ARGENTA IP66 Steel wall-mounting cabinets The ARGENTA Series is a group of steel enclosures used to house electrical or electronic switchgear, control gear and equipment necessary to supply, distribute and transform electricity in industrial installations. This series comprises an extensive range of standard models made with premium-quality materials in cold-rolled steel plate. The design and manufacture of this product line is flexible and can be customized for settings that require specific dimensions depending on user requirements and installations. The full range is accompanied by a set of complementary accessories: mounting plates, inner doors, canopies, eyebolts, ventilation systems, chassis, etc. ARGENTA Technical Specifications (Rolled steel) - Degree of protection: Single-door cabinets: IP66 / NEMA 1, 12, 4. Double-door cabinets: IP55 / NEMA 1, 12. - Resistance to impact: Opaque door: IK10. Transparent door: IK09. - Ambient temperature range: -25 °C / +40 °C. - Maximum rated operating voltage: 1000 V AC / 1500 V DC ARGENTA Certifications (Rolled steel) Compliant with the Low Voltage Directive 2014/35/EU. Standards: UNE-EN 62208 and UNE-EN 61439-1 (as applicable). UL508A and Gost-R certificates. Bureau Veritas according to UNE-EN 62208 standards. Certificate for boats. VDE Certificate available for single-door cabinets.

Product series (Rolled steel) Standard - Opaque door cabinets with mounting plate. - Transparent single-door cabinets with mounting plate (add GNT to the reference). To order - Opaque door cabinets without mounting plate (add /SP to the standard reference). - Special cabinets, dimensions, cut-outs, colours, etc. Supply - Supplied in individual packaging containing cabinet, plate and accessory bag. Plain mounting plate - For cabinets with a height of up to 700 mm they are supplied unassembled inside the packaging. - For cabinets with a height of up to 800 mm and above they are supplied assembled....

Enclosure - Manufactured in cold-rolled steel from a single cross-shaped part. - Totally reversible cabinet. - Sheet thickness: 1.2 mm for cabinets from 250x200 to 600x500. 1.5 mm for cabinets from 600x600 to 1400x1000 mm. - Wall-mounting by means of four 09 mm cut-out holes. - Wall-mounting support leaving a gap of 11 mm (supplied as an accessory!. - Four M8x25 bolts at the back of the cabinet for securing plates, adjustment elements or chassis. - M6x10 earth bolt located on the cabinet wall for joining enclosure and door by means of earth wire. - 2-mm thick cable entry lid with sealing gasket...

ARGENTA SERIES

IP 66 IP66 opaque single-door cabinets. Rolled steel Reference No. Sheet thickness Power dissipation according to temperature increase °C P(W)* 20 Single-door cabinets: IP66 / NEMA 1, 4, 12. Cold rolled steel primed and painted RAL 7035. Injected polyurethane sealing gasket. 3P: one 3-point lock. Cabinets supplied with mounting plate. For references without plate, add /SP; e.g.: GN403015/SP. Pack of 4 plate height adjusters supplied in all references, even in those without plate /SP. For references with transparent door, add GNT; e.g.: GNT403015. Transparent doors from 250x200 to 300x300 mm:...

Double-door cabinets: IP55 / NEMA 1, 12. Cold rolled steel primed and painted RAL 7035. Injected polyurethane sealing gasket. 3P: one 3-point lock. Cabinets supplied with mounting plate. For references without mounting plate, add /SP; e.g.: GN6012030PD/SP. Pack of 4 plate height adjusters supplied in all references, even in those without plate /SP. VDE certificate only available for single-door cabinets. For special cabinets and cabinets without plate, check availability of UL certificate. * Calculations obtained according to the CEI 890:1997 standard + Corrigendum 1998; “Method of temperature-rise...

IP 55 IP 66 C€ Total load Door Plate Dimensions: Argenta rolled steel Single door IP66 STEEL WALL-MOUNTING CABINETS 7

Dim. Dim. Sheet No. No. Reinf. „,-ut Power dissipation according to cabinet plate thickness locks hinges profiles temperature increase °C P(W)* H X W X D HEIGHTXWIDTH ENCL. DOOR KG 20 25 30 35 40 Cold rolled steel primed and painted RAL 7035. Injected polyurethane sealing gasket. Cabinets supplied with mounting plate. Pack of 4 plate height adjusters supplied. It is not compatible with the assembly of a chassis or inner door. * Calculations obtained according to the CEI 890:1 997 standard + Corrigendum 1 998; "Method of temperature-rise assessment by extrapolation for partially type-tested assemblies...

- Made of cold rolled steel, primed and painted RAL 7035. - Injected polyurethane sealing gasket. - Supplied without side panels. - Welded reinforcement profiles with cut-out holes with a separation of 25 mm for fitting accessories. - Four dies in the upper part to install eyebolts. It is necessary to order reference number 48475 as an accessory. - No cable entry. Side panels Mounting plate - Side panels: Supplied as an accessory, reference PLA6040, including two panels. - Flat mounting plate included in all cabinet references. - Made of cold rolled steel primed and painted RAL 7035. - Made from...

Head office Leonardo da Vinci 2 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Warehouse and logistics Guttemberg 48 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Phone: +34 976 451 080 E-mail: [email protected] Web: www.ide.es