ARGENTA PLUS (FSC) IP55-IP65 steel floorstanding semi-compact cabinets The Floor-Standing Cabinets of the ARGENTA PLUS series are a set of industrial steel enclosures designed to contain any type of electrical device and equipment necessary for the supply, distribution and conversion of electricity and are suitable for control and automation equipment for industrial plants and machine tools. SEMI-COMPACT (FSC) Technical Specifications - Degree of protection: Single-door cabinets: IP65* / NEMA 1, 12, 4. Double-door cabinets: IP55 / NEMA 1, 12. - Resistance to impact: Enclosure and opaque doors: IK10. Transparent doors: IK09. - Ambient temperature range: -25 °C / +40 °C. * With the 48690 insulation kit. Compliant with the Low Voltage Directive 2014/35/EU. Standards: UNE-EN 62208 and UNE-EN 61439-1 (as applicable). UL508A and Gost-R certificate. VDE Certificate available for single-door cabinets. This range of cabinets has been designed for maximum versatility so that the installer can create their own arrangements depending on their needs. It is highly functional thanks to the different possibilities for joining cabinets together, the possibility of installing any type of electrical device and the comprehensive range of accessories available for this series.

ARGENTA PLUS SEMI-COMPACT (FSC) IP55-IP65 steel floor-standing semi-compact cabinets Product series - Opaque and transparent door cabinets without mounting plate. - Single door up to width of 1000 mm. - Double door as of width of 1000 mm. - Height: 1650 - 1800 - 2000 mm. - Width: 600 - 800 - 1000 - 1200 - 1600 mm. - Depth: 400 - 500 mm. Supply Supplied on pallets, protected with honeycomb cardboard corner pieces and shrink-wrap film. The plate can be supplied assembled on request. - 2 lifting eyebolts fitted. - Key. - Assembly instructions. * Plinth supplied as accessory. Professional solutions...

Enclosure Single and symmetrical enclosure comprised of: - Closed sides made of 1.5-mm thick sheet. - Exterior profiles with a tubular structure that affords the unit great solidity. - Metal parts welded internally to the cabinet structure to guarantee maximum rigidity and yield strength. - Covered with 14x9 square cut-outs for caged nuts and round cut-outs with a diameter of 4.65 for machined screws. Distance between cut-outs is 25 mm. Rear panels - Made from sheet with a thickness of 1.5 mm. - Sealing gasket to guarantee IP55/IP65 protection. - M6 countersunk screws for attachment. - Reversible...

IP55-IP65 steel floor-standing semi-compact cabinets Single-door cabinets without mounting plate. Rolled steel. IP65* semi-compact Dimensions Door Cable entry Glass door with transp. Weight panel_ Power dissipation according to temperature increase °C P(W)** Double-door cabinets without mounting plate. Rolled steel. IP55 semi-compact Cable entry Glass door with transp. panel Power dissipation according to temperature increase °C P(W)** OPAQUETRANS. WIDTH X DEPTH HEIGHT X WIDTH PO PT 770x310 1436x430 Single-door cabinets: IP65 / NEMA 1, 4, 12. Double-door cabinets: IP55 / NEMA 1, 12. Cold rolled...

Maximum lifting loads Maximum load declared according to the number of lifting eyebolts and the angle of the chain: β ARGENTA PLUS It is not recommended to lift the cabinet when the angle between chains is greater than 120°. The weight must be evenly distributed. Semi-compact opaque door cabinet Semi-compact opaque double door cabinet Semi-compact transparent door cabinet Semi-compact transparent double door cabinet

Single door Front Side section Mounting plate Ground plan Ground plan section ARGENTA PLUS SERIES

IP 65 Dimensions: Argenta Plus semi-compact Side section Ground plan section ARGENTA PLUS B/2-214 IP55-IP65 STEEL FLOOR-STANDING CABINETS

Head office Leonardo da Vinci 2 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Warehouse and logistics Guttemberg 48 Pol. Ind. Los Huertos E-50800 Zuera (Zaragoza) SPAIN Phone: +34 976 451 080 E-mail: [email protected] Web: www.ide.es