- Catalogs
- Idem Safety Switches
- WPC: Coded Non Contact IDECODE
WPC: Coded Non Contact IDECODE
WPC: Coded Non Contact IDECODE
- Coded Magnetic Actuation with a switching tolerance up to 14mm.
- Compatible with most Safety Relays.
- Standards compliance: ISO14119, EN60947-5-1, EN60204-1, ISO13849-1, EN62061, UL508.
- Safety Classification: Up to PLe Category 4 (ISO13849-1), Up to SIL3 (EN62061).
- Reliability Data: PFHd 8.71 x 10-11, Proof Test Interval of 20 years, MTTFd of 866 years.
- Safety Channels: 1 NC, 2 NC, 3 NO with 24Vdc, 0.2A Max. Rating.
- Minimum Switched Current: 10Vdc, 1mA.
- Dielectric Withstand: 250Vac, Insulation Resistance: 100 Mohms.
- Recommended Setting Gap: 5mm, Switching Distance: Sao 10mm (Close), Sar 20mm (Open).
- Tolerance to Misalignment: 5mm in any direction from 5mm setting gap.
- Switching Frequency: 1.0Hz maximum, Approach Speed: 200mm/min to 1000mm/sec.
- Body Material: UL approved polyester, Operating Temperature: -25°C to +80°C.
- Enclosure Protection: IP69K, IP67, Shock Resistance: IEC68-2-27, 11ms, 30g.
- Vibration Resistance: IEC68-2-6, 10-55Hz, 1mm.
- Cable Type: PVC 6 or 8 core, 6mm OD, Conductors 0.25mm2.
- Mounting: 2xM4 Bolts, Tightening torque 1.0Nm, Any Position.
- Design: Slim fitting suitable for all industry applications, high tolerance to misalignment, durable polyester housing.
- LED indication, no moving parts, survives shock and vibration.
- Quick Connect versions available.
Available without LED if required.
One switch connected to an SCR-21-i or SCR-31-i for Dual Channel monitoring with manual start and contactor feedback check.
- 112013 Idecode WPC 2M 2NC
- 112014 Idecode WPC 5M 2NC
- 112015 Idecode WPC 10M 2NC
- 112016 Idecode WPC QC-M12 2NC
- 112017 Idecode WPC 2M 2NC 1NO
- 112018 Idecode WPC 5M 2NC 1NO
- 112019 Idecode WPC 10M 2NC 1NO
- 112020 Idecode WPC QC-M12 2NC 1NO
- 112105 Idecode WPC 2M 3NC
- 112106 Idecode WPC 5M 3NC
- 112107 Idecode WPC 10M 3NC
- 112108 Idecode WPC QC-M12 3NC
- M12 8 Way Male Plug, Pin view from Switch.
- Flying Lead Colour Circuit (Actuator Present) Output Types Solid State.
- 8 Orange Auxiliary NO or NC, 200mA Max. 24Vdc.
- 5 Brown Auxiliary NO or NC.
- 4 Yellow Safety NC2 +ve, 200mA Max. 24Vdc.
- 6 Green Safety NC2 -ve.
- 7 Black Safety NC1 +ve, 200mA Max. 24Vdc.
- 1 White Safety NC1 -ve.
- 2 Red Supply +24Vdc Supply 24Vdc +/- 10%.
- 3 Blue Supply 0Vdc.
For all IDEM switches, the normally closed (NC) circuits are closed when the guard is closed and the actuator is present.
Catalog excerpts
SECTION 10 CODED NON CONTACT SAFETY INTERLOCK SWITCHES IDECODE - Coded Non Contact Type: WPC FEATURES: Designed with a slim fitting making it suitable for all industry applications Wide 14mm sensing with high tolerance to misalignment High specification and durable polyester housing Wide 14mm sensing with high tolerance to misalignment LED indication - no moving parts - survives shock and vibration Up to: PLe ISO13849-1 2NC 1NO circuits - high switching life - no moving parts Quick Connect versions available Coded Magnetic Actuation Switching Tolerance up to 14mm Will operate with most Safety Relays Quick Connect M12 versions fitted with 250mm (10”) cable CONNECTION EXAMPLE: CODED SWITCH One switch connected to an SCR-21-i or SCR-31-i to give Dual Channel monitoring with manual start and contactor feedback check. Female QC Lead Female QC Lead Safety Classification and Reliability Data: ISO13849-1 EN62061 PFHd Proof Test Interval (Life) MTTFd Safety Channel 1 NC Safety Channel 2 NC Safety Channel 3 NO Minimum Switched Current Dielectric Withstand Insulation Resistance Recommended Setting Gap Switching Distance (Target to Target) Tolerance to Misalignment Switching Frequency Approach Speed Body Material Operating Temperature Enclosure Protection Shock Resistance Vibration Resistance Cable Type Mounting Bolts Mounting Position Up to PLe Category 4 Up to SIL3 8.71 x 10-11 20 years 866 years 24Vdc 0.2A Max. Rating 24Vdc 0.2A Max. Rating 24Vdc 0.2A Max. Rating 10Vdc 1mA 250Vac 100 Mohms 5mm Sao 10mm Close Sar 20mm Open 5mm in any direction from 5mm setting gap 1.0Hz maximum 200mm/min to 1000mm/sec UL approved polyester -25C +80C IP69K IP67 IEC68-2-27 11ms 30g IEC68-2-6 10-55Hz 1mm PVC 6 or 8 core 6mm OD Conductors 0.25mm2 2xM4 Tightening torque 1.0Nm Any For all IDEM switches the normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Quick Connect QC M12 8 Way Male Plug Pin view from Switch 8 5 4 6 7 Flying Lead Colour Orange Brown Yellow Green Black Circuit Output Types (Actuator Solid State Present) Auxiliary NO or NC 200mA Max. 24Vdc Auxiliary NO or NC Safety NC2 +ve 200mA Max. 24Vdc Safety NC2 -ve Safety NC1 +ve 200mA Max. 24Vdc Safety NC1 -ve Supply +24Vdc Supply 0Vdc SALES TYPE NUMBER 112013 Idecode WPC 112014 Idecode WPC 112015 Idecode WPC 112016 Idecode WPC 112017 Idecode WPC 112018 Idecode WPC 112019 Idecode WPC 112020 Idecode WPC 112105 Idecode WPC 112106 Idecode WPC 112107 Idecode WPC 112108 Idecode WPC AVAILABLE WITHOUT LED IF REQUIRED.
Open the catalog to page 1All Idem Safety Switches catalogs and technical brochures
HS-SS-Z and HSM-Z2 Pages
RAMZSense LPZ2 Pages
SCR-74 Pages
Guardian Line Series4 Pages
Python Line Series8 Pages
MICRO SWITCHES4 Pages
KLM-Z-4ST2 Pages
GLS-SS1 Page
LPR (with Integral LED)1 Page
RPC1 Page
INCH-31 Page
RAMZLOCK KLTM-RFID4 Pages
IDEM 2012 PRODUCT CATALOGUE152 Pages
Archived catalogs
2008 Main Catalogue56 Pages