TECNO IP65 Steel terminal boxes
12Pages

TECNO Technical Specifications (Rolled steel) The terminal boxes range is available in various versions to satisfying all the fitter's needs. They come in cold rolled steel, in AISI 304L and AISI 316L stainless steel, and in ATEX-marked stainless steel (see the specific ATEX section). They are intended for the industrial sector as a machine tool and automation system control box. They have an IP65 degree of protection and are available in a wide variety of sizes, with plain sides or lids for cable entries (see rolled steel version). They have a closing system that uses quick-release screws with watertight caps to ensure greater security. The design and manufacture of this line is perfectly suited to special applications that require particular dimensions or the specific mechanisation of a product to meet the requirements of the installation. - Degree of protection: IP65 / NEMA 1, 12. - Resistance to impact: IK10. - Ambient temperature range: -25 °C / +40 °C. - Maximum operating voltage: 1000 V AC. - Maximum temperature for sealing gasket: 80 °C. - Maximum temperature for polyester paint: 125 °C. TECNO INOX Technical Specifications (Stainless steel) - Degree of protection: IP65 / NEMA 1, 12, 4x. - Resistance to impact: IK10. - Ambient temperature range: -25 °C / +40 °C. - Maximum operating voltage: 1000 V. - Maximum temperature for sealing gasket: 80 °C. TECNO Certifications Compliant with the Low Voltage Directive 2014/35/EU. Standard: UNE-EN 62208. UL508A certificate.

Product series (Rolled steel) Standar - Boxes with plain sides and screw-on cover with depths of 95 mm and 135 mm. - Boxes with cable entry and screw-on cover with a depth of 135 mm. To order - Special boxes, dimensions, cut-outs, colours, etc... Supply Supplied in individual cardboard packaging containing the body, lid and the accesory bag. Accessory bag: - Screws plus caps for body-lid fixing. - Side and central brackets (central bracket only for boxes with height of 600 mm and 800 mm]. - Cable entry lid plus screws (only included in EXA type references]. - M8 caps for wall mounting and...

Body - Manufactured in coLd-roUed steel from a single cross-shaped part. - Sheet steel with a thickness of 1.2 mm. - Wall-mounting by means of four 0 9 mm cut-out holes 20x20 mm located from the outside. They can also be wall-mounted by means of a bracket that leaves a gap of 11 mm (supplied as an accessory). - Fixing lugs specially designed to achieve the perfect join between lid and housing, thus guaranteeing a watertight enclosure. - There is a 0 9 mm drainage cut-out at the base of the box in order to prevent condensation on the inside. - For the version of boxes with cable entry, the...

IP65 Rolled steel terminal boxes IP65 Boxes with cable entry and screw-on lid. Rolled steel Reference Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 2 Draw. 2 Draw. 2 Draw. 2 Draw. 2 Plate supports side CENT. Power dissipation according to temperature increase °C P(W)* IP65 Boxes with plain sides and screw-on lid. Rolled steel Reference Sheet thickness Plate supports Power dissipation according to temperature increase °C P(W)* BODY Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1 Draw. 1...

Boxes with plain sides Boxes with cable entry Dimensions: Rolled steel Tecno With plain sides With cable entry B IP65 STEEL TERMINAL BOXES

IP65 Stainless steel terminal boxes Product series (Stainless steel) Standar - AISI 304L and 316L stainless steel boxes, with plain sides and screw-on cover with depths of 90 mm and 135 mm. To order - AISI 304L and 316L stainless steel boxes with cable entry and screw-on cover with a depth of 135 mm. - Special boxes, dimensions, cut-outs, colours, etc. Supply Supplied in individual cardboard packaging containing body, lid and accessories bags. - Packaged box for greater protection. - Lid and body supplied unbolted. - Screws and washers for the body-lid mounting. - Plate height adjusters,...

--Manufactured in AISI 304L or 316L stainless steel from a single cross-shaped part. --The lid is totally flat, thus permitting the attachment of pilot lights, control elements --Reduced-width drainage fold and mounting wings specially designed to get the perfect fit between body and lid. --The inside of the lid is coated by a injected polyurethane sealing gasket that guarantees the unit’s IP65 protection. --M6x22 rivet nut on one side for external earth connection. --M6x10 bolt for connection guaranteeing mass continuity. --M6x10 earth connection bolt in both body and lid. --Lid closure...

TeCNO INOX IP65 Stainless steel terminal boxes IP65 Boxes with plain sides and screw-on lid. AISI 304L Stainless steel Reference Opening frame space Power dissipation according to temperature increase ºc p(w)* AISI 304L Stainless steel. Scotch 320 satin finish. Polyurethane sealing gasket. Max. Temperature 80 ºC. Boxes supplied without mounting plates. For special boxes, check availability of UL certificate. IP65 Boxes with plain sides and screw-on lid. AISI 316L Stainless steel Reference Opening frame space Power dissipation according to temperature increase ºc p(w)* AISI 316L Stainless...

Dimensions: Tecno stainless steel With plain sides

Reference Dimensions MATERIAL: Plain mounting plate in 2-mm thick galvanised steel. CHARACTERISTICS: Rolled steel boxes: They are fixed to the brackets by means of 4-mm sheet metal screws (not included). For bases with a central bracket, a single plate, double plate or a plate occupying half of the base may be fitted. Stainless steel boxes: The plate is fastened with M6 nuts to the M6x20 bolts on the base of the box (mounting accessories bag included in the box). FOR THE FOLLOWING BOXES: ELA - EXA.

Wall-mounting support Reference Description 48423 Galvanised wall-mounting support (4-piece pack) 48623 316L Stainless steel wall-mounting support (4-piece pack) MATERIAL: Galvanised steel or AISI 316L stainless steel. CHARACTERISTICS: They are attached to the rear part of the cabinet vertically or horizontally. 11-mm wall separation. Maximum horizontal or vertical load: 490 kg. SUPPLY: Pack of 4 supports. IP65 STEEL TERMINAL BOXES 11