UniPRO Gbis - G.SHDSL Tester

Product catalog summary

Overview
UniPRO Gbis is a compact, hand-held G.SHDSL tester designed for field engineers. It supports the latest G.SHDSL.bis standard and legacy versions, allowing testing of up to 4 copper pairs simultaneously. The device is equipped with a DSL engine and copper layer fault checks, providing ease of use and minimal setup.

Specifications

Dimensions: 280 x 180 x 50 mm
Weight: 1.8 kg
Operating Temperature: 0 to 45°C
Storage Temperature: -25 to +70°C
Environmental Protection: IP20
Battery: Nickel Metal Hydride, 4 hours autonomy, 3 hours recharge time

Testing Capabilities

Physical Layer Tests: Detects open/short circuits, excessive voltage, and alien xDSL services.
DSL Layer Tests: Supports G.SHDSL/G.SHDSL.bis, ATM/IMA/EFM bonding, and automatic synchronization.
Ethernet Layer Tests: Generates OAM CC frames over EFM in CPE mode.

Features and Benefits

Instant switch-on and testing for quick fault detection.
Simultaneous testing of up to 4 pairs, with bonded aggregate performance checks.
Exchangeable RJ45 socket for field user convenience.
Simple setup with multifunction softkeys and a user-friendly interface.
Result memory and USB export for easy data analysis and reporting.

Standards and Approvals

Complies with ITU standards G.991.1, G.991.2, G.802.3ah, G.998.1.
Interference and immunity standards: EN 55022, EN55024.
Safety standards: EN60950-1, EN61010-1.
RoHS compliant.

Accessories

Mains PSU/charger with UK and Euro leads.
DSL cable with plugs/clips.
Quick Reference Card and User Guide on CD.
Carry bag.

Limitations

Not suitable for testing SHDSL connections configured for TDM payloads with plesiochronous clocking.

Catalog excerpts

IDEAL NETWORKS efm ccmtx |EFM: UniPRO Gbis G.SHDSL Tester > Physical tests of > G.SHDSL > Measurement of the copper pairs Synchronisation tests G.SHDSL performance

Open the catalog to page 1

UniPRO Gbis > Comparison with acceptance targets > ATM/I MA/EFM Encapsulation/Bonding > Up to 4 pairs G.SHDSL/ G.SHDSLbis > Simulate both CO and CPE of G.SHDSL G.SHDSL Tester Proof of Performance UniPRO Gbis is a revolutionary tool for testing all types of G.SHDSL service. It combines a state-of-the-art DSL engine with a range of useful copper layer fault checks into a compact, hand-held, battery-powered tester. Designed with the field engineer in mind, UniPRO Gbis provides the ultimate in ease of use, pinpointing common network faults and checking service performance directly from switch on...

Open the catalog to page 2

Line Connector Colour-coding of the 4 pairs throughout the cable, panel and screens for ease of identification with user exchangeable RJ45 Pin G.SHDSL Tester PAIR and BONDING LEDs For instant and highly visible Go/NoGo indication USB Interface & Internal Memory Internal memory for up to 100 tests in .csv format. Data exportable to PC via USB flash drive Mains Charger Input Tester can operate from mains supply or on-board rechargeable long runtime battery Data Mode: Gbis Data Mode: Gbis Data Mode: Gbis Data Mode Gbis Rubber End Caps Field protection and secure hand-held grip QVGA 3%" | Colour...

Open the catalog to page 3

IDEAL NETWORKS IDEAL INDUSTRIES NETWORKS DIVISION Unit 3, Europa Court, Europa Boulevard, Warrington, Cheshire, WA5 7TN, UK. Tel. +44 (0)1925 444 446 | Fax. +44 (0)1925 445501 [email protected] www.idealnetworks.net

Open the catalog to page 4

All IDEAL NETWORKS catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list