0103024473 BS100/3 4-20mA (multifunction display large size 3 digitis) 0103024474 BS100/4 4-20mA (multifunction display large size 4 digitis) 0103024475 BS100/5 4-20mA (multifunction display large electronics Electronics at the 0-10V OUTPUT *Only for 4-20mA OUTPUT version Accessories Other devices of ANEMO4403 V3 range 0103010505 Stainless steel bracket AISI 304 01030105061 Stainless steel bracket plus hardware for mounting the wind sensor on the backet 01030105071 Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg 0103010508 2 steel clamps kit that can be fixed to irregular 110 unit minimum order. On sale exclusively with wind sensor. *For other references, please contact us. IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] ANEMO V3 range of IED Electronics. Wind speed sensor designed for different industries and sectors. CA-01030109/10 (04/01/2018) All dimensions and sizes are approximate. Specifications and prices are subject to change without notice. ANEMO4403 V3 ANALOGUE OUTPUT is an analogue output anemometer, with 0-10V and 4-20mA versions. Output proportional to the wind speed with a full scale of 120 km/h or 180 km/h. Industrial design for extreme environments Analogue output (4-20 mA or 0-10 V) Stainless Steel bearings Low consumption

ANEMO4403 V3 has been designed for industrial applications: cranes, solar panels, wind turbines, weather stations... It is usually connected to devices such as displays (see our references WM44- EVO11, V12, BS100/X, WM44-P AI), PLCs or dataloggers to display the wind speed and/or set alarms to predefined values or to obtain records during predefined periods of time. The wind sensor must be fixed on a vertical position. WIND SPEED - OUTPUT RATIO 4-20 mA OUTPUT Electrical features Measurements Power supply Maximum current Type of output Maximum connectable impedance Output signal proportional to...