KOBRA - Tongue Operated Switch Type: KP IDEM KP Interlock switches are designed to provide position interlock detection for moving guards. They are designed to fit to the leading edge of sliding, hinged or lift off machine guards. They provide a forced disconnect of the safety contacts at the withdrawal of the actuator and have an anti- tamper not easily defeatable mechanism. The head can be rotated to give 4 actuator entry positions. For extra durability, Flexible Actuators and Stainless Steel head versions are available. Contact blocks are replaceable with optional explosion proof versions. They are sealed to IP67 and survive most wash down solutions due to the high specification materials. FUNCTIONAL SPECIFICATIONS: Positive Break Contacts to EN60947-5-1 Q High Functional Safety to IS013849-1 3 pole, 4 pole or Explosion Proof Contact Blocks Stainless Steel Head version available Connects to most Safety Relays to give up to PLe Cat.4 Industry Standard Fitting: 52mm wide 98mm long 40mm fixing The head can be rotated to give 4 actuator entry positions. Designed with a hinged lid to fit replaceable contact blocks. Flexible actuators are available and the KP is available with a Stainless Steel head. Heavy Duty Heavy Duty Flexible Standard Flat Plastic Flexible Flexible Stainless Steel PRE-WIRED EXPLOSION PROOF: H inged G uartt Li ft Off G uartt Sliding Guard CONTACT BLOCK OPTIONS: Fining H«IES Safety Classification and Reliability Data: Safety Data - Annual Usage Proof Test Interval (Life) Utilization Category Rated Insulation/Withstand Voltages Travel for Positive Opening Actuator Entry Minimum Radius Maximum Approach/Withdrawal Speed Body Material Head Material Enclosure Protection Operating Temperature Conduit Entry Up to PLe depending upon system architecture Up to SIL3 depending upon system architecture 8 cycles per hour/24 hours per day/365 days Polyester or Stainless Steel 316 Various (See Sales Number)

6.8 6.0 Open Open Open 6.8 6.0 Open Open Open Open Open Open Open Open 6.8 6.0 0mm Open Open Open Open Fits to switch aperture during maintenance and provides multiple padlock holes. Flat Actuator supplied with 300mm (12”) chain. Can be used where poor alignment exists and provides manual insertion of actuator by operator. 2 colour LED (3 wires) Steady Red and Steady Green. Fits to conduit entry and provides option for LED indication based upon switch contacts. APPLICATION EXAMPLE Guard Door Interlocked - Dual Channel (Non Monitored) This system shows interlock switch circuits 11-12 and 21-22...