SECTION 15 HS-SS-Z and HSM-Z - RFID CODED HINGE SWITCH WITH AUTO TEST Electronic Hinge Switch with Auto Test Type: HS-SS-Z and HSM-Z FEATURES & APPLICATION: (Some Pending) IDEM’s HS-SS-Z and HSM-Z Intelligent Series Hinge Switches have been developed to provide and maintain a high level of functional safety. They will connect to most popular standard Safety Relays to maintain a PLe Safety Level even with switches connected in series. They have easy to understand LED diagnostic functions and provide auxiliary outputs for extra diagnostic signals to PLCs or computers. The HS-SS-Z and HSM-Z Hinge Switches are designed to be mounted for interlock position sensing of hinged moving guards. They have been designed to be fitted to the hinged axis of machine guard doors and provide a robust hinge function in addition to interlock position sensing. Enclosures are protected to IP67 / IP69K with a low profile, hygienic design for washdown. The HS-Z hinge switches must be used in combination with a dual channel safety control device e.g. Safety Relay or Safety Controller. They can provide protection to Ple/Cat.4 to ISO 13849-1, and will maintain Ple with other Idem Z-type switches connected in series due to internal test functions of the switches. In addition, each switch provides input, output and guard state LED’s. A maximum of 30 switches can be connected in series. Operation is achieved by the rotating action of an enclosed cam profile and sensing components within the switch. The hinge switch can be adjusted upon installation to provide guard-open output signal anywhere between 0 to 10 degrees. All HS-Z switches are factory set to provide the guard open output signal at 3 degrees. Once set during installation the HS-Z is permanently pinned in order to provide a fully tamper-resistant switching point. HS-SS-Z Hinge Switch HSM-Z Hinge Switch IP69K Stainless Steel 316 Die Cast Mirror Mirror Polished Housing Polished Housing Hinge Switch SAFETY RELIABILITY: IDEM's HS-SS-Z and HSM-Z Hinge Switches employ two microprocessors and they use IDEM’s intelligent system to constantly check all switches. Safety Reliability up to ISO13849-1 PLe. MAIN USER BENEFITS: Connect up to 30 switches in series. Able to connect to most popular Safety Relays without the need for special controllers. Ability to connect to other switches and Emergency Stops in series. Up to 800N axial force. Blank hinges are available. Mounting brackets available for ease of fixing. FUNCTIONAL SPECIFICATION: High Functional Safety to ISO13849-1 - connects to most Safety Relays to maintain PLe. Safety Outputs short circuit protected. One Auxiliary circuit for indication of door op

(Some Pending) Standards: ISO 14119 IEC 60947-5-1 EN62061 EN60204-1 ISO 13849-1 UL508 Technical Data: Rated Operating Voltage 24 Vdc -15% +10%Use SELV/PELV Power Consumption 0.7 W Outputs Rated Voltage 24 Vdc Outputs Max. Current 0.2 A Outputs Min. Current 1 mA Outputs Type PNP Inputs Rated Voltage 24 Vdc Inputs Rated Current 2 mA Auxiliary Signalling Output Rated Voltage 24 Vdc Auxiliary Signalling Output Max. Current 0.2 A Signalling Output Type PNP Assured Switching Angles Off 10 Degrees Typical Switching Angles Off 0 – 10 Degrees (Adjustable) Response Time Guard Open 60ms max. Response Time...