*mydirectindustry

Catalogs
IDE ELECTRIC, S.L.
THERMAL MANAGEMENT

THERMAL MANAGEMENT

Product catalog summary

Overview: The document provides a comprehensive guide on thermal management solutions for industrial cabinets, focusing on air conditioning systems to maintain optimal temperatures for electrical and electronic equipment. Proper temperature control is crucial to prevent overheating and condensation, thereby extending the service life of the equipment.

Key Sections:

Specifications: Detailed specifications for various thermal management components such as filter fans, heating resistors, thermostats, and air conditioners are provided. These include voltage, air flow, operating temperature, noise level, and protection ratings.
Procedures: Instructions on selecting suitable appliances based on environmental conditions are outlined. Recommendations include using fans with filters for low ambient temperatures and air-water exchangers for high humidity and contamination.
Standards and Certifications: The components adhere to standards such as EN 60529 for protection ratings and are certified with CE and ROHS.
Recommendations: The document advises on combining temperature control elements to enhance performance and efficiency. It emphasizes the importance of analyzing work conditions and environmental factors before selecting equipment.
Ventilation: Various models of filter fans are discussed, with specifications on air flow rates, energy consumption, and installation dimensions. Graphs illustrate the performance characteristics of these fans.

Critical Information: The document highlights the importance of maintaining a consistent temperature within electrical cabinets to ensure equipment reliability and energy efficiency. It provides detailed guidance on selecting and installing the appropriate thermal management solutions based on specific environmental conditions.

Overview: The document provides detailed specifications and technical data for various thermal management products, including ventilation systems, heating resistors, thermostats, hygrostats, and surface air conditioners. Each section outlines the key features, dimensions, and performance metrics of the products.

Ventilation Systems: The document lists specifications for ceiling fans and air filter grilles. Key parameters include noise levels, dimensions, energy consumption, static pressure, and protection ratings. The fans are designed for interior to exterior airflow and are made from UL94 V0 ABS and cast iron, with a protection rating of IP54.

Heating Resistors: Specifications for heating resistors without fans are provided, detailing voltage, power, dimensions, and protection ratings. These resistors use PTC elements and are designed for DIN rail assembly. The protection rating is IP20, and they are made from anodised aluminium.

Thermostats and Hygrostats: The document includes specifications for thermostats and hygrostats, highlighting their temperature and humidity ranges, dimensions, and protection ratings. These devices are designed for DIN rail assembly and have a protection rating of IP20.

Surface Air Conditioners: Detailed specifications for surface air conditioners are provided, including cooling power, absorbed electric power, air flow rates, and protection ratings. These units are designed for compact control and command cabinets, with integrated fault signal contacts and door contacts. The protection ratings are IP54 towards the cabinet and IP34 towards the atmosphere.

Key Features and Recommendations: The document emphasizes the importance of protection ratings, energy efficiency, and ease of maintenance. It recommends using these products in environments with specific temperature and humidity ranges to ensure optimal performance.

Overview: This document provides technical specifications and features of various air conditioning and thermal management units, including ASE, AT, IR, and IG series. The units are designed for different installation types and offer varying cooling capacities, energy efficiencies, and protection ratings.

Specifications:

Materials and Design: All units are made from galvanized steel and are colored RAL 7035. They feature integrated condensation fluid evaporation systems and are designed for easy maintenance.
Protection Ratings: The units have an IP54 rating towards the cabinet and IP34 towards the atmosphere, ensuring protection against dust and water ingress.
Cooling Capacities: The cooling capacities vary across models, with ASE2500 offering up to 3500W and AT4000 providing up to 4250W. The IR series offers lower capacities, suitable for specific applications.
Energy Efficiency: The units are designed for high energy efficiency, with some models offering up to 20% energy savings.
Installation and Maintenance: The units are easy to assemble and maintain, with features like fully-removable covers for easy access to control and filter elements.

Graphs and Data: The document includes graphs illustrating the cooling capacity (Q0) against ambient temperature (TAmb) for various models, highlighting performance under different conditions.

Key Features:

Integrated thermostat for temperature control and additional thermostat for excess temperature signaling.
Safe circulation via prolonged ventilation pipe and elimination of hot points.
Wide space between suction and discharge openings for effective air management.

Applications: The units are suitable for lateral partially recessed installation, in-door, or exterior side installation, depending on the model.

Overview: This document provides technical specifications and features of various air-water heat exchangers designed for thermal management in electric cabinets. The models covered include IG1000, IG1500, IG3000, IG3400, IG5000, IG7000, and IG10000, each with varying cooling capacities and specifications.

