WM44-EVO_EN

Product catalog summary

Overview: The WM44 V3 is a wind speed and direction display designed for outdoor use, featuring two alarm relays and compatibility with wind sensors that have either a frequency or a 4-20 mA analogue output. It is suitable for both outdoor and indoor installations with an IP65 rating and includes a backlit graphic LCD.

Specifications:

Power Supply: Available in 24Vdc and 230Vac versions.
Display: Backlit liquid crystal display with 128x64 pixels.
Inputs: Frequency, analogue (4-20mA), or RF.
Outputs: 15 Vdc power output for sensors, 4-20 mA analogue output with a maximum impedance of 500 Ohm.
Alarm Relays: 250 Vac, 8A capacity.
Enclosure: Made of polycarbonate, weighing 250g, with IP65 protection.
Temperature Range: Storage from -35 ºC to +70 ºC, operational from -20 ºC to +70 ºC.
EMC Compliance: EN 61000-6-2:2001, EN 55022:2001, Class B.

Features:

Adjustable wind speed alarms with configurable delays to prevent false triggers from gusts.
Automatic recording of minimum and maximum wind speed values.
Programmable settings for wind sensor selection, input type, and measurement units (km/h, mph, m/s).
Alarm configuration includes trigger values, modes (continuous or intermittent), and latching options.

Programming and Configuration:

Program mode allows for saving user default settings and resetting to factory configurations.
Button functions include UP, DOWN, ENTER, and ESC for navigating and setting program steps.
Specific program steps (P00-P28) cover various configurations such as sensor selection, alarm settings, and analogue output configurations.

References and Accessories:

Various models and sets available, including wireless options with RF modules and external antenna connectors for improved signal reception.
Compatible with ANEMO4403 V3 anemometers and WV4403 wind vanes, available in pulse output and 4-20mA analogue output versions.

Connection and Installation:

Connections require opening the device enclosure, with internal terminal blocks providing necessary indications.
Specific connectors for output relays, analogue output, and wind sensors are detailed.

Catalog excerpts

Wind Sensors and Wind Vanes Pulses output anemometers Wireless (wind sensor and emitter included) electronics Electronics at the service of industry 0103010804 ANEMO4403 V3 PULSES OUTPUT 2,5m CABLE 0103010806 ANEMO4403 V3 PULSES OUTPUT 4-20mA Analog output anemometers Wind Vanes Heated versions, view datasheet: - ANEMO5H25 V3 PULSES OUTPUT - ANEMO5H25 V3 4-20mA OUTPUT - WV5H25 4-20mA OUTPUT References with external antenna connector (antenna included in reference) *For other references, please contact us. The units with an external connector have been designed for those situations where the display has been installed in a place with a poor RF communication signal. If the display must be installed in a metal box or similar, it will be necessary to use a unit with external antenna. The reference with antenna connector have the antenna included with 3-meter cable and magnet fixation. WM44-EVO11V3 WM44 V3 range of IED Electronics. Wind speed and direction display for outdoors. IP65. Q° Ledelectronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] WM44 V3 is a wind speed and direction display for outdoors with 2 alarm relays. Possibility of connecting wind sensors with a frequency or a 4-20 mA analogue output. It has a power output for sensors. For outdoor/indoor installation (IP65) Backlighted Graphic Liquid Crystal Display Adjustable wind speed alarms 4-20mA analogue output All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

Open the catalog to page 1

P00 (1)Exit program mode without saving data, (2) Exit program mode saving data, (3) Exit program mode saving data as “preset user configuration”, (4), Exit program saving “preset user configuration” data by pressing ’’ENTER” for more than 10sec. P01 Wind sensor selection. (0) Only anemometer, (1) Only wind vane, (2) Anemometer + wind vane. [0] P02 Anemometer input selection. Only for P01 = 0 and P01 = 2. (0) Pulse input, (1) 4-20mA Input (2) RF Anemo4403. [0] Electrical features Alarms The alarm is triggered when the wind speed reaches or exceeds the programmed value. It includes a delay, configurable...

Open the catalog to page 2

WM44-EVO_EN

WM44-EVO_EN

Catalog excerpts

All IED COMPANY catalogs and technical brochures