Web Server Module

Product catalog summary

General Specifications:
The IDEC Web Server Module operates at a rated power voltage of 24V DC, with an allowable voltage range of 20.4 to 26.4V DC. It has a current draw of 70mA and can withstand momentary power interruptions up to 10ms. The module's dielectric strength is 500V AC for 1 minute, and it has an insulation resistance of 10MΩ minimum. It is resistant to noise with specific thresholds for DC power terminals and Ethernet cables. The operating temperature range is 0 to 55˚C, and it can be stored between –40 to +70˚C. The module is protected against corrosion and has a degree of protection rated at IP20.

Interface Specifications:
The module supports RS232C to Ethernet conversion, with Ethernet specifications compliant with IEEE802.3. It supports transmission speeds of 10BASE-T/100BASE-TX and various communication protocols including TCP, SMTP, HTTP, and Telnet. The serial interface supports speeds from 9600 to 115200 bps and uses asynchronous synchronization.

Major Functions:
The module allows remote maintenance, web server configuration, and data exchange via Ethernet. It supports alarm messaging with up to 32 message types and two email addresses per message. The web file area is 512 Kbytes, and it is compatible with Internet Explorer 6.0 and Netscape 7.2.

Connectivity and Monitoring:
The module facilitates monitoring, control, and maintenance of production systems from any location. It supports real-time updates and customizable messaging. The module can be configured with password protection for secure access. It allows for remote monitoring and control using standard internet browsers and supports custom template creation using JAVA programming.

Additional Features:
The module supports data transmission and reception with external devices in a 1:1 format. It enables easy monitoring and configuration changes using IDEC WindLDR software over an Ethernet network. For enhanced graphical display and data archiving, OPC servers or SCADA software can be used. The module offers significant time and cost savings by allowing remote access to system parameters.

Catalog excerpts

Interface Specifications IDEC Web Server Module Part Number RS232C <=> Ethernet conversion function Ethernet Specifications Electrical characteristics: Transmission speed: Communication protocol: Ethernet protocol: Electrical characteristics: EIA RS232C Transmission speed: 9600 to 115200 bps Synchronization: Asynchronous Communication protocol: Full duplex Transmission control: RTS/CTS, XON/OFF, None Connection Method Ethernet interface: Serial interface: RJ45 Mini DIN 8-pin connector Cable Type No.: FC4A-KC3C Remote maintenance: Uploading, downloading and monitoring using WindLDR via Ethernet Web Server module including interface cable, manual on CD-ROM and Quick Start guide General Specifications Rated Power Voltage Allowable Voltage Range Current Draw Allowable Momentary Power Interruption Dielectric Strength Insulation Resistance Noise Resistance DC power terminal: 1.0kV, 50ns to 1µs Ethernet cable: 0.5kV, 50ns to 1µs (coupling clamp) Inrush Current Operating Temperature Storage Temperature Relative Humidity Pollution Degree Corrosion Immunity Free from corrosive gases Vibration Resistance When mounted on a DIN rail: 5 to 9Hz amplitude 3.5 mm 9 to 150Hz accelaration 9.8m/s2 (1G) 2 hours in each of 3 axes Shock Resistance 147m/s2 (15G), 11ms duration 3 shocks each in 3 axes Weight (approx.) Major Functions Complies with IEEE802.3 10BASE-T/100BASE-TX (Not CE compliant) IP/ICMP/ARP TCP/SMTP/HTTP/Telnet No. of TCP connections: 1 Monitor, Control and Maintain Production From Anywhere Web server: Configure the web server unit using Internet Explorer etc. Reading and writing PLC operands using Java applet. Web file area: 512 Kbyte Compliant browser: Internet Explorer 6.0 Netscape 7.2 Data Exchange: User communication using Ethernet Alarm Messaging: Registered outgoing message 32 message types 3 characters max. 2 email addresses 64 address characters max. Utility CD: Configuration file, PLC operand monitor sample programs, sample program configuration instructions, instruction manual Specifications and other descriptions in this catalog are subject to change without notice. ••Mounting Hole Layout for Direct Mounting Connectable Devices ∗5.6mm when the clamp is pulled out ••Programmable Controllers IDEC FC5A MicroSmart (available soon) IDEC FC4A MicroSmart IDEC FC3A OpenNet Controller IDEC FC2A Micro3C ••Operator Interface (RS232C communication with PLC through Ethernet) IDEC HG2F www.idec.com 1-800-262-IDEC ©2006 IDEC Corporation. All Rights Reserved. Catalog No. FC9Y-B200-0 17.5k 4/06 IDEC Web Server Module

Open the catalog to page 1

Save Time and Experience Faster, Easier Ethernet Connectivity Remote Maintenance • Easily monitor machine conditions, change machine configurations, or upload and download user programs from anywhere, using IDEC WindLDR software over an Ethernet network. • Using the IDEC Web Server Module on an Ethernet network, an IDEC PLC can be configured as a host to an IDEC operator interface. This allows the touchscreen and PLC to be in separate locations. • For a more graphical display and remote data archiving, OPC servers, such as IDEC WindSRV or standard SCADA software, can be used. • Save time and...

Open the catalog to page 2

All IDEC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list