Catalog excerpts
Think Automation and beyond... Switches & Pilot Lights IDEC CORPORATION
Open the catalog to page 1025|TWS series (Selection Guide)
Open the catalog to page 2TWS series (Selection Guide) 1025 lluminated Pushbutton Extended with Half Shroud Extended with Full Shroud Mushroom Pushlock Turn Reset
Open the catalog to page 3Highly reliable heavy-duty switches and pilot lights Suitable for industrial use ••HW-C contact blocks are used. ••Degree of protection: IP65 (IEC 60529) ••UL and CSA approved, EN and CCC compliant Applicable Standards EN60947-1 EU Low Voltage Directive CCC No. 2013010305611328 (Pilot light: 2013010304596127) Specifications and Ratings Contact Ratings Contact Block Rated Insulation Voltage Rated Continuous Current Contact Ratings by Utilization Category IEC 60947-5-1 Characteristics Contact Ratings by Utilization Category Operational Voltage AC Operational 50/60 Hz Current DC AC-12 Control...
Open the catalog to page 4TWS Series Specifications ø25 Specifications Operating Temperature Storage Temperature Operating Humidity Contact Resistance Insulation Resistance Dielectric Strength Vibration Resistance Shock Resistance Mechanical Life (minimum operations) Electrical Life (minimum operations) Wegiht (approx.) –25 to +50°C (no freezing) –40 to +80°C (no freezing) 45 to 85% RH (no condensation) 50 mΩ maximum (initial value) 100 MΩ minimum (500V DC megger) Between live and dead metal parts: 2,500V AC, 1 minute (Full voltage illuminated units: 2,000V AC, 1 minute) Damage Limits: 30 Hz, amplitude 1.5 mm...
Open the catalog to page 5ø25 TWS Series Specifications LED Lamp Ratings (LSTD) Part No. Lamp Base Rated Voltage Voltage Range Current Draw Lamp Base Color Voltage Marking Life (reference value) BA9S/13 6V AC/DC 12V AC/DC 24V AC/DC 6V AC/DC ±10% 12V AC/DC ±10% 24V AC/DC ±10% 8 mA 11 mA 11 mA A, R, W: 7 mA, G, PW, S: 5.5 mA 10 mA 10 mA A (amber), G (green), PW (pure white), R (red), S (blue), W (white) Same as illumination color Die stamped on the base Approx. 50,000 hours (The luminance is reduced to 50% the initial intensity when used on complete DC.) X1 LED Chip Protection Diode Internal Circuit Zener Diode...
Open the catalog to page 6TWS Series (Ordering Information) ø25 Ordering Information Standard Units Terminal Cover ••Specify an operator or lens color code in the Part No. ••Full voltage illuminated units are not supplied with a lamp. Order LED lamps separately. Transformer and DC-DC converter illuminated units contain an LED lamp. ••All standard units are UL, CSA, EN, and TÜV approved (except DC-DC converter). ••Terminal covers, nameplates, and accessories are ordered separately. ••When a terminal cover is required, order an applicable terminal cover referring to page 29. The Part No. development charts shown below...
Open the catalog to page 7ø25 TWS Series (Ordering Information) Selector Switch Illuminated Selector Switch ASLS 2 16 22 D N R ASS 2 L 11 N Contact arrangement code Operator (blank): Knob L: Lever Number of positions Note: • See pages C-26 to C-28 for contact arrangement codes. Key Selector Switch ASS 2 K 20 N B Key removable position code 2-position • Maintained (blank): Removable in all positions B: Removable in left only C: Removable in right only • Spring return from right (blank): Removable in left only • Spring return from left (blank): Removable in right only 3-position • Maintained (blank): Removable in all...
