*mydirectindustry

210L2

Product catalog summary

Features
The document describes an oil fog lubricator designed for inlet pressures up to 30 bar (435 psi). It features various inlet and outlet connections, including 3/4”-F, 1”-F, 1”1/4-F, and 1”-1/2-F, with options for Gas or NPT by flanges. The lubricator is used upstream of air-operated tools, adding oil fog to the air flow, with the oil flow being proportional to the air flow. It complies with the European directive 2014/68/EU PED and is available in configurations such as Filter + Regulator + Lubricator and Filter-Regulator + Lubricator.

Specifications
The oil rate is adjustable via a knob or screw for the 30 bar version. Recommended oil viscosity is less than ISO VG 22. The operating temperature range is -20°C to +60°C, with a protection degree of IP55. The bowl capacity is 500 cc, and an oil level display is available for pressures up to 16 bar. A sight-feed dome is included for visual monitoring of oil drops.

Materials
The body is made from machined aluminum, the bowl from cast aluminum, and internal components from aluminum and brass. O-rings are made of NBR, with other compounds available on request, and the diaphragm is made of PUR.

Spare Parts
Available spare parts include a complete kit with o-rings, balls, and diaphragm, as well as an oil level display and a complete kit sight-feed dome.

Code Composition Example
An example code is provided for the lubricator, detailing the series, connection type, maximum operating pressure, bowl type, branding, and accessories.

Technical Drawing
The document includes a technical drawing with dimensions for various connection types, both in metric and NPT standards.

Disclaimer
ID Insert Deal reserves the right to change product specifications without notice and does not assume responsibility for product selection, use, and maintenance, which remains the purchaser's responsibility. Reproduction of the document is prohibited without authorization.

Quality Certification
The company operates under a certified quality management system, certificate number 50 100 9191.

Catalog excerpts

Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com 210L2Aluminium oil fog lubricator "series 10" FEATURES Oil fog lubricator for inlet pressure up to 30 bar (435 psi). Inlet and outlet connections: 3/4"-F 1"-F 1"1/4-F 1"-1/2-F Gas or NPT by flanges screwed to the body. EN or ASME flanges available on request. The lubricator add oil fog to the air that flows inside, is installed upstream of air operated tools and equipment. The oil flow is proportional to the air flow, by increasing the air flow the oil flow also increases maintaining the right proportion between air and oil. The lubricator complies with the European directive 2014/68/EU PED. Available units composed of: Filter + Regulator + Lubricator Filter-Regulator + Lubricator

Open the catalog to page 1

SPECIFICATIONS The oil rate can be adjusted by a knob (a screw for 30 bar version) at the top of the lubricator; turn clockwise to reduce the oil rate, anticlockwise to increase. It is recommended to use an oil viscosity less than ISO VG 22 (3°E). Standard version operating temperature: -20°C ÷ +60°C (-4°F ÷ +140°F) Degree of protection: IP55 Bowl capacity: 500 cc (16 US fl oz) Oil level display for operating pressure up to 16 bar. A sight-feed dome shows the drops of oil that drip into the air stream, only for inlet pressure up to 16 bar. MATERIALS Body: aluminium machined from solid bar Bowl:...

Open the catalog to page 2

CODE COMPOSITION EXAMPLE 210L2 # R0 E0 21 I 00 210L2 #: Aluminium series 10 oil fog lubricator R0: Connections G 1-F H1: Maximum operating pressure 16 bar 21: Bowl with cap I0: Branded ID Insert Deal 00: No accessories Copyright © ID Insert Deal S.r.l. - All rights reserved

Open the catalog to page 3

Open the catalog to page 4

ID Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l’idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell’acquirente. Insert Deal does not assume responsibility...

Open the catalog to page 5

All IDINSERTDEAL catalogs and technical brochures

CATALOGUE NEW PRODUCTS
4 Pages
210FR
6 Pages
110F1
5 Pages
2VSS3
6 Pages
R133
6 Pages