LanXPLORER Pro - Network Troubleshooter with Bandwidth Monitoring and Performance Diagnostics
8Pages

IDEAL NETWORKS Monitor Myjob 1000 Mb/S-FD Auto Neg On No-PoE LanXPLORER Pro Network Troubleshooter with Bandwidth Monitoring and Performance Diagnostics

LanXPLORER Pro LanXPLORER Pro is a hand held tester for analysing and diagnosing problems in networks, cabling and Ethernet devices using copper, fibre and Wi-Fi interfaces. Using the LanXPLORER Pro in-line and end point modes, IT Technicians can pinpoint issues that are unable to be found with management software as it physically connects to the point of interest instead of scanning the entire network. LanXPLORER Pro does not examine the contents of the data being analysed therefore personal and confidential information will remain confidential. Network Troubleshooter with Bandwidth...

Voice over IP (VoIP) - Monitor Quality of Service (QoS) in real time using In-Line Mode. Quality of Service (QoS) is measured in real time when LanXPLORER Pro is connected in-line between a VoIP phone using SIP (Session Initiation Protocol) and the network. QoS metrics include jitter, delay, total packets, packet loss, source/destination IP addresses and port number. With standard SIP, signalling processes are shown including call pick up, phone number of both phones and duration. Ethernet Device Diagnostics and Troubleshooting using In-line Mode (Copper) Identifies top 10 bandwidth...

Network Diagnostic and Troubleshooting using End-Point Mode (Copper, Fibre and Wi-Fi) The end-point feature is used to monitor and examine the LAN when connected directly to a network port or a mirrored port. NETMAP/NETVERIFY This function performs a scan of your entire network to identify all active devices by IP address, MAC address and host name which can be saved and compared to future NETMAPs to identify new or removed network devices, or changes in network configuration. Network Discovery Connect to active network ports or Ethernet devices to verify network status and connectivity. •...

Tests Power over Ethernet (PoE) Testing Cable Testing (Copper and Fibre) The LanXPLORER Pro offers a series of tests to aid Using the in-line mode, LanXPLORER monitors the voltage and current used at the device. Copper Cabling Tests • Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard • Distance to fault using TDR technology (copper only) • Ability to identify and trace cables with a compatible amplifier probe (62-164) • Port blink to visually trace cable from work area PoE/PoE+ Load Test outlet to network switch Performs PoE/PoE+ load tests to determine the maximum...

LanXPLORER Pro Ports for copper, fibre and Wi-Fi Save money by employing a single device to test re networks Share test data Provides mobile device connectivity using USB Wi-Fi adapter and free IDEAL AnyWARE app User-exchangeable RJ45 Inserts eld replaceable RJ45 contacts reduce downtime Virtual keyboard efficiently, quickly and easily input data Autotest function Predefine common tests under one Autotest button to improve productivity LanXPLORER PRO 1000 Mb/S-FD Auto Neg On NO-PoE DETECT Autotest IDEAL * AnyWARE In-Line test Diagnose network issues using comprehensive In-Line test...

Send test reports from anywhere using the free app Step 3 • Create job folder • Enter job site information • Perform autotest on copper/fibre cabling and copper/fibre/Wi-Fi networks • Activate LanXPLORER Pro wireless hotspot • Connect your mobile phone or tablet with the IDEAL AnyWARE App • Transfer test reports to your mobile device • View test reports Send • Select reports (PDF or CSV) to send • Select preferred transfer method -email, ftp, cloud storage etc. • Send file • Alternatively save test reports to USB key Download the FREE app today NaviTEK NT Pro • Display network...

Network Troubleshooter with Bandwidth Monitoring and Performance Diagnostics Proof of Performance Ordering Information Part No. Kit Contents LanXPLORER Pro - In-line Network Troubleshooter 1 x LanXPLORER Pro test unit, 1 x remote unit #1, 1 x high sensitivity Wi-Fi antenna, 1 x IDEAL amplifier probe 62-164, 1 x RJ45 insert extraction tool plus 10 x RJ45 inserts, 1 x power module (rechargeable), 1 x mains PSU/charger, 2 x 30cm RJ45 cable, 1 x USB Wi-Fi adapter, 1 x carrying case Optional Accessories Part No. For replacement accessories, please visit our website. Basic Specifications Max. No....