IDEC E-S top Switches
6Pages

HW Switches In basic black or stylish metal, the HW series of 22mm switches from IDEC are available in several styles to dress up any panel. HW pushbuttons and pilot devices are internationally-rated, designed for use almost anywhere in the world, and have removable contact blocks, finger-safe terminals, and tamperproof construction. Choose simple black plastic bezels for clean uniformity or the new chrome-plated metallic bezels for a rugged industrial look. PS5R Slim Line Power Supplies IDEC PS5R Slim Line power supplies have all the features, all the power, and only half the size of traditional power supplies. Save valuable DIN Rail space with the 30W, 60W, 90W, 120W, or 240W models which can fit any of your power needs. The PS5R Slim Line models are UL508 and UL1604 listed for hazardous locations. The 30W and 60W models are also NEC Class 2 rated. The 120W and 240W models comply with SEMI F47 sag immunity requirements. Specications and other descriptions in this catalog are subject to change without notice. Smart Products. Simple Solutions. IDEC Corporation 1175 Elko Drive Sunnyvale, CA 94089-2209, USA Tel (408) 747-0550 Toll Free (800) 262-IDEC Fax (408) 744-9055 Toll Free Fax (800) 635-6246 Email: opencontact@idec.com IDEC Australia Pty. Ltd. 2/3 Macro Court Rowville, Victoria 3178, Australia Tel +61-3-9763-3244 Toll Free (1800) 68-IDEC Fax +61-3-9763-3255 Email: sales@au.idec.com IDEC Electronics Ltd. Unit 2 Beechwood Chineham Business Park Basingstoke Hampshire RG24 8WA, United Kingdom Tel +44 (0) 1256-321000 Fax +44 (0) 1256-327755 Email: sales@uk.idec.com IDEC IZUMI (H.K.) Co., Ltd. Unit 1505-1507, DCH Commercial Centre No. 25 Westlands Road Quarry Bay, Hong Kong Tel +852-2803-8989 Fax +852-2565-0171 Email: info@hk.idec.com IDEC Taiwan Corporation 8F-1, No.79, Hsin Tai Wu Road, Sec. 1 Hsi-Chih, Taipei County, Taiwan Tel +886-2-2698-3929 Fax +886-2-2698-3931 Email: service@idectwn.com.tw IDEC Canada Ltd. Unit 22-151 Brunel Road Mississauga, Ontario, L4Z 1X3, Canada Tel (905) 890-8561 Toll Free (888) 317-IDEC Fax (905) 890-8562 Email: sales@ca.idec.com IDEC IZUMI Corporation 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku Osaka 532-8550, Japan Tel +81-6-6398-2571 Fax +81-6-6392-9731 IDEC Elektrotechnik GmbH Wendenstraße 331 D-20537 Hamburg, Germany Tel +49-40-2530540 Fax +49-40-25305424 Email: service@idec.de IDEC IZUMI Asia Pte. Ltd. No. 31, Tannery Lane #05-01 Dragon Land Building, Singapore 347788 Tel +65-6746-1155 Fax +65-6844-5995 Email: generalinfo@idecasia.com.sg IDEC IZUMI (Shanghai) Co., Ltd. Room E, 15F, Majesty Building No. 138 Pudong Avenue Shanghai 200120, P.R.C. Tel +86-21-5887-9181 Fax +86-21-5887-8930 Email: idec@cn.idec.com IDEC E-Stop Switches Simply Safe www.idec.com ©2004 IDEC Corporation. All Rights Reserved. Catalog No. XW9Y-B100-1 09/04 15K Smart Products. Simple Solutions.

Revolutionary “Safe Break Action” Design Safest Emergency Stop Switches in the World! The emergency stop button is a critical component on any machine because its failure can have severe implications. A malfunction can cause equipment damage, personal injury, down time, etc., and may even lead to catastrophic failures like res and life-threatening accidents. Malfunctions caused by dislocation of the contact blocks can occur due to improper installation of the switch, accidental removal of the contact block, improper wiring, and even from vibration during the transportation of a nished...

Important Safety Information When Safety Matters. . . Reach for the World’s Safest E-Stop Conventional Emergency Stop Switches Normal Status Direct Opening Action Contacts are opened when the operator is locked, and remain opened until the operator is unlocked intentionally. (IEC60947-5; 6:2) NC contacts: OFF (machine cannot operate) NC contacts: ON (machine can operate) High NC contacts are always on standby to turn on (hazardous) Safety Interlock Mechanism Rated Insulation Voltage: 250V minimum Rated Thermal Current: 2.5A minimum Normal Status NC contacts: OFF (machine cannot operate) NC...

XA & XW Information XW 22mm Jumbo E-Stops XW 22mm 60mm Jumbo Mushroom Button with Screw Terminals XA 16mm 40mm Mushroom Button with PCB Terminals NO Contacts Part Numbers Part Numbers XA 16mm 40mm Mushroom Button with Solder Terminals NO Contacts Part Numbers • IDEC’s original “Safe Break Action” ensures the contacts open if the contact block is separated from the operator • The depth behind the panel is only 48.7mm for 4 contacts (XW Series) • Pushlock Reset and Push-Pull • Rated Insulation Voltage - 16mm 300V, 22mm 250V • Rated Thermal Current 5A • UL, c-UL approved. EN compliant Part...

IDEC Traditional E-Stops HA 16mm E-Stop TW 22mm E-Stops 40mm Mushrooms HA 16mm Pushlock Turn Reset 29mm Mushroom TWTD 30mm E-Stops 40mm Mushrooms TW 22mm Pushlock Turn Reset TWTD 30mm Pushlock Turn Reset Plastic Bezel Part Number Part Number 1NC Short Body Solder Terminals 2NC Short Body Solder Terminals HW 22mm & HN 30mm Unibody E-Stops IDEC also offers a wide range of traditional E-Stops. You can count on IDEC to maintain the highest quality and innovation in creating the best E-Stops available. There are a large number of sizes, applications, locking mechanisms, releases, designs and...

IDEC Traditional E-Stops and Accessories Standard Operating Condition Operating Temperature: Non-illuminated -25 to +60˚C Without Freezing Illuminated -25 to +55˚C Without Freezing Operating Humidity: 45 to 85%RH Without Condensing Storage Temperature: 45 to +80˚C Operating Force HW 22mm EMO Pushlock Turn Reset 40mm Mushroom Pushlock: 10.5N Pull Reset: 10N Turn Reset: 0.16N-m Pushlock: 32N Pull Reset: 21N Turn Reset: 0.27N-m Minimum Force to Latch Metal Bezel Plastic Bezel Metal Bezel Maximum Travel to Latch Maximum Travel Shock Resistance Operating Extremes: 150m/s2 (15G) Damage Limits:...