Anemo4403_v3_relay_alarm_EN
2Pages

REFERENCES AND ACCESORIES Electrical features ANEMO4403 V3 RELAY-ALARM References Power Supply 24 Vac/Vdc Maximum power consumption <1 VA/W Output type Relay contact Accesories Electrical features ANEMO4403 V3 CONFIGURABLE RELAY-ALARM Power supply 12...24 Vdc Maximum power consumption <1 W Output type Relay contact 0103010505 Stainlees steel bracket AISI 304 01030105061 Stainless steel bracket plus hardware for mounting the wind sensor on the backet 01030105071 Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg 0103010508 2 steel clamps kit that can be fixed to irregular 110 unit minimum order. On sale exclusively with wind sensor. *For other references, please, contact us. General Material Bearings Connection type Weight (with 20m cable) Weight (without cable) Dimensions Storage temperature Working temperature with no ice EMC electronics Electronics at the service of industry EN 61000-6-2:2001 EN 55022:2001, Class B IP65 (UNE 20324:1993) IP54 (UNE 20324:1993) Configurable version ANEMO4403 V3 RELAY-ALARM ANEMO V3 range of IED Electronics. Wind speed sensor designed for different industries and sectors. Q^Led electronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com info@iedelectronics.com ANEMO4403 V3 RELAY-ALARM is a wind speed sensor equipped with a relay output that is activated when the wind reaches a preconfigured speed. Industrial design for extrem environments Relay output Stainless Steel bearings Measurement range up to 180 km/h All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

ANEMO4403 V3 RELAY-ALARM has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations, greenhouses, irrigation systems... The wind sensor must be fixed on a vertical position. OPERATING Up to 180 km/h of wind speed. Output activation: After a second*2 of wind speed over the set value. Output deactivation: Wind speed 1km/h*3 below the set value. Minimum duration of the output pulse: 5 seconds. The output is not latched.*4 Up to 180 km/h of wind speed. Output activation: After 30 seconds*3 above 20 km/h*2. Output clamping: 1h*4 period after...