Integral LED (options available) Magnetic Actuation - Power Series Switching Tolerance up to 10mm Will operate with most Safety Relays Quick Connect M12 versions fitted with 250mm (10”) cable Recommended operating direction for optimum performance LED COLOUR AND STATUS LED GREEN (Illuminated when the guard is closed) LED RED (Illuminated when the guard is open) Quick Connect QC M12 8 Way Male Plug Pin view from Switch 4 6 7 1 2 Standard Lead Colour Circuit (Actuator Present) Yellow Green Black White Red For all IDEM switches the normally closed (NC) circuits are closed when the guard is closed and the actuator is present. 140101 Female QC Lead M12 Female 5m. 8 way 140102 Female QC Lead M12 Female 10m. 8 way TYPE Euromag Euromag Euromag Euromag Euromag Euromag Euromag Euromag (with Integral LED) (with Integral LED) (with Integral LED) (with Integral LED) (with Integral LED) (with Integral LED) (with Integral LED) (with Integral LED) 110300 OUTPUT CIRCUITS Plastic 8mm Spacers (2) for use when mounting on Ferrous Materials Standards: ISO14119 EN60947-5-1 EN60204-1 ISO13849-1 EN62061 UL508 Safety Classification and Reliability Data: Safety Channels NC1 and NC2 Voltage free: 250Vac 1.0A Max. Fuse (NC Circuits) Fuse externally 0.8A (F) Contact Release Time <2ms Initial Contact Resistance <500 milliohm Minimum Switched Current 10Vdc 1mA Dielectric Withstand 250Vac Insulation Resistance 100 Mohms Recommended Setting Gap 5mm LED Supply Voltage 24Vdc +/-10% NC Switching Distance Sao 10mm Close (Target to Target) Sar 22mm Open LED (Green) Typical 8mm ON 15mm OFF LED (Red) Typical 8mm OFF 15mm ON Tolerance to Misalignment 5mm in any direction from 5mm setting gap Switching Frequency 1.0Hz maximum Approach Speed 200mm/min to 1000mm/sec Body Material UL approved polyester Operating Temperature -25C +80C Enclosure Protection IP67 Shock Resistance IEC68-2-27 11ms 30g Vibration Resistance IEC68-2-6 10-55Hz 1mm Mechanical Life Expectancy 10,000,000 switching operations Electrical Life Expectancy 1,000,000 switching operations De-rating Safety Factor 2 Tested to 2,000,000 cycles at 24V 0.2A Cable Type PVC 6 core 6mm OD Conductors 0.25mm2 Mounting Bolts 2xM4 Tightening torque 1.0Nm Mounting Position Any Note: The LED does not indicate the status of the NC Safety Contacts, but indicates that the actuator is aligned to give optimum performance. FEATURES: 2NC circuits for connection to safety relays to achieve up to: PLe ISO13849-1 Integral LED indication of sensing position Choice of LED versions: Green - ON when guard is closed Red - ON when guard is open Popular European fitting suitable for all industry applications Narrow fitting to allow for flush mounting Wide 10mm sensing with high tolerance to misalignment Long life high power switching capability up to 1A M12 Quick Connect versions available MAGNETIC NON CONTACT SAFETY INTERLOCK SWITCHES EUROMAG - Magnetic Non Contact: LPR (with Integral LED)