HABITAT IP30 Flush-fit distribution boxes with plastic door The HABITAT series of flush-fit distribution boxes for hollow walls can be installed in prefabricated walls (such as plasterboard, wood, fibreboard, etc.) and in solid or brick walls. They are intended for the tertiary and residential sector and adapt perfectly to any kind of ambience, perfectly integrating into the surrounding decoration. HABITAT Technical Specifications - Degree of protection: IP30. - Resistance to impact: IK08. - Glow wire resistance: For hollow walls (30PH type): 850 °C in flush-fit bases. 650 °C in the rest of the set. Brick walls (30EM type): 650 °C. - Ambient temperature range: -25 °C / +40 °C. - Maximum operating voltage: 1000 V AC/1500 V DC. - Double insulation: Class II. Compliant with the Low Voltage Directive 2014/35/EU. Standards: UNE-EN 62208 and UNE-EN 61439-1 (as applicable).

Product series - 14, 28 and 42-module flush-fit enclosures with opaque window. - Version for hollow walls (30PH type). - Version for brick walls (30EM type). Material - Halogen-free plastic materials. - Frame and opaque window: ABS RAL 9003 white. - Base: PS RAL 7035 grey. Supply - Supplied in individual packaging. When several items are sent together, they are bundled together with transparent film. They are supplied with all the elements assembled, except for the ones supplied in the accessory bag. - Accessory bag: - White module cover (6 modules). - Module identification strips. - 4x13 screws....

Base --The flush-fit base is not a single part, but rather the top and bottom part are provided separately in order to facilitate the mounting and assembly of the distribution trunking. The top and bottom parts of the base have tabs that secure the trunking perfectly with flanges. --The top and bottom covers are inserted on specific side guides and then secured with 4x13 screws. It has a grid that the installer can use as a guide in order to easily cut out the area required depending on the diameter and the layout of the distribution trunking. It is important to fit the top and bottom covers...

HALOGEN-FREE PLASTIC MATERIALS For the PH references the wall-mounting elements are included Neutral and earth bars included in all references. Frame and window in RAL 9003 white ABS. Base in grey RAL 7035 PS. IP30 - Flush-fit. PH: References for hollow walls. Glow wire resistance 850 °C. * Calculations obtained according to the CEI 890:1 997 standard (including Corrigendum 1 998). Method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and control gear HABITAT SERIES

HABITAT Accessories HOLLOW-WALL MOUNTING DIN RAIL WHITE MODULE COVER MODULAR LIDS Neutral and earth bars In some markets, the technical regulations governing installation require neutral and earth conductors to be connected to a common busbar. The Habitat series frames have a series of tabs at the top and the bottom where the necessary bar supports can be fitted. These enclosures have different tabs along the frame wall so that the installer can use the ones that best suit the wiring distribution in the unit. All the references of this series are supplied with the neutral and earth bars included....

Head office Leonardo da Vinci 2 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Warehouse and logistics Guttemberg 48 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Phone: +34 976 451 080 E-mail: [email protected] Web: www.ide.es