Other devices, ANEMO4403 V3 PULSES Range Heated Accessories Pulses with configurable scale 0103011101 ANEMO4403 V3 NPN OUTPUT 20m CABLE 0103010505 Stainless steel bracket AISI 304 01030105061 Stainless steel bracket plus hardware for mounting the wind sensor on the backet 01030105071 Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg 0103010508 2 steel clamps kit that can be fixed to irregular 110 unit minimum order. On sale exclusively with wind sensor. *For other references, please contact us. Electronics at the service of industry ANEMO4403 V3 PULSES OUTPUT ANEMO V3 range of IED Electronics. Wind speed sensor designed for different industries and sectors. IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] ANEMO4403 V3 PULSES OUTPUT has a pulses output proportional to the wind speed given by a reed switch. In this way, the power supply just needs to be enough to detect the contact closing and opening, reducing the power consumption. Industrial design for extreme conditions Reed switch pulses output Measurement range up to 180km/h Stainless steel bearings Low power consumption 2 or 3 wire connection to a PLC CA-01030108 (26/01/2018) All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

ANEMO4403 V3 have been designed to be used in industrial applications: cranes, solar panels, buildings, wind turbines, weather stations... It is usually connected to speed sensors such as tachometers ( see references WM44-EVO, WM44-P V3, WM44-DRM V3), PLCs or data loggers to display the wind speed and/or set alarms to predefined values or to obtain records during predefined periods of time. Electrical features General features Power supply 3.24 Vdc Output Frequency (pulses) Type of contact reed Measurements OPERATION ANEMO4403 V3 CABLE Outputs/Inputs Up to 180 km/h of wind speed Output:...