Wheel Gauging System R2010

Wheel Gauging Machine R2010 Car and Commercial Vehicles The patented wheel gauging machine R2010 was developed for measuring geometrical characteristics of motor vehicle wheels. It combines the functions measuring data collection, measuring process as well as calculation and displaying the measured characteristics in one system. The wheel gauging machine R2010 for 100% inspection is a fully automatic system for the integration in production lines. Mechanics, electrics and software are designed modularly and will be configured individually according to customer‘s specifications. The single components...

International Standards Geometrical Characteristics at the Bead Seat Area EUWA (Association of European Wheel Manufacturers) For historical reasons, some geometrical characteristics (dimensions) are not physically present (for example: the bead seat/rim flange edge). This makes it difficult to record these dimensions with repeat accuracy while using standard gauging equipment. The EUWA requires their members to fulfill the requirements by the automobile industry, to receive the requirements of the quality standards of ISO9001. E.T.R.T.O. (European Tyre and Rim Technical Organisation) The activities...

Revolving axis & clamping unit Roller conveyor input Measuring tower & measuring heads Roller conveyor output Base frame Base assembly The Wheel Gauging System R2010 is patented. It is build up, in the base version, with the following assemblies: 6 Wheel Gauging System R2010 Inline assembly Inline system with roller conveyors and Wheel Gauging System R2010 7

100%-Inline-Wheel Gauging System R2010 Wheel Gauging System for the production site Our customers Wheel manufacturer (Maxion, Accuride, Magnetto, BBS, Brock, Jingu, …..) Service provider (Eurofit, Truck & Wheels, Reifen Gundlach, Schedl, Fengshen, …..) Machine manufacturer (Hofmann, Schenck, Seeb, .….) Laboratory-Wheel Gauging System R2010 Wheel Gauging System for the laboratory site Our customers Wheel maunfacturer (Maxion, Accuride, Magnetto, Baosteel, Jingu, Cromodora, …..) Automobile manufacturer (Daimler, Niss

Overview of the main assemblies of an inline system Display of the measured values in the wheel graph after each measurement

Display of the measured values in a table after each measurement Example 1: No.: 8 Caracteristic: Dia O = rim diameter outside Nominal value = 378.870mm LT (lower tolerance) = -0.300 UT (upper tolerance) = 0.400mm Value (measured value) = 378.949mm Example 2: No.: 173 Caracteristic: VA (MP) = match point (1. Harmonic of runout outside and inside) U = unilateral = LT not specified Nominal value = 0.000mm LT (lower tolerance) = * (not specified) UT (upper tolerance) = 0.300mm Value (measured value) = 0.080mm Phase (angle match point) = 179° Explanation of match point calcualtion Display of the...

Innovations from the Black Forest Wheel dimensions Our service technicians ensure quick and competent support, in all product ranges and around the clock. Furthermore IEF-Werner offers product-, application- and customer-specific in-house trainings. Of course, if desired as well at the customer‘s site. Wheel diameter Center hole diameter 52 to 88 (flexible clamping) 52 mm up to 161 mm (clamping rings - chucks) Wheel weight Commissionings Retrofitting, modifications and updates Reparations and spare parts Individual maintenance agreements Fault analysis and production optimisation Trainings Center...

Your contact: Giuseppe Morreale Product Management Furtwangen IEF-Werner GmbH | Wendelhofstr. 6 | 78120 Furtwangen | Telefon +49 7723/925-0 | [email protected] | www.ief