Specifications:

Voltage and Frequency: All models operate at 230V and support 50/60 Hz.
Cooling Power: Ranges from 1000W for IG1000 to 10000W for IG10000.
Absorbed Electric Power: Varies by model, with IG1000 at 68-78W and IG10000 at 820-1200W.
Air Flow: Interior air flow ranges from 520 m3/h for IG1000 to 6250 m3/h for IG10000.
Noise Level: Noise levels range from 48 dB for IG1000 to 66 dB for IG10000.
Dimensions and Weight: Dimensions and weight increase with model size, with IG1000 being the smallest and lightest, and IG10000 the largest and heaviest.
Protection Rating: All models have a protection rating of IP55, except IG3400 which is IP54.

Features:

Designed for exterior side installation or on doors.
Includes separation of condensation fluid by discharging.
Equipped with an integrated thermostat and solenoid valve for temperature control.
Temperature control includes an integrated alarm contact.
Compact design, no maintenance required, and easily re-paintable.

Graphs and Performance: The document includes graphs illustrating cooling capacity, pressure drop, and water flow rates for each model. These graphs help in understanding the performance under different conditions.

Contact Information: IDE ELECTRIC, S.L. is located in Zuera, Zaragoza, Spain. Contact details include phone number +34 976 451 080 and email [email protected].

Catalog excerpts

THERMAL MANAGEMENT Air conditioning for industrial cabinets

Open the catalog to page 1

THERMAL MANAGEMENT 1st EDITION 2019

Open the catalog to page 3

Contents Ventilation FILTER FANS (Alternating current) FILTER FANS (Direct current) CEILING FANS AIR FILTER GRILLE AND FILTRATION MESHES Heating resistors THERMAL MANAGEMENT

Open the catalog to page 5

THERMAL MANAGEMENT Air conditioning for industrial cabinets Control of the temperature inside the electrical cabinets is a fundamental factor for lengthening the service life and correct operation of the electrical and electronic appliances installed inside. A perfect air conditioning system for forestalling temperature fluctuations which could damage the equipment, preventing overheating and the formation of condensation. The correct choice of temperature control appliances is essential for guaranteeing the correct operation of our electrical panels. How to select the most suitable appliances...

Open the catalog to page 6

Combination of temperature control elements Improves performance and optimises efficiency Air conditioners and air-water heat exchangers = Air-water heat exchanger Guarantees safe, silent refrigeration with total autonomy with respect to the quality of the air. Fans with filter and thermostats + Fans with filter Guarantees energy savings, the thermostat controls the operation of the fan, guaranteeing lower energy consumption and an extended service life of the system. Thermostats, hygrostats and heating resistors Guarantees constant maintenance of the exact temperature. Offers increased safety...

Open the catalog to page 7

THERMAL MANAGEMENT FANS To obtain the correct durability and operation of the components installed in the electric panels, it is essential to maintain an optimum temperature. If the ambient temperature is lower than that required in the electric panel, fans with filter are the best solution. Fans with filter transport the cool and filtered ambient air to the interior of the electric panel. In addition, they slightly increase the pressure, thus preventing dust from entering the cabinet. HEATING RESISTORS The formation of condensation inside the electric cabinets is one of the main hazards for...

Open the catalog to page 8

AIR CONDITIONERS If the ambient temperature is high or higher than necessary in the electric panel, air conditioners should be used. The air conditioner lowers the air temperature inside the cabinet to guarantee the correct temperature. There are various models of air conditioner for installation on the surface, semi-recessed or in the ceiling of the electric cabinet, depending on the needs of the installation and the available space. AIR-AIR HEAT EXCHANGERS If the air is highly contaminated with dust or fluids, the air-air heat exchangers are the recommended option. The exterior air circuit...

Open the catalog to page 9

Graphs Flow rate

Open the catalog to page 10

For the extractor function [outward flow), unscrew the fan, turn it 180°, reversing the axis of rotation, and put the screws back in.

Open the catalog to page 12

C€ IP54 AC Filter fan (280-320 m3/h) Dimensions Specifications For the extractor function [outward flow), unscrew the fan, turn it 180°, reversing the axis of rotation, and put the screws back in.

Open the catalog to page 13

C€ IP54 AC Filter fan (1395-1530 m3/h) Dimensions Specifications Graphs THERMAL MANAGEMENT 15

Open the catalog to page 15

122.5x122.5 Terminal 0.31 7.44 38 Impedance IP54 From exterior to interior Yes Ball bearing RAL 7035 UL94 V0 ABS Nylon fibre 150 g/m³ Autoadhesive polyurethane 0.64 Quick-connect clip CE, ROHS For the extractor function (outward flow), unscrew the fan, turn it 180º, reversing the axis of rotation, and put the screws back in. Voltage Air flow with filter Operating temperature Relative humidity range Filtration efficiency Service (at 40 °C) Noise level Dimensions Thickness of the cabinet wall Cut-off dimensions Electrical connection Current consumption Energy consumption Static pressure Overcurrent...

