WM44-EVO11 V3

Product catalog summary

Overview: The WM44 V3 is a wind speed and direction display designed for outdoor use, featuring two alarm relays and compatibility with wind sensors that have either a frequency or a 4-20 mA analogue output. It is suitable for both outdoor and indoor installations with an IP65 rating and includes a backlit graphic liquid crystal display.

Specifications: The device supports adjustable wind speed alarms and provides a 4-20mA analogue output. It is available in different models with power supply options of 24Vdc or 230Vac. The device also offers wireless connectivity options with included wind sensors and RF modules.

References and Accessories: Various sets and configurations are available, including models with external antenna connectors for improved RF communication in challenging environments. The document lists specific references for different configurations and accessories, including anemometers and wind vanes with pulse or 4-20mA outputs.

Alarms: The WM44 V3 features configurable alarms that trigger based on wind speed thresholds. The alarms can be set with delays to prevent false triggers from gusts. ALARM2 deactivates ALARM1 when triggered, and the display blinks to indicate danger. Alarm configurations include trigger values, polarity, and modes (intermittent or continuous).

Programming and User Settings: The device allows for user-defined settings that can be saved and retrieved. It records minimum and maximum wind speed values, which can be reset. Programming mode is accessed via specific button combinations, allowing for detailed configuration of sensor inputs, alarm settings, and output configurations.

Technical Specifications: The WM44 V3 operates on a power supply of 230 Vac, 50-60 Hz, with a power consumption of less than 3.5 VA. It supports frequency, analogue (4-20mA), or RF input signals, with RF connectivity compliant with IEEE 802.15.4. The device includes a backlit LCD display and supports wind speed units in km/h, mph, and m/s. It is housed in a polycarbonate enclosure, weighs 250g, and operates within a temperature range of -20 ºC to +70 ºC.

Connection and Dimensions: The device requires opening the enclosure for connections, with internal terminal blocks providing necessary indications. It includes connectors for output relays, analogue output, and wind sensors. The document provides detailed dimensions for installation purposes.

Catalog excerpts

Wind Sensors and Wind Vanes Pulses output anemometers Wireless (wind sensor and emitter included) electronics Electronics at the service of industry 0103010804 ANEMO4403 V3 PULSES OUTPUT 2,5m CABLE 0103010806 ANEMO4403 V3 PULSES OUTPUT 4-20mA Analog output anemometers Wind Vanes Heated versions, view datasheet: - ANEMO5H25 V3 PULSES OUTPUT - ANEMO5H25 V3 4-20mA OUTPUT - WV5H25 4-20mA OUTPUT References with external antenna connector (antenna included in reference) *For other references, please contact us. The units with an external connector have been designed for those situations where the display has been installed in a place with a poor RF communication signal. If the display must be installed in a metal box or similar, it will be necessary to use a unit with external antenna. The reference with antenna connector have the antenna included with 3-meter cable and magnet fixation. WM44-EVO11V3 WM44 V3 range of IED Electronics. Wind speed and direction display for outdoors. IP65. Q° Ledelectronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] WM44 V3 is a wind speed and direction display for outdoors with 2 alarm relays. Possibility of connecting wind sensors with a frequency or a 4-20 mA analogue output. It has a power output for sensors. For outdoor/indoor installation (IP65) Backlighted Graphic Liquid Crystal Display Adjustable wind speed alarms 4-20mA analogue output All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

Open the catalog to page 1

P00 (1)Exit program mode without saving data, (2) Exit program mode saving data, (3) Exit program mode saving data as “preset user configuration”, (4), Exit program saving “preset user configuration” data by pressing ’’ENTER” for more than 10sec. P01 Wind sensor selection. (0) Only anemometer, (1) Only wind vane, (2) Anemometer + wind vane. [0] P02 Anemometer input selection. Only for P01 = 0 and P01 = 2. (0) Pulse input, (1) 4-20mA Input (2) RF Anemo4403. [0] Electrical features Alarms The alarm is triggered when the wind speed reaches or exceeds the programmed value. It includes a delay, configurable...

Open the catalog to page 2

WM44-EVO11 V3

WM44-EVO11 V3

Catalog excerpts

All IED COMPANY catalogs and technical brochures