VT

VT

VT

Product catalog summary
Introduction
The document describes a single quadrant DC drive, controlled by a 47kΩ potentiometer. The output voltage is modulated from 0-100% using pulse-width modulation (PWM). It features a control card and a power MOS-FET for efficient power management, making it suitable for industrial applications requiring precise current control.

Specifications
- Available in 6A, 12A, and 20A versions.
- Utilizes MOSFET output and PWM for voltage regulation.
- Includes short-circuit protection and an inhibit contact.
- Designed for use with a 47KΩ potentiometer.
- Does not incorporate feedback.

Applications
The VT drive can be used with DC motors, electromagnets, electro-valves, resistances, lamps, or any AC load requiring power control.

Working
The device is powered by 12 Vac/dc without polarity, with specific terminals for different models. The potentiometer is connected to designated terminals, and the output voltage is adjusted via PWM. The device includes short-circuit protection adjustable with an internal potentiometer and can be inhibited via a contact between specific terminals.

Technical Specifications
  • VT-6: Nominal output current of 6A, peak of 12A, factory adjustment between 8-9A, power input voltage between 12-24 Vac, dimensions 95x50x80 mm.
  • VT-12: Nominal output current of 12A, peak of 18A, factory adjustment between 12-14A, power input voltage between 12-24 Vdc, dimensions 140x60x80 mm.
  • VT-30: Nominal output current of 20A, peak of 26A, factory adjustment of 20A, power input voltage between 12-24 Vdc, dimensions 180x50x110 mm.


Manufacturer Information
Manufactured by Commercial and Technical Service, located in Aizoain, Navarra, Spain. Contact details include phone, fax, and email, with a website for more information. The document notes that IED reserves the right to modify products without notice.
See more

Catalog excerpts

VT-1

Direct current Inverter VT-30 • Single quadrant DC drive • 6, 12 and 20A versions • MOSFET output • Pulse width modulation PWM • Limitation adjustment of Imax or • Short-circuit protected • Inhibit contact • Control by 47KΩ potentiometer • Solid. Designed for industrial applications. • It does not incorporate feedback. INTRODUCTION Single quadrant DC drive. Regulation is controlled by a 47kΩ potentiometer with the equipment. Output voltage varies 0-100% by the pulse-width modulation PWM. The equipment integrates a control card and a power MOS-FET technique supply for power charge. The transitor is highly efficient which makes the equipment ideal for industrial applications where the current supplied to the charge must be controlled with accuracy. APPLICATIONS The VT can be employed in any DC motor, for of electro-magnets supply, electro-valves, resistances, lamps or any AC charge in which power control is required. WORKING The equipment is supplied with 12 Vac/dc without polarity by the terminals 9-10 or 13-14 according to model. In the terminals 7-8 or 11-12 according to model charge wished to supply is connected taking into account that terminals 7 and 11 correspond to negative in the output voltage. Potentiometer of regulation is connected in the terminals 1-2-3 and the wire shield (the wire has to be shielded if the distance is up to 30 cm) in the terminal 4. Turning the potentiometer, output voltage varies by PWM with a high precision in the average value applied to the charge. This output incorporates a short-circuit protection adjustable with an inner potentiometer. The equipment has the possibility of inhibiting its working by a contact between bornes 5-6. Output voltage of the equipment. Average value of the voltaje applied to the charge TECHNICAL SPECIFICATIONS Nominal output current Maximum output peak Maximum output current (factory adjustment) Power input voltage between 12-24 Vac between 12-24 Vdc between 12-24 Vdc Fuse incorporated DC Supply Without polarity

 Open the catalog to page 1
VT-2

P^led O7electronics Pol. PLAZAOLA Manzana E Nave 6 31195 AIZOAIN (NAVARRA - SPAIN) Tfno. 948 351 399 Fax 948 351 401 e-mail [email protected]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.