ATLANTIC PLUS
11Pages

ATLANTIC PLUS IP40-IP55 Steel distribution cabinets (192-288 modules) The ATLANTIC PLUS series has been designed to satisfy the needs of large installations which, due to their construction characteristics, require a specific type of cabinet with average installed capacities, good modular capacity and an attractive design. They are available in two versions, IP40 detachable and IP55 compact, with a height of 2110 mm and a capacity from 192 to 288 modules. They are designed for use in public premises such as corridors in shopping malls, hospitals, hotels, schools, etc. C€ ATLANTIC PLUS Technical Specifications - Degree of protection: Combinable surface cabinets: IP40. Compact surface cabinets: IP55. - Resistance to impact: Opaque door: IK10. Transparent door: IK09. - Ambient temperature range: -25 °C / +40 °C. ATLANTIC PLUS Certifications Compliant with the Low Voltage Directive 2014/35/EU Standards: UNE-EN 62208 and UNE-EN 61439-1 (as applicable).

Product series Standard - IP40 combinable surface cabinets with opaque or transparent door. - IP55 compact surface cabinets with opaque or transparent door. - Modular capacity for 1810 mm cabinets: from 192 to 240 modules. - Modular capacity for 2110 mm cabinets: from 216 to 288 modules. Supply_ IP40 combinable surface cabinets They are supplied disassembled in a single packaging that contains: - Enclosure. - Sides. - Top and bottom cover. - Cable-entry cover. - Frame. - Plinth. - Door. - Accessory bag: Lifting and mounting pack, hinges, covers, cable-gland, screws, key, assembly...

IP40 COMBINABLE SURFACE CABINETS - Totally assemblable enclosure that is supplied disassembled to give the installer greater versatility and facilitate assembly and wiring. - The cabinet is supplied with a cover for cable entry at the top and the bottom. - The enclosure is a flat component with two profiles, to which all the unit’s equipment is secured. The profiles have two 25-mm rectangular cut-out lines to insert caged nuts to secure accessories, and a third line with 3 mm-diameter circular holes for screwing them directly to the wall. - Lifting and transport system based on two flanges...

ATLANTIC PLUS IP40-IP55 steel distribution cabinets IP55 COMPACT SURFACE CABINETS Enclosure - The enclosure consists of a single piece, with two profiles to which all the unit’s equipment is secured. - The profiles have two 25-mm rectangular cut-out lines to insert caged nuts to secure accessories, and a third line with 3 mmdiameter circular holes for screwing them directly to the wall. - Lifting and transport system based on two flanges secured to the base of the cabinet, included in the unit. - The 500x80 mm cable entries are located at the top and bottom. - The cable entries are covered...

COMPONENTS FOR BOTH IP40-IP55 CABINET VERSIONS Modular frame Cover + DIN rail kit - Modular frame for installing modular or blind lids. - A simple opening-closing system delivers quick and comfortable access to the inside of the enclosure, and the whole frame rotates freely without the need for cover-by-cover opening. - The frame is reversible in terms of both assembly and opening. - It has four holes at the front to run the cable to the door and thus guarantee the unit's mass continuity. If the holes are not used, they can be covered with watertight caps. - The plastic covers are clipped...

ATLANTIC PLUS IP40-IP55 steel distribution cabinets IP40 combinable surface cabinets Reference No. 40ENL192-240PO 40ENL192-240PT 40ENL216-288PO 40ENL216-288PT Cabinet dimensions Usable height space Modular capacity Maximum acceptable load Maximum acceptable load Power dissipation according to temperature increase °C P(W)* 20 321.2 321.2 369.8 369.8 IP55 compact surface cabinets Reference No. 55SUP192-240PO 55SUP192-240PT 55SUP216-288PO 55SUP216-288PT Cabinet dimensions Usable height space Modular capacity Power dissipation according to temperature increase °C P(W)* 20 321.2 321.2 369.8...

IP 40 IP 55 Hinged plastic covers 48242 DIN rail 24 modules + assembly supports MATERIAL: Galvanised steel. CHARACTERISTICS: Mounting system using depth-adjustable clips. 35x15 mm DIN rail. FOR THE FOLLOWING CABINETS: 40ENL-55SUP Reference No. Dimensions Number of modules MODULAR HEIGHT X WIDTH BLIND HEIGHT X WIDTH MATERIAL: ABS RAL 9003 white. CHARACTERISTICS: Hinged and reversible. They are closed by means of a clipping system. Fixed metal covers Reference No. Dimensions Number of modules ATLANTIC PLUS FIXED MODULAR HEIGHT X WIDTH MATERIAL: RAL 9003 white cold-rolled steel....

IP40-IP55 steel distribution cabinets Dimensions: IP40 combinable cabinets ATLANTIC PLUS SERIES

Atlantic PLUS Dimensions: IP55 compact cabinets ATLANTIC PLUS IP40-IP55 STEEL DISTRIBUTION CABINETS

Auxiliary module Reference No. Dimensions Usable space For cabinetHEIGHT XWIDTH XDEPTH HEIGHT ME401810 1810x430x250 1650 40ENL192-240 ME40211021 10x430x250195040ENL216-288 MATERIAL: RAL 9003 painted sheet steel. CHARACTERISTICS: Possibility of installing side or central auxiliary module. The cabinet and auxiliary module are joined by means of a jumper, leaving free inner passage space. Used for the installation of busbars, switches, control equipment etc., leaving more space inside the cabinet. Opaque door with a standard 4-point lock, double-bit insert with retractable handle in RAL 7016...

Head office Leonardo da Vinci 2 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Warehouse and logistics Guttemberg 48 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Phone: +34 976 451 080 E-mail: ide@ide.es Web: www.ide.es