ATEX Series Intended for potentially explosive atmospheres IDE presents its ATEX certified product range, specially intended for potentially explosive atmospheres, where the degree of protection and strength must be maximised. We offer an extensive range of ATEX certified equipment: IP66 wallmounting cabinets (Argenta ATEX Series) manufactured in rolled steel and stainless steel, as well as IP66 terminal boxes (Tecno ATEX series) in stainless steel. Both the stainless steel cabinets and terminal boxes are available in AISI 304L and 316L. The design and manufacture of this line of products has plenty of flexibility to adapt to special applications that require specific dimensions, to suit the requirements of the user and the facilities. ARGENTA ATEX Technical Specifications Wall-mounting cabinets - Degree of protection: Rolled steel cabinets: IP66 / NEMA 1,4, 12. Stainless steel cabinets: IP66 / NEMA 1,4, 4x, 12. - Resistance to impact: IK10. - Ambient temperature range: Cabinets with polyurethane sealing gasket: -25 °C / +60 °C. Cabinets with silicone rubber gasket: -55 °C / +100 °C. - Maximum operating voltage: 1000 V AC. TECNO ATEX Technical Specifications Terminal boxes - Degree of protection: IP66 / NEMA 1,4, 4x, 12. - Resistance to impact: IK10. - Ambient temperature range: With silicone rubber gasket: -55 °C / +100 °C. - Maximum operating voltage: 1000 V AC. Compliant with the 2014/34/UE directive. Certified by LOM: Cabinets with polyurethane sealing gasket (-25 °C / +60 °C). UNE-EN60079-0, UNE-EN60079-7 and UNE-EN60079-31 standards. Certified by Dekra: Cabinets with silicone rubber gasket (-55 °C / +100 °C). IECex Certificate. CEI 60079-0, CEI 60079-31 and CEI 60079-7 standards. © II 2G - Ex e IIC Gb. II 2D - Ex tb IIIC Db. Compliant with the 2014/34/UE directive. Certified by DEKRA: Boxes with silicone rubber gasket (-55 °C / +100 °C). Compliant with the IECex and CEI 60079-0, CEI 60079-31 and CEI 60079-7 standards. © II 2G - Ex eb IIC Gb. II 2D - Ex tb IIIC Db.

Directive 2014/34/EU relating to equipment and protective systems intended for use in potentially explosive atmospheres. This term is used to refer to potentially explosive atmospheres, as well as to the standards regulating the use of protection equipment and systems in this type of atmosphere. An explosive atmosphere is defined as any mixture, in atmospheric conditions, of air and inflammable substances in the form of gas,vapours or dust, in which, following ignition, combustion spreads to the entire uncombusted mixture. Potentially explosive atmosphere: An atmosphere which could become explosive...

WHICH PARTS OF ATEX DOES IDE OFFER COMPLIANCE WITH? Group II: NON-mining_ Gases IIC (Hydrogen and similar) Dust IIIC (Conductive dust) IDE Label <©> ATEX symbol according to the directive. II: Equipment intended for use in places other than mines with the presence of explosive atmosphere. 2: Product category. Explosive atmospheres that cause gases, vapours and a mixture of air/dust. GD: Gas and dust. Ex: ATEX -compliant product. IIC: Type of gas: Hydrogen and similar. Gb/Db: Protection from dust and gas for nonelectrical equipment. "Control of sources of ignition". e: Protection mode: "Increased...

Product series (Rolled steel) Standar - ATEX opaque door cabinets in COLD-ROLLED STEEL with mounting plate, and injected polyurethane sealing gasket. To order - ATEX opaque door cabinets in COLD-ROLLED STEEL without mounting plate. (Add /SP to the standard reference). - Cabinets with silicone rubber gasket, increasing ambient temperature range up to -55 °C / +100 °C. Supply Supplied in individual packaging containing cabinet, plate and accessory bag. Blind plate: - For cabinets with a height of up to 700 mm it is supplied unassembled inside the packaging. - For cabinets with a height of up to...

Body - Manufactured from a single cross-shaped part. - Totally reversible cabinet. - Sheet thickness: 1.2 mm for cabinets from 300x200 to 600x500 mm. 1.5 mm for cabinets from 600x600 to 1000x800 mm. - Four M8x25 bolts at the back of the cabinet for securing plates, adjustment elements or chassis. - M6x10 earth bolt located on the cabinet wall for joining body and door by means of earth wire. - The cabinet has a M6x15 rivet nut for earthing. - Double fold to prevent water from entering the cabinet. - M6 rivet nuts at the base of the cabinet to attach the 4 wall hangers included in the unit (11-mm...

ARGENTA ATEX Cabinet dimensions Sheet thickness Cable entry Reinf. prof. Power dissipation according to temperature increase ºC P(W)* IP66 / NEMA 1, 4, 12. RAL 7035 rolled steel. Injected polyurethane sealing gasket. Ambient temperature range: -25 ºC / +60 ºC. 3P: 3-point lock. Cabinets supplied with mounting plate. Pack of 4 plate height adjusters supplied in all references, even in those without plate /SP. For references without plate, add /SP; e.g.: ATX403020/SP (check availability). * Calculations obtained according to the CEI 890:1997 standard + Corrigendum 1998; "Method of temperature-rise...

Argenta ATex rolled steel Maximum acceptable loads Total load Cabinets from 300x200x150 to 300x300x200 Cabinets from 400x300x200 to 400x300x200 Cabinets from 400x400x200 to 600x400x250 Cabinets from 600x500x250 to 700x500x250 Cabinets from 800x600x300 to 800x800x300 Cabinets from 1000x800x300 Dimensions: Argenta ATEX rolled steel Single door B-3 CABLE ENTRY Blind plate ATEX SERIES FOR POTENTIALLY EXPLOSIVE ATMOSPHERES

Product series (Stainless steel) Standard - ATEX opaque door cabinets in AISI 304L and 316L STAINLESS STEEL with mounting plate, and injected silicone rubber gasket. To order - ATEX opaque door cabinets in AISI 304L and 316L STAINLESS STEEL without mounting plate (add /SP to the standard reference). Supply Supplied in individual packaging containing cabinet, plate and accessory bag. The cabinet is protected by a plastic bag. Blind plate - For cabinets with a height of up to 700 mm they are supplied unassembled inside the packaging. - For cabinets with a height of up to 800 mm and above they are supplied...