Anemo4403_v3_relay_alarm_EN

Product catalog summary

Overview
The document provides technical specifications and operational details for the ANEMO4403 V3 RELAY-ALARM and its configurable version, both wind speed sensors designed for industrial applications such as cranes, solar panels, wind turbines, weather stations, greenhouses, and irrigation systems.

Specifications

ANEMO4403 V3 RELAY-ALARM: Operates with a power supply of 24 Vac/Vdc, with a maximum power consumption of less than 1 VA/W. It features a relay output with NC dry contact, capable of handling 8A at 250Vac.
ANEMO4403 V3 CONFIGURABLE RELAY-ALARM: Operates with a power supply range of 12-24 Vdc, with a maximum power consumption of less than 1 W. It features a relay output with NA dry contact, also capable of handling 8A at 250Vac.

Measurement and Performance

Measurement range: 3-180 km/h
Starting speed: 8 km/h
Survival speed: 200 km/h
Accuracy: 1 km/h (3-15 km/h), 3% (15-180 km/h)

General Features

Material: PA + FV
Bearings: Stainless steel X65Cr13
Connection: 20m cable (4x0.75mm2)
Weight: 1800 g with cable, 150 g without cable
Dimensions: 125x139 mm
Temperature: Storage (-35ºC to +80ºC), Working (-20ºC to +70ºC)
Protection: IP65 and IP54 for configurable version

Operating Conditions

ANEMO4403 V3 RELAY-ALARM: Activates after 30 seconds above 20 km/h, with a 1-hour clamping period post-activation.
ANEMO4403 V3 CONFIGURABLE RELAY-ALARM: Activates after a second of wind speed over the set value, deactivates when wind speed is 1 km/h below the set value, with a minimum output pulse duration of 5 seconds.

Relay Output Configuration
The speed threshold for relay activation can be configured using a rotating switch accessible by unscrewing the lid at the anemometer base. The thresholds range from 20 km/h to 95 km/h.

Connection Details
Both models have specific wiring instructions, with default configurations for NC and NO outputs. Custom configurations can be requested from IED Electronics.

Accessories
Includes stainless steel brackets, magnets for ferromagnetic surfaces, and steel clamps for mounting. A minimum order of 10 units is required, sold exclusively with the wind sensor.

Catalog excerpts

REFERENCES AND ACCESORIES Electrical features ANEMO4403 V3 RELAY-ALARM References Power Supply 24 Vac/Vdc Maximum power consumption <1 VA/W Output type Relay contact Accesories Electrical features ANEMO4403 V3 CONFIGURABLE RELAY-ALARM Power supply 12...24 Vdc Maximum power consumption <1 W Output type Relay contact 0103010505 Stainlees steel bracket AISI 304 01030105061 Stainless steel bracket plus hardware for mounting the wind sensor on the backet 01030105071 Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg 0103010508 2 steel clamps kit that can be fixed to irregular 110 unit minimum order. On sale exclusively with wind sensor. *For other references, please, contact us. General Material Bearings Connection type Weight (with 20m cable) Weight (without cable) Dimensions Storage temperature Working temperature with no ice EMC electronics Electronics at the service of industry EN 61000-6-2:2001 EN 55022:2001, Class B IP65 (UNE 20324:1993) IP54 (UNE 20324:1993) Configurable version ANEMO4403 V3 RELAY-ALARM ANEMO V3 range of IED Electronics. Wind speed sensor designed for different industries and sectors. Q^Led electronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] ANEMO4403 V3 RELAY-ALARM is a wind speed sensor equipped with a relay output that is activated when the wind reaches a preconfigured speed. Industrial design for extrem environments Relay output Stainless Steel bearings Measurement range up to 180 km/h All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

Open the catalog to page 1

ANEMO4403 V3 RELAY-ALARM has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations, greenhouses, irrigation systems... The wind sensor must be fixed on a vertical position. OPERATING Up to 180 km/h of wind speed. Output activation: After a second*2 of wind speed over the set value. Output deactivation: Wind speed 1km/h*3 below the set value. Minimum duration of the output pulse: 5 seconds. The output is not latched.*4 Up to 180 km/h of wind speed. Output activation: After 30 seconds*3 above 20 km/h*2. Output clamping: 1h*4 period after activation....

Open the catalog to page 2

Anemo4403_v3_relay_alarm_EN

Anemo4403_v3_relay_alarm_EN

Catalog excerpts

All IED COMPANY catalogs and technical brochures