Open the catalog to page 8TWS Series Pushbuttons ø25 Flush / Extended Pushbuttons Package Quantity: 1 Extended with Full Shroud ABFS2 AOFS2 Momentary Specify S, W, or 61.5 (3 or 4 blocks) Y when a blue, white, or yellow button is required. Note: The depth behind the panel of the maintained unit is 1.5mm longer than the momentary unit. Note: The depth behind the panel of the maintained unit is 1.5mm longer than the momentary unit. Specify a button color code in place of ➀ in the Part No. B: black G: green R: red S: blue W: white Y: yellow Panel Thickness 0.8 to 4 (Maintained 0.8 to 6) Extended with Half Shroud ABGS2...
Open the catalog to page 9ø25 TWS Series Pushbuttons Mushroom / Pushlock Turn Reset / Push Turn Lock Pushbuttons Package Quantity: 1 Pushlock Turn Reset AVS3 Specify a button color code in place of ➀ in the Part No. B: black G: green R: red S: blue W: white Y: yellow Note: The depth behind the panel of the maintained unit is 1.5mm longer than the momentary unit. M3.5 Terminal Screw Note: The depth behind the panel of the maintained unit is 1.5mm longer than the momentary unit. B: black G: green R: red Y: yellow Push Turn Lock AJS3 Mushroom with Full Shroud ABGS3 AOGS3 • Specify a button color code in place of ➀ in...
Open the catalog to page 10TWS Series Pushbuttons ø25 Push-Pull / Square Flush / Square Extended Pushbuttons Package Quantity: 1 Part No. B: black G: green R: red Y: yellow Note: The depth behind the panel of the maintained unit is 1.5mm longer than the momentary unit. Panel Thickness 0.8 to 4 (Maintained: 0.8 to 5) • Specify a button color code in place of ➀ in the Part No. • Round bezel (metal): Chrome-plated • Square bezel (plastic): Black • Pushbuttons with one or three contact blocks contain a dummy block. • Other contact arrangements are also available. See page C-7 • Push-Pull: Button is maintained in both...
Open the catalog to page 11ø25 TWS Series Pushbuttons Square Twin Pushbuttons Part No. 2NO Square Twin (Maintained) UWQN2 Package Quantity: 1 Dimensions (mm) Button Color Shape Square Twin (Momentary) UWQN1 • Square Twin (Momentary): Two independent momentary switches are contained in one unit, each operated by ON or OFF button. With the ø30 adapter removed from the sleeve, the unit can mount in a ø25.5mm mounting hole for the ø25 series. • Square Twin (Maintained): The contact operates when ON button is pressed and is maintained in the depressed position. The button is reset by pressing the OFF button. With the ø30...
Open the catalog to page 12TWS Series Pilot Lights ø25 Dome / Square / Rectangular (Marking) Pilot Lights Package Quantity: 1 Shape ➁Lens/LED Color Code NA: amber, NC: clear, NG: green, NR: red, NS: blue, NW: white, DNY: yellow A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Without Lamp NA: amber, NG: green, NR: red, NS: blue, NW: white, DNY: yellow A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Without Lamp NA: amber, NG: green, NR: red, NS: blue, NW: white, DNY: yellow A: amber, G: green, PW: pure white, R: red, S: blue, W: white, Y: yellow Without Lamp A: amber,...
Open the catalog to page 13All IDEC USA catalogs and technical brochures
-
LD6A
8 Pages
-
LF2B LED Illumination Units
6 Pages
-
A series Switches & Pilot Lights
40 Pages
-
BA Series Terminal Blocks
52 Pages
-
EF1A Flameproof LED
24 Pages
-
H6 Series
28 Pages
-
Complete PLC Catalog
64 Pages
-
Complete Terminal Blocks Catalog
22 Pages
-
Complete Timer Catalog
52 Pages
-
Complete Relay & Socket Catalog
76 Pages
-
Complete Safety Overview
4 Pages
-
Complete Power Supply Catalog
20 Pages
-
Complete O/I Catalog
29 Pages
-
All Product Brochure
6 Pages
Archived catalogs
-
Lumifa LED Light Catalog
8 Pages
-
YC Series Contactors Catalog
24 Pages
-
YS Series Contactors Catalog
60 Pages
-
Complete Display Lights Catalog
44 Pages
-
All Product Brochure
2 Pages