*mydirectindustry

Catalogs
IDEC
Sensor catalog

Sensor catalog

1 / 55 PagesView full catalog

Sensor catalog

Product catalog summary

Installation and Adjustment Procedures

Projector and Receiver Alignment: Align the projector and receiver by moving them until the operation LED is activated, then secure them in the center of this range for stability.
Polarized Retroreflective Installation: Position the reflector perpendicular to the optical axis and adjust the SA1E switch for optimal LED activation.
Diffuse-Reflective and Other Types: Ensure the SA1E switch is positioned to detect objects effectively, maintaining a stable operation LED in both incident and interruption states.

Sensitivity Adjustment

Adjust sensitivity using the provided table, especially for small or translucent objects, with a maximum torque of 0.05 N·m.
Ensure the stable LED is on during stable incident and interruption states; use an optional slit for small objects.

Power Supply and Wiring

Do not use the SA1E switch immediately after power-on; use a power supply with minimal noise within the rated voltage range.
Ground the FG terminal with a switching power supply to prevent noise interference and avoid parallel wiring with high-voltage lines.

Installation Guidelines

Avoid extreme conditions like heat, vibration, or chemical exposure during installation.
Prevent direct light from entering the receiver and maintain appropriate distances between switches to avoid interference.
Regularly clean and maintain optical elements to ensure performance.

Specifications and Features

SA1U sensors offer universal voltage compatibility, IP67 rating, and multiple sensing methods including through-beam and polarized retroreflective.
Features include operation and stable LED indicators, SPDT contact for relay output, and NPN/PNP open collector outputs.
Sensing range up to 50m for through-beam and various ranges for other types, with specific power and control output details.

Specifications: The document details specifications for through-beam projectors and other photoelectric sensors, including universal voltage power supply circuits and relay contact output as SPDT. Main circuit configurations include PNP and NPN types.

Terminal Arrangement and Operation: Terminal arrangements for various models are detailed, with notes on terminals not available for DC power types. An operation chart illustrates control output and LED operation under different conditions.

Characteristics and Performance: Graphs and charts illustrate performance characteristics such as excess gain, lateral displacement, and angle measurements for different sensor models.

Installation Instructions: Emphasizes proper installation to maintain waterproof characteristics and prevent damage, with recommended tightening torques for screws.

Wiring and Connection: Guidelines for connecting cables, including insulation lengths and terminal connections, stress the importance of using appropriate cables and avoiding parallel wiring with high-voltage lines.

Indicator and Output Operation: Explains LED operation (yellow for operation, green for stability) with a table summarizing LED status under different conditions.

Optical Axis Alignment: Details procedures for aligning the optical axis for different sensor types to ensure accurate detection.

Sensitivity Adjustment: Provides instructions for adjusting sensor sensitivity to ensure stable operation and correct object detection.

Additional Notes: Includes notes on maintaining sensor performance, such as avoiding excessive tightening of screws and using appropriate cleaning materials for optical elements.

Overview: The document provides technical specifications and operational guidelines for IDEC's SA1C-FK and SA1C-F series fiber optic sensors, designed for high-speed, precise detection in industrial applications.

Key Features:

High-speed, miniature photoelectric sensors with analog (4-20mA) and digital output.
Capable of detecting gradual color changes, suitable for color mark applications or simple presence/absence detection.
Available with red or green LEDs, through-beam, and reflected-light sensing options.
Compact design allows for DIN rail mounting and IP66 protection rating ensures durability.

Specifications:

Power Voltage: 12 to 24V DC with a ripple of 10% maximum.
Current Draw: 80mA maximum.
Analog Current Output: 4 to 20mA, with a 5V DC maximum.
Digital Output: NPN open collector, 30V DC, 100mA maximum.
Response Time: 0.5ms maximum.
Operating Temperature: -25 to +55°C, with storage temperature ranging from -30 to +70°C.
Extraneous Light Immunity: Sunlight up to 10,000 lux, incandescent light up to 3,000 lux.
Degree of Protection: IP66, ensuring dust-tight and water-resistant performance.

Operational Guidelines:

Adjust the sensing distance by turning the control clockwise to lengthen it.
Background suppression type does not provide a stable LED.
Operation modes include Dark ON and Light ON, selectable by connecting the MODE line appropriately.

Applications: Ideal for remote sensing applications where mounting regular or miniature sensors is challenging, suitable for high-speed manufacturing environments due to fast response time and variable off-delay features.

Accessories: Lists various accessories such as reflectors, mounting brackets, slits, connector cables, and air blower mounting blocks to enhance sensor functionality and installation flexibility.

Overview: Provides technical specifications and descriptions for various fiber optic sensor units and accessories used in industrial automation.

