QO'l__electronics Other devices of ANEMO4403 V3 range 0103010505 Stainless steel bracket AISI 304 01030105061 Stainless steel bracket plus hardware for mounting the wind sensor on the backet 01030105071 Magnets for flat ferromagnetic surfaces. This fixation system can support up to 90 kg 0103010508 2 steel clamps kit that can be fixed to irregular 110 unit minimum order. On sale exclusively with wind sensor. *For other references, please contact us. Pulses with configurable scale 0103011101 ANEMO4403 V3 NPN OUTPUT Electronics at the service of industry ANEMO5H25 V3 PULSES OUTPUT (HEATED) ANEMO5H25 V3 range of IED Electronics. Heated wind speed sensor designed for different industries and sectors. Q^ledC electronics IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com [email protected] Anemo5H25 V3 PULSES OUTPUT has a pulses output proportional to the wind speed that is given by a reed switch. It incorporates a heater to be able to work in -0°C temperatures. When the temperature is higher than +6°C, it switches itself off automatically to reduce the consumption. Industrial design for extreme environments Reed switch pulses output Measurement range up to 180 Km/h Stainless Steel bearings An external thermostat is not required It Works from -20 °C with ice All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

TECHNICAL FEATURES ANEMO5H25 V3 PULSES OUTPUT has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations... It is a version that has been specially designed to work at low temperatures (from -20°C). It is usually connected to speed sensors such as tachometers ( see references WM44-EVO11 V3, WM44-P V3, WM44-DRM V3), PLC's or dataloggers to display the wind speed and/or set alarms to predefined values or to obtain records during predefined periods of time. OPERATING Survival speed: 180 km/h of wind speed. It gives a pulses output that depends...