WM44-EVO_EN
2Pages

Wind Sensors and Wind Vanes Pulses output anemometers Wireless (wind sensor and emitter included) electronics Electronics at the service of industry 0103010804 ANEMO4403 V3 PULSES OUTPUT 2,5m CABLE 0103010806 ANEMO4403 V3 PULSES OUTPUT 4-20mA Analog output anemometers Wind Vanes Heated versions, view datasheet: - ANEMO5H25 V3 PULSES OUTPUT - ANEMO5H25 V3 4-20mA OUTPUT - WV5H25 4-20mA OUTPUT References with external antenna connector (antenna included in reference) *For other references, please contact us. The units with an external connector have been designed for those situations where the display has been installed in a place with a poor RF communication signal. If the display must be installed in a metal box or similar, it will be necessary to use a unit with external antenna. The reference with antenna connector have the antenna included with 3-meter cable and magnet fixation. WM44-EVO11V3 WM44 V3 range of IED Electronics. Wind speed and direction display for outdoors. IP65. Q° Ledelectronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com info@iedelectronics.com WM44 V3 is a wind speed and direction display for outdoors with 2 alarm relays. Possibility of connecting wind sensors with a frequency or a 4-20 mA analogue output. It has a power output for sensors. For outdoor/indoor installation (IP65) Backlighted Graphic Liquid Crystal Display Adjustable wind speed alarms 4-20mA analogue output All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

P00 (1)Exit program mode without saving data, (2) Exit program mode saving data, (3) Exit program mode saving data as “preset user configuration”, (4), Exit program saving “preset user configuration” data by pressing ’’ENTER” for more than 10sec. P01 Wind sensor selection. (0) Only anemometer, (1) Only wind vane, (2) Anemometer + wind vane. [0] P02 Anemometer input selection. Only for P01 = 0 and P01 = 2. (0) Pulse input, (1) 4-20mA Input (2) RF Anemo4403. [0] Electrical features Alarms The alarm is triggered when the wind speed reaches or exceeds the programmed value. It includes a delay,...