Specifications:

Fiber Optic Units: Describes models like SA9F-TS21, SA9F-TC21, and SA9F-TM21 with specifications like fiber type, diameter, and detection capabilities.
Mounting and Dimensions: Details on threaded mounts, sleeve options, and dimensions for each unit.

Procedures and Usage:

Detection Capabilities: Units can detect objects as small as 0.03mm to 0.3mm depending on the model.
Sensing Ranges: Vary based on LED type and speed.

Accessories:

Mounting Brackets: Models like SA9Z-K01 and SA9Z-K02 for secure installation.
Reflectors: Models such as IAC-R5 and IAC-R6 with specific reflecting areas and materials.
Air Blower Mounting Block: Details on installation and components included.

Recommendations:

Ensure compatibility of fiber units with accessories like sleeves and reflectors.
Follow specified torque settings for mounting to avoid damage.

Catalog excerpts

Sensors IDEC Sensors Selection Guide PLCs OI Touchscreens IDEC Sensors Selection Guide Page 171 187 Series SA1E SA1U 0 15m 0 - 50m 0.05 - 4m 0.2 - 7m Diffuse Proximity (SA1E Class 1 Laser models available) 0 -700mm 50 - 150mm 0 - 1m Small-beam reflective 50 - 150mm – Background Suppression (SA1E Class 1 Laser models available) 50 - 250mm 0.2 - 2m Convergent 5 - 35mm – Transparent 2m – Optic Function Automation Software Through-beam (SA1E Class 1 Laser models available) Polarized Retro-reflective (on R2 reflector) Power Supplies V DC Power Supply Output 10 - 30 V AC/V DC PNP √ √ √ Specifications...

Open the catalog to page 2

Sensors IDEC Sensors Selection Guide OI Touchscreens Fiber Optic Optic Function 199 Series SA1C-FK SA1C-F 0 - 60mm 0 - 60mm 12 - 24 10 - 30 Diffuse Proximity with Fiber Optic Power Supply Output V DC PNP √ NPN √ Cable √ √ Connector – – Dimensions (mm) 26 x 72.7 x 13 26 x 72.7 x 13 Housing Material PBT PBT Mechanical Protection IP66 IP66 Connection √ Automation Software Specifications 196 PLCs Page Approvals Power Supplies Sensors Communication Barriers 800-262-IDEC (4332) • USA & Canada 161

Open the catalog to page 3

Sensors OI Touchscreens Datalogic Sensors Selection Guide Datalogic Vision Sensor Series DATAVS1 DATAVS2 PLCs Appearance Automation Software Page Highlights visit www.IDEC.com/sensors • Immediate Setup without PC • VSC Configurator with 3.5” LCD display • Completely embedded sensor • Stand-alone functioning • Real time monitoring • Object Recognition tools and OCV • Versatile PC setup • Wizard-based software • Ethernet communication • Object recognition or identification tools • 360˚ pattern match • Monitoring and tuning via VSM monitor • Multiple controls • IP discovery function Tools √ Power...

Open the catalog to page 4

Sensors Datalogic Sensors Selection Guide Series S5 S10 S15 S50 OI Touchscreens Datalogic M18 Tubular Photoelectric S51 Appearance Page visit www.IDEC.com/sensors 0 - 18m 0 - 20m 0 - 20m, 0 - 60m class 1 laser 0 - 20m Retro-reflective 0.1 - 4m 0.1 - 4m 0.1 - 4m 0.1 - 4m 0.1 - 4m Polarized Retro-reflective 0.1 - 3m 0.1 - 3m 0.1 - 3m 0.1 - 4m, 0.1 - 16m class 1 laser 0.1 - 3m Transparent 0.1 - 0.8m 0.1 - 0.8m Diffuse 1 - 100mm, 1 - 350mm, 0 - 600mm 1 - 100mm, 1 - 350mm, 0 - 600mm Fixed focus 15mm 14mm – 0.1 - 1.3m – 0 - 100mm, 0 - 350mm, 0 - 700mm, 0 - 350mm class 1 laser 0 - 100mm – 100mm 1 -...

Open the catalog to page 5

Sensors OI Touchscreens Datalogic Sensors Selection Guide Datalogic Miniature and Fiber Optic Photoelectric Series SMall S40 S41 S8 S7 PLCs Appearance Page visit www.IDEC.com/sensors 0 - 2m 0.1 - 6m Retro-reflective 50 - 1500mm 0.1 - 3m 0.1 - 1m 0.1 - 2.5m, 0.1 - 6m class 2 laser Polarized Retro-reflective Operating Distances Automation Software Through-beam 0.1 - 6m – – – – – 0.1 - 2.5m 0 - 10m class 2 laser, 0.1 - 5m – Transparent – 0.1 - 0.7m 0.1 - 0.7m 0 - 0.8m – Diffuse – 50 - 300mm, 40 - 150mm class 2 laser 2 - 350mm 0 - 500mm – 15 - 100mm, 20 - 600mm class 2 laser 110mm Fixed focus 3 -...

