LF1 Series Adjustable Supports LED Illumination Units Adjustable mounting angle 0° to 90° in 10° increments Flexible mounting on machines • The adjustable supports hold the LED illumination unit at a required angle. • In an application for inspection, the angle of the LED illumination unit can be adjusted for the convenience of the inspector. Application Examples Internal illumination for machine tools, metal processing machines, semiconductor production equipment, printing presses, chip mounters, and automatic production machines; illumination for visual inspection, etc. Mounting Example Adjustable Support for LF1 Series Applicable LED Illumination Unit LF1B-A, -B, and -C (-D not applicable) LF1A-A, -B, and -D LF1A-D2F Package Quantity 1 pair (right and left) Stainless steel The angle is adjusted using hex socket bolts. Applicable environment and mechanical strength depend on the LED illumination unit. The above figure illustrates the LF9Z-1MA1. Mounting Hole Layout Note: Same as the LED illumination unit. Specifications and other descriptions in this leaflet are subject to change without notice. 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan Tel: +81-6-6398-2571, Fax: +81-6-6392-9731 E-mail: [email protected] IDEC CANADA LIMITED Tel: +1-905-890-8561, Toll Free: (888) 317-4332 Fax: +1-905-890-8562 E-mail: [email protected] Tel: +61-3-9763-3244, Toll Free: 1800-68-4332 Fax: +61-3-9763-3255 E-mail: [email protected] IDEC ELECTRONICS LIMITED IDEC ELEKTROTECHNIK GmbH IDEC TAIWAN CORPORATION IDEC (SHANGHAI) CORPORATION Tel: +86-21-5353-1000, Fax: +86-21-5353-1263 E-mail: [email protected] IDEC IZUMI ASIA PTE. LTD. Tel: +65-6746-1155, Fax: +65-6844-5995 E-mail: [email protected]