Open the catalog to page 17

Characteristic curve Specifications Voltage Air flow with filter Operating temperature Relative humidity range Service (at 40 °C) Noise level Dimensions Cut-off dimensions Electrical connection Current consumption Energy consumption Static pressure Static pressure curve Overcurrent protection Protection rating EN 60529 Direction of flow Bearing Material Colour Seal Weight Assembly Certificates

Open the catalog to page 19

THERMAL MANAGEMENT Air filter grille (for VF fans) Dimensions (AxB) Dimensions (D-E) Cut-off dimensions (FxG) Filtration efficiency Operating temperature Relative humidity range Protection rating Material Colour Thickness of the cabinet wall Assembly Certificates 2-3 Autoadhesive polyurethane Quick-connect clip CE, ROHS Installation dimensions Dimensions (AxB) Dimensions (D-E) Cut-off dimensions (FxG) Filtration efficiency Operating temperature Relative humidity range Protection rating Material Colour Thickness of the cabinet wall Assembly Certificates Autoadhesive polyurethane Quick-connect...

Open the catalog to page 20

Dimensions (AxB) Dimensions (D-E) Cut-off dimensions (FxG) Filtration efficiency Operating temperature Relative humidity range Protection rating Material Colour Thickness of the cabinet wall Dimensions (AxB) Dimensions (D-E) Cut-off dimensions (FxG) Filtration efficiency Operating temperature Relative humidity range Protection rating Material Colour Thickness of the cabinet wall Assembly Certificates Autoadhesive polyurethane Quick-connect clip / Bolts CE, ROHS Assembly Certificates Autoadhesive polyurethane Quick-connect clip CE, ROHS Filtration meshes Specifications Grille dimensions Mesh dimensions...

Open the catalog to page 21

Specifications Units Reference RC15SV Specifications Units Reference RC25SV Voltage Power Maximum current Dimensions (AxBxC) Weight Heater element Electrical connection Protection rating Protection class Material Assembly Service/storage temperature Overcurrent protection Certificates Voltage Power Maximum current Dimensions (AxBxC) Weight Heater element Electrical connection Protection rating Protection class Material Assembly Service/storage temperature Overcurrent protection Certificates - PTC resistor Anodised aluminium profile - Clip for DIN rail - PTC resistor Anodised aluminium...

Open the catalog to page 22

C€ Heating resistors without fan Specifications Units Reference RC50SV Specifications Units Reference RC75SV Voltage Power Maximum current Dimensions (AxBxC) Weight Heater element Electrical connection Protection rating Protection class Material Assembly Service/storage temperature Overcurrent protection Certificates Voltage Power Maximum current Dimensions (AxBxC) Weight Heater element Electrical connection Protection rating Protection class Material Assembly Service/storage temperature Overcurrent protection Certificates - PTC resistor Anodised aluminium profile - Clip for DIN rail -...

Open the catalog to page 23

All IDE ELECTRIC, S.L. catalogs and technical brochures

CORPORATE BROCHURE 1ST EDITION 2024
28 Pages
CIRCUIT BREAKERS
1 Page
LIGHT
9 Pages
ATLANTIC PLUS
11 Pages
ATLANTIC
14 Pages
ARGENTA
10 Pages
ARGENTA PLUS
8 Pages
ARGENTA PLUS (FSC)
8 Pages
ARGENTA PLUS (ENL)
12 Pages
CDN4G
2 Pages
MUNDIAL
32 Pages
ROC
6 Pages
HABITAT
6 Pages
SILVER
6 Pages
COMBI
6 Pages
ECOLOGY
10 Pages
BALTIC
10 Pages
GOLD
18 Pages
General Catalogue
446 Pages
SCHUKO-type
6 Pages
General catalogue IDE 2018
410 Pages
INOX Series
16 Pages
ATEX SERIES
16 Pages
Custom solutions
12 Pages
ARGENTA PLUS ENL - PACKS
6 Pages
ECO-STAR System
8 Pages
SITE PANELS
18 Pages
TECNO IP65 Steel terminal boxes
12 Pages
IDE ELECTRIC CATALOGUE
356 Pages

Archived catalogs

MUNDIAL series
16 Pages
Corporate Brochure
24 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list