Safety Overview Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work

Interlock Switches Selection Guide Selection Guide Standard Interlock Safety Switches Series Page Size (mm) Termination Interlock Switches Full Size Enabling Switches Integrated cable Plastic body Plastic body Metal or plastic head Plastic head Die-cast aluminum body Solenoid Locking Safety Switches Series Full Size Size (mm) Safety Control Relays Termination Material Integrated cable Integrated cable Plastic body Metal head, plastic body Plastic body Die-cast aluminum body Plastic body Key Locking Safety Switch HS5E-K Light Curtains Non-contact Safety Switch Integrated cable Integrated cable...

Standard Interlock Safety Switches HS6B Subminiature Interlock Switches Overview Key features: • Only 78 x 30 x 15mm • Two actuator entrances provide flexibility for installation options • Integrated molded cable reduces wiring time • IP67 (IEC60529) • Direct Opening Action • Actuators comply with ISO14119 and EN1088 Direct Opening Action Double Insulation Interlock Switches Part Numbers Actuator Keys (order separately) Part Number Part Number Adjustable actuator 90° angle Adjustable actuator 180° angle Safety Control Relays Cable Length Enabling Switches Contact Configuration Actuators are not...

Interlock Switches Selection Guide Specifications Operating Temperature Storage Temperature Storage Humidity Relative Humidity Pollution Degree Rated Insulation Voltage (Ui) Impulse Withstand Voltage (Uimp) Insulation Resistance 4kv Between live & dead metal parts: 100MΩ maximum Between positive & negative live parts: 100MΩ minimum Class II Degree of Protection Interlock Switches Electric Shock Protection Class Vibration Resistance Operating Extremes Damage Limits Contact Resistance Shock Resistance 5 to 55 Hz, half amplitude 0.5 mm 30Hz, half amplitude 1.5mm 300mΩ maximum Operating Extremes...

Standard Interlock Safety Switches Installation Notes Handling Cables • Do not tighten or loosen the fastened cable conduit of the safety switch • Actuator installation (M4 screw): 1.0~1.5N-m • Minimum bend radius of installed cable: 40mm • Safety switch body installation (M4 screw): 1.0~1.5N-m Recommended Screw Torque Wiring Designations Contact orange-orange/white blue-blue/white • Interlock Switch Dimensions (mm) 10.4 • Interlock Switch HS6B • Using the HS9Z-A61 Straight Actuator • Using the HS9Z-A62 Right-angle Actuator • Using the HS9Z-A65/A66 Angle Adjustable Actuator • Using the HS9Z-A61...

Horizontal Adjustment The base is made of glass-reinforced PA66 (66 nylon). Angle adjustment screws are stainless steel. When using adhesive on screws, take material compatibility into consideration. Vertical Adjustment • Actuator Mounting Hole Layout Straight/Right-angle Actuator 20° metal key inserted in opposite directions. (M3 Hexagon Socket Head Screw) Enabling Switches R2 2.5 Angle Adjustment (M3 Hexagon 4 H .1 Socket Head Screw) ole s) Orienting Insert The orientation of actuator adjustment (horizontal/vertical) can be Horizontal Vertical Adjustment When mounted (5) of actuator adjustment...

Standard Interlock Safety Switches Minimum Radius of Hinged Door Note: Because deviation or dislocation of hinged door may occur in actual applications, make sure of the correct operation before installation. 50 mm Radius Minimum m 50 m dius Door Hinge Minimum Ra Door Hinge Label Label HS9Z-A65 HS9Z-A65 HS9Z-A66 HS9Z-A66 Door Hinge Door Hinge Door Hinge Label Label Door Hinge 50 mm Door Hinge Minimum Radiu 50 mm s Minimum Radiu s • When the door hinge is on extension line of Vertical Swing the actuator mounting surface: Horizontal Swing Horizontal Swing m ius d m 70 m Ra ius mm ad i0 u 7m Min...

Interlock Switches Selection Guide Key features: • Detects detachment of head for enhanced safety • Compact dimensions with up to three contacts • The head orientation can be rotated, allowing 8 different actuator entries • NC contacts with direct opening action (IEC/EN60947-5-1) • M3 terminal screws for easy wiring • Gold-plated contacts suitable for small loads HS5D Miniature Interlock Switches Part Numbers Actuator Keys (order separately) Interlock Switches Plastic Head Type Metal Head Type Monitor Circuit 2NC-1NO Main Circuit Main Circuit Monitor Circuit 3NC Main Circuit Main Circuit Monitor...

Standard Interlock Safety Switches Contact Configuration & Operation Chart Contact Conguration Contact Configuration Terminal Arrangement Contact Operation Chart (reference) Contact Operation Chart (reference) 0 (Actuator Mounting Reference Position) 0 (Actuator Mounting Reference Position) Approx. Approx. 4.6 6.7 Approx. Approx. 4.6 6.7 Approx. 26.4 (Travel: mm) Approx. 26.4 (Travel: mm) : Contact ON (closed) : Contact ON (closed) : Contact OFF (open) : Contact OFF (open) Main Circuit: 11-12 Main Circuit: 21-22 Monitor Circuit: 31-32 / Monitor Circuit: 33-34 Main Circuit Main Circuit Monitor...

Interlock Switches Selection Guide Contact Ratings Operating Voltage (Ue) Rated Operating Current (Ie) Recommended Screw Torque • Safety switch body installation (M4 screw): 1.0~1.5N-m • Actuator installation (M4 screw): 1.0~1.5N-m Installation Notes Gland Port HS5D-ZRN (Metal Head) With HS9Z-A51 Straight Actuator + RP: Reference mounting position. Plastic (red) Plastic (gray) Plastic (red) Plastic (gray) Actuator Actuator Actuator Stop Actuator Stop Gland Port Gland Port Slot Plug (supplied) Slot Plug (supplied) (Note) (Note) Actuator Actuator Actuator Stop Actuator Stop Safety Control Relays...

Slot Plug (supplied) Slot Plug (supplied) (Note) (Note) Standard Interlock Safety Switches Hole Layout Mounting Mounting Hole Layout Actuator Actuator Actuator Stop Actuator Stop Gland Port Gland Port Actuator Actuator Actuator Stop Actuator Stop Slot Plug (supplied) Slot Plug (supplied) (Note) (Note) Gland Port Gland Port Plastic (gray) Plastic (gray) Plastic Head (red) Plastic Head (red) Plastic (gray) Plastic (gray) Plastic Head (red) Plastic Head (red) RP 26.4 RP 42.2 26.4 42.2 6.2 5.2 6.2 5.2 HS5D-RN (Plastic Head) With HS9Z-A51 Straight Actuator Mounting Hole Layout Mounting Hole Layout...