*mydirectindustry

210FR

Product catalog summary

Features:
The 210FR is a filter-regulator designed for inlet pressures up to 30 bar (435 psi). It offers various inlet and outlet connection options, including 3/4”-F, 1”-F, 1”1/4-F, and 1”1/2-F, with GAS or NPT flanges. The outlet pressure is controlled by an aluminum piston, and the main valve is balanced with an overpressure relieving function. Filtration rates are available at 5 μm or 50 μm. The unit includes options for automatic or semi-automatic condensate drains and complies with the 2014/68/EU PED directive.

Specifications:
The filter-regulator weighs approximately 3.6 kg and operates within a temperature range of -20 °C to +60 °C (-4 °F to +140 °F). It features a main valve leakage classification of VI (bubble tight) and a flow coefficient of Kv= 5.4 Nm³/h, Cv = 6.3 US gal/min. The degree of protection is IP25, and the bowl capacity is 500 cc (16.9 US fl oz). It includes a 1/4" port for an outlet pressure gauge on both sides and a condensate level display for inlet pressures up to 16 bar.

Materials:
The body, bowl, and bonnet are made of aluminum, with internal parts of aluminum/brass. The main valve spring is AISI 302, and the adjusting spring is C85. The piston is aluminum, and the filter cartridge is sintered bronze. O-rings and main valve gaskets are made of NBR, with other compounds available on request.

Spare Parts and Accessories:
Available spare parts include a complete kit with a filter cartridge, O-rings, and a complete main valve. Accessories include a wall mounting bracket, ring nut for panel mounting, and a pressure gauge for outlet pressure.

Flow Charts:
The document includes flow charts illustrating the relationship between outlet pressure and flow rate for different gases and inlet pressures.

Code Composition Example:
The document provides an example of code composition for ordering, detailing options for connections, inlet pressure, outlet range, filter type, drain type, marking, and accessories.

Technical Drawings:
Technical drawings are provided with dimensions in mm, detailing the design and layout of the filter-regulator.

Disclaimer:
ID Insert Deal reserves the right to change product specifications without notice and does not assume responsibility for the selection, use, and maintenance of products, which remains the purchaser's responsibility.

Catalog excerpts

Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator for inlet pressure up to 30 bar (435 psi). Inlet and outlet connections: 3/4”-F; 1”-F; 1”1/4-F; 1”1/2-F; GAS or NPT by flanges screwed to the body. Connections with EN or ASME flanges available on request. Outlet pressure is controlled by an aluminum piston. The main valve is balanced. Overpressure relieving function. Filtration rate: 5 μm or 50 μm. Available automatic condensate drain SAI or Semi-automatic drain SS up to 16 bar (232 psi). Manual drain SM or cap up to 30 bar (435 psi). Relieving in the standard execution. The product complies with the directive 2014/68/EU PED. Available units composed of: Filter-Regulator + Lubr

Open the catalog to page 1

SPECIFICATIONS Filter-Regulator weight: ~3.6 kg Standard version operating temperature: -20 °C ÷ +60 °C (-4 °F ÷ +140 °F) Main valve leakage classification: VI (bubble tight) Flow coefficient: Kv= 5,4 Nm³/h, Cv = 6,3 US gal/min Degree of protection: IP25 Bowl capacity: 500 cc (16,9 US fl oz) 1/4" port for outlet pressure gauge on both sides Condensate level display for inlet pressure up to 16 bar Automatic drain SAI: drain the condensate before builds up to the filter element Semi-automatic drain SS: drain the condensate every time upstream pressure is dumped MATERIALS Body, bowl and bonnet:...

Open the catalog to page 2

Flow charts Flow rate [Nm^3/h] Recommended flow limit Limite di portata consigliato Flow [Nm^3/h] Recommended flow limit Limite di portata consigliato Copyright © ID Insert Deal S.r.l. - All rights reserved

Open the catalog to page 3

CODE COMPOSITION EXAMPLE 210FR# R0 H1 D0 H 18 I0 00 210FR#: Aluminium filter regulator series 10 R0: Connections G1-F H1: PS=16 bar (232 psi) D0: Outlet pressure range 0,8-8bar H: Filtration 50 ^m 18: Semi-automatic drain (SS) I0: Marked Insert Deal 00: No accessories Copyright © ID Insert Deal S.r.l. - All rights reserved

Open the catalog to page 4

Open the catalog to page 5

Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l’idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell’acquirente. Insert Deal does not assume responsibility...

Open the catalog to page 6

All IDINSERTDEAL catalogs and technical brochures

CATALOGUE NEW PRODUCTS
4 Pages
210L2
5 Pages
110F1
5 Pages
2VSS3
6 Pages
R133
6 Pages