Time Range 0.1 second to 600 hrs0.1 second to 180 hrs0.01 second to 99.9 hrs0.1 to 600 seconds Contact Confi guration DPDTSPDT, DPDTSPDT, DPDTSPDT, DPDT Repeat Accuracy 0.25% maximumѱ0.2% maximum0.3% maximumѱ0.4% maximum Contact Load Rating (resistive)10A, 240V ACSPDT: 3A, 250V ACDPDT: 5A, 240V ACSPDT: 3A, 250V ACDPDT: 5A, 240V AC5A, 250V AC > UL Listedc-uL Listed TUV CEUL Listedc-uL Listed CEUL recognizedTUV CSA CEUL Listedc-uL Listed CE Approvals Available Operating Voltage 100-240V AC12V DC 24V AC/DC100 to 240V AC12V DC 24V AC/DC100 to 240V AC24V AC/DC100 to 240V AC24V AC/DC > Series ModelRTEGT3AGT3DGT3FPage798805813826Appearance...

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers When voltage is applied to the coil, the contacts remain in the off state and the set time begins. At the end of the set time, the contacts transfer to the Voltage is applied to the coil at all times. When a start signal is supplied, the relay contacts remain in the on state off state and the set time begins. At the end of the set time, the contacts transfer to the and remain in the on state until the set time elapses. The timer cycles between the two states until power is removed from the coil. Removing...

Voltage is supplied to the coil at all times. When a maintained start signal is supplied, the contacts immediately transfer to the Voltage is supplied to the coil at all times. When a maintained start signal is supplied, the contacts remain in the on state and the set time be-gins. When the set time has elapsed, the contacts transfer to the off state and the set time begins. When the set time has elapsed, the contacts transfer to the off state . The contacts remain in the on state . The contacts remain in the off state until the start signal is removed. The contacts transfer back to the on state...

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers Voltage is applied to the coil at all times. When a momentary start signal is sup-plied, the contacts remain in the off state and the preset time begins. Following the preset time, the contacts transfer to the on state and remain in the on state for the one-shot preset time. Following the one-shot preset time, the contacts transfer back to the off state and remain there until the timer is reset. The timer can be reset by applying either a reset input or removal of the coil voltage. Ap- plicable model: GT3D-8....

23AB91 45678 Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers 12345678 + ) (~/ - )(~/ + ) (~/ - )(~/

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers I nsert the springs into the outerslots with the projections facing inside. I nsert the springsinto the slots. Socket SR2P-05 Hold-down Spring (sold separately) SFA-203 (use two springs) > Socket SR2P-06 Hold-down Spring (sold separately) SFA-202 (use two springs) >

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers DIN Rail Mount SocketApplicable Hold-Down SpringsStyleAppearanceUse with TimersPart NumberAppearancePart Number 11-Pin Screw Terminal (dual tier) RTE-P2 SR3P-05 SFA-20311-Pin FingerSafe Socket RTE-P2 SR3P-05C8-Pin Screw Terminal RTE-P1 SR2P-06 SR2P-05C11-Blade Screw Terminal SFA-2028-Pin Fingersafe Socket RTE-B1RTE-B2 SR3B-05DIN Mounting Rail Length 1000mm BNDN1000 > AccessoryDescriptionAppearanceUse withPart No.Panel Mount Adapter Adaptor for fl ush panel mounting RTE timers All RTE timers RTB-G01 8-pin...

40.0 Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers 98 maximum > 1.7 48 42.5 48 1161.2 Panel Thickness 0.8 to 5mm Back Wiring Socket >

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers ItemTerminal NumberOperation Set Time T > ItemTerminal NumberOperation Set Time T >

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers ItemTerminal NumberOperation ItemTerminal NumberOperation Set Time T >

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers

ResetStartGate ResetStartGate > Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers CSA Certifi edFile No. LR58183 File No. LR96764 File No. LR83814 UL RecognizedFile No. E55996 Cert. No. BL9801133323911 (LVD)Cert. No. E9971113332388 (EMC) GT3D-2GT3D-3GT3D-4GT3D-8Operation System Solid state CMOS circuitry Operation Multi-modeMulti-mode one-shot output Time Range 0.01s to 99.9 hours Rated Voltage 100 to 240V AC (50/60Hz), 24V AC (50/60Hz)/24V DC Contact Ratings 125V AC/250V AC, 3A; 30V DC/1A (resistive load)125V AC/250V AC, 5A; 30V DC/5A (resistive load) Contact Form Delayed SPDT + instantaneous...

Mode of OperationTime RangeOutputContactRated Voltage CodeComplete Part No.8-Pin11-Pin 1-A: ON-delay 11-B: Interval 1 fi rst 1-C: Cycle 1 (OFF fi rst) 1-D: Cycle 3 (ON fi rst)0.01s to 99.9 hours 250V AC, 3A, 30V DC, 1A (resistive load)Delayed SPDT + instantaneous SPDT100 to 240V AC (50/60Hz) GT3D-2AF20GT3D-2EAF2024V AC/DCGT3D-2AD24240V AC, 24V DC, 5A (resistive load)Delayed DPDT100 to 240V AC (50/60Hz) GT3D-3AF20GT3D-3EAF2024V AC/DCGT3D-3AD24ח > Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers Mode of OperationTime RangeOutputContactRated Voltage CodeComplete...

Switches & Pilot LightsDisplay LightsRelays & SocketsTimersTerminal BlocksCircuit Breakers ItemTerminal NumberOperation ItemTerminal NumberOperation > ItemTerminal NumberOperation ItemTerminal NumberOperation > ItemTerminal NumberOperation ItemTerminal NumberOperation >