Brochure Level Sensors
1 / 36Pages

The right choice for your application. Level sensors from ifm. Automation solutions from ifm.

Systems for level monitoring. The optimum solution for every requirement. point level detection Impedance spectroscopy in contact with the medium Alternative to the turning fork, suppresses deposits and foam Capacitive in contact with the medium For overflow prevention and leakage monitoring Capacitive without contact For the detection through non-metallic tank walls Capacitive in contact with the medium For applications on hydraulic and coolant tanks conttnuous level measurement Contactless radar For non-contact level measurement in tanks up to 10m Guided wave radar in contact with the...

Analogue output Switching output EHEDG, 3A, FDA, EC1935, WHG, ATEX, DNV/GL, FCM EHEDG, 3A, FDA, EC1935, ATEX, DNV/GL, FCM Sensor type

Impedance spectroscopy. The alternative to tuning forks. Suppression of residues and foam. Reliable detection: Suppression of residues, splashing water or foam. Better than a tuning fork: No mechanical components, fully compatible regarding installation and function. Immediately ready for use: Factory settings for the most common media. Adaptable using IO-Link: Adaptation to and differentiation of media configurable. More transparency: Read process values to optimise the application. Hygienic design: High-grade stainless steel housing with PEEK sensor tip. Versions for industrial and...

Manhole monitoring Full monitoring LMC type with a thread at the back. Empty monitoring Run-dry protection LMT level sensors Flexible mounting thanks to orientation-independent installation. Process connection Preset to aqueous media Shock and vibration resistant in a robust stainless steel housing. Hygienic approvals EHEDG, 3A and FDA. Versions available as overflow prevention. Complementary switching outputs. Preset to oils, fats, powder LMT110 Preset to sugary media G 1/2

Capacitive. For overflow prevention and leakage monitoring. Ready in no time: Easy mounting adjustment. Flexible: Normally closed / normally open programmable. Clear: Clearly visible indication of the switch points. Variable use: Insertion depths of 132 to 737 mm. Certified: Approval as overflow protection or leakage sensor to the German Federal Water Act. LI type point level sensor Probe length Optimised for use in hydraulic oils and coolants. Modular mounting concept for flexible use. It only takes one push of a button to adjust and set the output function. 2 switching outputs, 1 x...

1 switching output, normally closed Overflow prevention to WHG 132 ifm w in the Order no shop? web ifm.com

Capacitive. For detection through non-metallic tank walls. User-friendly: Many functions such as binary switching output, timer functions as output, damping function as well as normally closed / normally open and window function. Communicative: Process values, parameter setting data and diagnostic information can be transferred and evaluated via IO-Link. Simple: Parameter setting via IO-Link before installation, as an alternative also via pushbuttons on the sensor. Repeatable: Simple parameter setting of many sensors via "copy & paste" in the LR DEVICE software or via a memory plug....

Easy empty and full teach on bypasses Are suited for bypass installation for easy empty and full teach without value fluctuations or interruption of the process. Installation with and without contact with the medium Detection of bulk material and liquids. Can operate in and outside the medium. Are suited, in contrast to other measuring principles, for liquids and bulk material. Trouble-free use. Look through non-metallic walls. Suppress deposits. Versions for potentially explosive atmospheres (ATEX). KQ type point level sensor Sensing range Capacitive sensors in small rectangular plastic...

Capacitive. For continuous detection through non-metallic tank walls. Permanently in view: Continuous range monitoring of levels. Easy installation: "See" through non-conductive tank walls without contact and maintenance. Three switch points in one: Reduce the number of sensors – monitor three point levels with only one sensor. Quick set up: Configure switch points easily via IO-Link. No incorrect switching: For reliable switching. Build-up and tank walls can be suppressed by means of offset. IO-Link master For conditionbased maintenance: Continuous display of the level via IO-Link of 0 -...

Determine the point level via bypass With conductive tank walls, the sensor is installed on a non-conductive bypass pipe. To ensure reliable level detection in a thin bypass pipe, liquids can be detected as from a pipe diameter of 10 mm by means of the pipe adapter. KQ10 type point level sensors Process values of 0...100 % can continuously be transferred via IO-Link in ranges of 250 mm without dead band. Setting of switch points and other functions, such as normally closed/ normally open, hysteresis, or the orientation and the sensing face of the sensor via IO-Link. DC · 3 switching...

Capacitive. For applications on hydraulic and coolant tanks. Professional: For industrial applications in water-based or oil-based media. Variety: Versions with 2 or 4 switching outputs or analogue output 4...20 mA / 0...10 V) Safe: Type LK12 with approval as overflow protection. Combined: Type LT for level and temperature monitoring. Flexible: Variable insertion depths thanks to clamp fitting. LK level sensors Display and handling directly on the unit or via IO-Link. As an option with analogue output or up to four switching outputs. Suitable for oil temperatures up to 70 °C. Versions...

LT type level sensors Display and handling directly on the unit or via IO-Link. Probe length 4 switching outputs for level and temperature 264 Suitable for waterbased or oil-based media. 2 switching outputs for level 2 switching outputs for temperature 1 analogue output, 1 switching output 1 analogue output for level1) 1 switching output for temperature1) / temperature selectable

Contactless radar. For non-contact level measurement in tanks up to 10m. Simple: Quick set-up, only one parameter required. Hygienic design Robust high-grade stainless steel housing and approvals tailored to hygienic requirements. For CIP/SIP applications. IO-Link: Remote maintenance, an advantage especially for high tanks. Precise: Accurate and continuous level measurement for liquids in the food sector. LW27 type hygienic level sensor Measuring range 0.01…10m Medium temperature -40...150 °C Process connection 2 switching outputs or 1 switching output and 1 analogue output 4...20 mA...