non-contact temperature measurement For the precise temperature measurement of particularly hot objects or objects which are difficult to access, e.g. in the steel, plastics or glass industries. The measured value is provided via the analogue output. In addition, a switching output and an IO-Link interface are provided. Integrated LED pilot light The pilot light shows the user the exact position and size of the measuring segment. The green light is visible very well even on glowing surfaces. Besides a low current consumption, the LED is distinguished by a virtually unlimited lifetime. Batch-related programming Thanks to the integrated IO-Link communication interface, the parameters can be dynamically adjusted to the application from the control room. Local parameter setting on the unit is not necessary, but can optionally be done via the buttons and the display.

Open the catalog to page 1

Infrared temperature sensor with IO-Link and LED pilot light-2

Wave length range [pm] Response time M30, 1 x analogue, 1 x switching output, NO / NC programmable 1 % of the measured IR temperature sensor 0...1000 8...14 value at least 2K - < 100 TW2000 Common technical data 1) measuring segment diameter 2) measuring distance 3) diameter LED pilot light c(ose to you! For further technical details please visit: www.ifm.com

Open the catalog to page 2