SAG-105H 12VDC - INFLATABLES VERSION

Product catalog summary

Specifications:
The SAG-105H wind speed sensor is designed for inflatables, adhering to UNE-EN 14960:2014 standards. It measures wind speeds up to 180 km/h and operates with a 12 Vdc power supply. The device includes stainless steel bearings and a sound and light alarm system.

Electrical Characteristics:
Power supply is 12 Vdc with a maximum current of 0.5 A. The output is frequency-based (pulses), with an optional relay output of 250 Vac / 3A.

Measurements:
The sensor has a range of 3-180 km/h, a starting speed of 8 km/h, and a survival speed of 200 km/h. It features a sound power level of 115 dB and luminous intensities of >100 cd for the yellow beacon and >80 cd for the red beacon.

General Features:
The device is compact, integrating a wind sensor, electronics, and a beacon. It includes a 10 m cable for connection and operates in temperatures from -20ºC to +60ºC. It is protected under IP55 and IK08 standards.

Operation:
The device has configurable alarm settings, with pre-alarm and alarm activations at various wind speeds. The default configuration activates pre-alarm at 20 km/h and alarm at 37 km/h. The alarm system can be adjusted using switches.

Installation and Options:
The device includes clamps and magnets for fixation. It can be integrated with remote controls and has options for relay output and wind tunnel calibration certificates.

Catalog excerpts

TECHNICAL SPECIFICATIONS Caracterfsticas electricas References Alimentacion 12 Vdc (50 mA without activated beacons) Type of output Frequency (pulses) Output features See annex Relay output (optional) 250 Vac / 3A *For other references, please contact us. General Features Bearings Stainless steel X65Cr13 Type of connection 10 m cable (3x1,5mm2) Sound power level 115 dB Yellow beacon luminous >100 cd intensity Red beacon luminous intensity >80 cd Magnet holding power <90 kg Weight (with a 10 m cable) 3 kg Weight (with no cable) 600 g 00 i.__electronics Electronics at the service of Industry SAG-105H 12VDC - INFLATABLES VERSION SAG-105 range of IED Electronics. Anemometric alarm. QO___ electronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] Wind speed sensor with sound and light alarms. Designed in accordance with UNE-EN 14960:2014 from the European regulation for inflatables. Measuring range up to 180 km/h Rodamientos de acero inoxidable Beacon with sound and light alarm included Power supply 12 Vdc CA-0106010222 (21/02/2018) All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

Open the catalog to page 1

OPERATION The device performs under the UNE-EN-14960-2014 guidelines. Continuous alarm activation at 37 km/h. Furthemore, intermitent pre-alarm activation at 20km/h. POWER SUPPLY OTHER OPTIONS - SAG-105H 12Vdc is supplied with a 3x0.75mm cable. The unit includes the possibility of changing the alarm trigger values to adapt it to another normative. Wind tunnel calibration certificate An individualizaed certificate for each device is provided. - Power supply: Red wire: + 12 Vdc. Black wire: 0 V. Yellow wire: Ground. The pre-alarm intemittently activates the yellow beacon light. It is activated...

Open the catalog to page 2

All IED COMPANY catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list