OTDR II - Tier-2 Optical Time Domain Reflectometer for Multimode and Single-mode Fibre Cabling
6Pages

Tier-2 Optical Time Domain Reflectometer for Multimode and Single-mode Fibre Cabling Proof of Performance

The OTDR II is the first tablet inspired OTDR that is handy, lightweight and rugged enough for any environment. With a 7-inch outdoor enhanced touchscreen, the most efficient hand held display in the industry, it delivers an unprecedented user experience. Its intuitive Tier-2 Optical Time Domain Reflectometer for Multimode and Single-mode Fibre Cabling user interface including onboard manual ensures a fast learning curve. Plus, its new and improved OTDR platform offers icon-based functions, instant boot-up, automatic macrobend finders as well as improved auto and real-time modes. The...

iOLM – removing the complexity from OTDR testing OTDR testing comes with many challenges... Wrong OTDR traces Countless traces to analyse Repeating the same job twice Complex instrument training/support In response to these challenges, IDEAL Networks is providing a better way to test fibre optics: The intelligent Optical Link Mapper (iOLM) turns complicated graphs into an easy to read diagram displaying all events along the link with pass/fail status for each event. The iOLM is an OTDR-based application designed to simplify OTDR testing by eliminating the need to configure parameters,...

- the essential first step before any OTDR testing Taking the time to properly inspect a fibre optic connector using an IDEAL Networks fibre inspection probe can prevent a host of issues from arising further down the line, thus saving you time, money and trouble. Auto centering User Preferences Did you know that the connector of your OTDR II/ iOLM is also critical? The presence of a dirty connector at an OTDR port or launch cable can negatively impact your test results, and even cause permanent damage during mating. Therefore, it is critical to regularly inspect these connectors to ensure...

OTDR II Single-mode OTDR port SC/APC Optional power meter with SC/UPC connector Multimode OTDR port SC/UPC AC adapter Stylus Two USB 2.0 ports Visual fault locator with 2.5 mm universal connector 10/100 Mbit/s Ethernet port for internet access Built-in Wi-Fi/Bluetooth for easy file sharing Ruggedised housing and protected ports to reduce accidental damage Power on/off/standby Stand support Home/switch application and screen capture (hold) 7-inch outdoor enhanced touch screen

OTDR II - Quad OTDR with IOLM, ICERT (certification to international standards), SC adapters (multimode: SC/UPC, single-mode: SC/APC), visual fault locator, power supply, battery, carrying case For further adapter options, please visit our website. b. Typical dynamic range with longest pulse and three-minute averaging at SNR = 1. c. Typical, for reflectance below -55 dB, using a 3-ns pulse. d. Attenuation dead zone at 1310 nm is 4.5 m typical with reflectance below -45 dB e. At 23 °C ± 1 °C, 1550 nm and FC connector. With modules in idle mode. Battery operated after 20-minute warm-up. For...