Open the catalog to page 6

Sensors Datalogic Sensors Selection Guide Series S6 S60 S62 OI Touchscreens Datalogic Compact Photoelectric S90 Appearance PLCs Page visit www.IDEC.com/sensors Through-beam 0 - 20m Retro-reflective 0.1 - 6m 0 - 20m, 0 - 60 class 1 laser – – 0 - 20m, 0 - 60m class 1 laser – – Transparent 0.1 - 1m 0 - 1.7m – 0 - 1.7m Diffuse 10 - 900mm, 50 - 2000mm 10 - 1000mm, 50 - 2000mm, 0 - 600mm class 1 laser – 10 - 1000mm, 50 - 2000mm, 0 - 600mm class 1 laser Background suppression 1 - 100mm, 30 - 250mm, 100 - 500mm 70 - 200mm, 50 - 100mm class 1 laser Foreground supression Operating Distances 0.1 - 5m 50...

Open the catalog to page 7

Sensors OI Touchscreens Datalogic Sensors Selection Guide Datalogic Maxi Photoelectric Series S20 Operating Distances Page visit www.IDEC.com/sensors Through-beam 0.1 - 50m Retro-reflective - Polarized Retro-reflective 0.1 - 8m Diffuse 0.1 - 2m Background suppression 10 - 50cm Power supply Technical Automation Software PLCs Appearance 12 - 24VDC, 12 - 240VAC/DC Approximate dimensions (mm) 26 x 65 x 55 Housing material ABS Mechnical protection IP66 Power Supplies Datalogic Proximity Series M4 M5 M8 M12 M18 M30 Appearance Sensors Page visit www.IDEC.com/sensors 0.8mm 0.8mm 2mm shielded models,...

Open the catalog to page 8

Sensors Datalogic Sensors Selection Guide Series SR21 SR22 OI Touchscreens Datalogic Slot Sensors SRF Appearance visit www.IDEC.com/sensors Slot Sensor 2mm 2mm 30mm, 50mm, 80mm, 120mm Slot depth 50mm 40mm PLCs Page 34mm, 54mm Switching Frequency 25 kHz 10 kHz 1.5 kHz, 3 kHz Light emission IR LED, red/green LED IR LED red LED, class 2 red Laser Setting AUTO-SET push button trimmer trimmer 10 - 30VDC 24VDC 10 - 30VDC PNP, NPN PNP, NPN Automation Software Power supply Output PNP, NPN Connections connector connector connector Approximate dimensions (mm) 20 x 90 x 26 14 x 68 x 37 10x50x59, 10x70x79,...

Open the catalog to page 9

Sensors OI Touchscreens Datalogic Sensors Selection Guide Datalogic Luminescence Sensors Series LD46 LDµ LD50 PLCs Appearance Page visit www.IDEC.com/sensors Automation Software Distance 10 - 100mm 10 - 100mm, fiber optic: 0 - 30mm 0 - 60mm Switching Frequency 2 kHz 2 kHz 2 kHz Light emission UV-HP LED UV LED UV-HP LED Setting +/- SET pushbuttons MARK and BACKGROUND pushbuttons +/- SET pushbuttons Power Supply 15 - 30VDC 10 - 30VDC 15 - 30VDC Output NPN/PNP, 0-5V PNP, NPN, 0 - 7V NPN/PNP Connection cable, connector cable, connector connector Power Supplies 31 x 81 x 58 31 x 81 x 58 31 x 81 x...

Open the catalog to page 10

Sensors Datalogic Sensors Selection Guide Series S80 OI Touchscreens Datalogic Distance Sensors S81 Appearance PLCs Page visit www.IDEC.com/sensors Distance 0.3 - 4m, 0.3 - 7m, 0.3 - 20.3m, 0.3 - 100.3m 0.3 - 4m Digital Resolution 0.9mm, 0.4mm, 0.6mm, 6mm 0.9mm 0.3%, 0.25%, 0.15% 100 Hz (Normal), 500 Hz (Fast) 80 Hz – Light Emission Class 2 red laser Class 2 red laser Response time 5 ms (Normal), 1ms (Fast) 6 ms Serial Interface RS485 Setting Teach-in Automation Software Linearity Switching Frequency – Teach-in Hysterisis – 30 mm 15 - 30VDC 15 - 30VDC PNP, 4-20mA PNP, NPN, 0 - 10V Connection...

Open the catalog to page 11

Sensor catalog

Sensor catalog

Catalog excerpts

All IDEC catalogs and technical brochures