ANEMO4403 V3 NPN OUTPUT

Product catalog summary

Overview: The ANEMO4403 V3 is a digital output anemometer designed for industrial applications such as cranes, solar panels, wind turbines, weather stations, greenhouses, and irrigation systems. It is available in NPN, PNP, and RS485 Modbus versions, each with specific output characteristics.

Specifications:

Power Supply: 9-30 Vdc
Maximum Current: 100 mA
Measurement Range: 3-180 km/h
Starting Speed: 8 km/h
Survival Speed: 200 km/h
Accuracy: 1 km/h (3-15 km/h), 3% (15-180 km/h)
Material: PA + FV
Bearings: Stainless steel X65Cr13
Protection: IP65
EMC: EN 61000-6-2:2001, EN 55022:2001, Class B

Electrical Features: The anemometer supports NPN, PNP, or RS485 Modbus outputs, with a maximum output current of 100 mA. The connection type varies by model, with specific cable configurations for each.

Operating Conditions:

Storage Temperature: -35ºC to +80ºC
Working Temperature: -20ºC to +70ºC (without ice)

Applications: The device is typically connected to speed sensors, PLCs, or dataloggers to display wind speed, set alarms, or record data over time. It must be mounted vertically for accurate measurements.

Output Details:

NPN Output: 213Hz at 100 km/h, with wind speed calculated as Wind Speed (Km/h) = Hz/2.13.
PNP Output: 10Hz at 1 m/s, with wind speed calculated as Wind Speed (m/s) = Hz/10 or Wind Speed (km/h) = Hz/2.78.
RS485 Modbus: Provides communication via RS485 MODBUS RTU, with a default address of 244 (0xF4) and configurable address range from 1 (0x01) to 255 (0xFF).

Accessories: Various mounting accessories are available, including stainless steel brackets, magnets for ferromagnetic surfaces, and steel clamps for irregular parts.

Contact Information: For further details or custom configurations, contact IED Electronics Solutions S.L. at their website or email.

Catalog excerpts

TECHNICAL SPECIFICATIONS Electrical features References Power supply 9-30 Vdc Output maximum current 100 mA 10utput according to model, each one has only one output type. Measurements electronics Range 3-180 km/h Accessories General features 0103010505 Stainless steel bracket AISI 304 01030105062 Stainless steel bracket plus hardware for mounting the wind sensor on the backet 01030105072 Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg 0103010508 2 steel clamps kit that can be fixed to irregular Bearings Stainless steel X65Cr13 210 unit minimum order. On sale exclusively with wind sensor. Type of connection Cable: 3x0.75mm2 @Anemo NPN/PNP 4x0.65mm2 @ Anemo RS485 Lenght according to reference. Weight (without cable) 160 g *For other references, please contact us. Electronics at the service of Industry IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] CA-010301D (05/07/2018) All dimensions and sizes are approximate. Specifications and prices are subject to change without notice. ANEMO V3 range of IED Electronics. Wind speed sensor designed for different industries and sectors. ANEMO4403 V3 DIGITAL OUTPUT is a digital output Industrial design for extreme environments anemometer, with NPN, PNP and RS485 Modbus NPN, PNP or RS485 MODBUS digital output versions. Stainless Steel bearings

Open the catalog to page 1

ANEMO4403 V3 DIGITAL OUTPUT has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations, greenhouses, irrigation systems... It is usually connected to speed sensors such as tachometers ( see references WM44-EVO11 V3, WM44-P V3, WM44-DRM V3), PLC’s or dataloggers to display the wind speed and/or set alarms to predefined values or to obtain records during predefined periods of time. The wind sensor must be fixed on a vertical position. Up to 180 km/h of wind speed. Output is a RS485 MODBUS RTU communication. The wind sensor must be fixed on a vertical...

Open the catalog to page 2

ANEMO4403 V3 NPN OUTPUT

ANEMO4403 V3 NPN OUTPUT

Catalog excerpts

All IED COMPANY catalogs and technical brochures